Page 2 - Contents
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Inserting batteries . . . . . . . . . . . . . . . . . . . . . . . . . 4Using the optional AC adapter . . . . . . . . . . . . . 5Ins...
Page 3 - Solving Problems
2 | Contents Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Problems and solutions . . . . . . . . . . . . . . . . . . . 28 Epson Technical Support . . . . . . . . . . . . . . . . . . 30 Recycling . . . ....
Page 4 - Welcome; Your LabelWorks; Cable and Wire Label Kit
Welcome | 3 Welcome Your LabelWorks TM Cable and Wire Label Kit lets you create custom labels to help you identify your cables, wiring, and other cords. Barcode labels allow you to label equipment for use with your asset management system. Add identifiers or custom text to your labels along with sym...
Page 5 - Getting Started; Inserting batteries; Insert 6 AA alkaline batteries, positioning
4 | Getting Started Getting Started Your LabelWorks printer requires 6 AA batteries (not included). An optional AC adapter is also available (C52CB73020). Follow the instructions in this section to insert the batteries and tape cartridge. Inserting batteries 1. Remove the rear cover. 2. Insert 6 AA ...
Page 6 - Using the optional AC adapter; Plug in the AC adapter as shown.; Inserting a label cartridge; Remove the rear cover.
Getting Started | 5 Using the optional AC adapter Plug in the AC adapter as shown. Caution: Make sure you use only the AC adapter designed for your LabelWorks printer (C52CB73020) or damage may occur. Inserting a label cartridge 1. Remove any slack from the label. 2. Remove the rear cover. cable.boo...
Page 7 - Removing a label cartridge
6 | Getting Started 3. Insert the cartridge and press it down firmly until it snaps into place. 4. If there is excess label, feed the end through the tape guide slot. 5. Replace the cover and snap it into place. 6. Press to turn on the printer. Removing a label cartridge 1. Remove the rear cover. 2....
Page 8 - Creating Labels; Entering text; You can print up to four lines of text,; Creating long labels; You’ll see a
Creating Labels | 7 Creating Labels Enter text to begin creating your label. Then follow the suggestions for adding length if necessary. Entering text Use the built-in keyboard to enter letters and numbers. ■ Press to use upper case for all letters, or + character for a single letter. ■ Press to del...
Page 9 - Saving Labels; Deleting labels; Enhancing Your Labels; Use clear labels for a professional look.; Adding symbols; To cancel and return to the previous
8 | Saving Labels Saving Labels You can store up to 50 saved labels at a time. After you finish creating your first label, press + to create another label (the label number appears to the left of the text). Your first label is automatically saved. Deleting labels 1. Press + or + to select a label fo...
Page 10 - Symbols
Enhancing Your Labels | 9 Symbols Prohibition Household Food Sports Activity cable.book Page 9 Wednesday, May 22, 2013 3:25 PM
Page 14 - Adding frames; to select the frame you want to use.; ABC
Enhancing Your Labels | 13 Adding frames Frames include borders and symbols for activities and other purposes. 1. Press . 2. Press to scroll through the frames or enter the frame number to jump directly to a frame, then press to select the frame you want to use. Note: To quickly remove a frame from ...
Page 16 - Changing the font size; The size you select is indicated on the; Changing the font
Enhancing Your Labels | 15 Changing the font size You can change the size of the letters, numbers, and symbols on your label. 1. Press . 2. Press to select a 1-4 line layout, then press . You see squares representing the text, and numbers representing the available size variations. Note: If you sele...
Page 17 - Changing the font style; Styles applied to small or elaborate; Printing Labels; Do not press the
16 | Printing Labels Changing the font style Personalize your label text with bold, italic, shadow, and outline effects. 1. Press . 2. Press to scroll through the styles, then press to select the one you want. Note: Styles applied to small or elaborate characters may not print clearly. You can choos...
Page 18 - Printing multiple copies; Customizing Your Labels; Creating vertical text; Vertical
Customizing Your Labels | 17 Printing multiple copies You can print up to 9 copies of a label on one label. This lets you create longer labels for panels with multiple input/outputs or other equipment. 1. Press . You see 2-9 on the display. 2. Press a number key to enter the number of copies (2-9). ...
Page 19 - Adding space between characters; Selecting narrow characters; Narrow; Increasing print density; Print density; Adding punctuation
18 | Customizing Your Labels Adding space between characters You can add extra space between the letters, numbers, and symbols on your label. 1. Press . 2. Press until you see Char. spacing , then press to select it. 3. Press to change from Narrow to Wide , then press . Selecting narrow characters Y...
Page 20 - Adding letters with an accent mark; Label length; Selecting Auto will adjust the length; On; Using mirror-image text
Customizing Your Labels | 19 ■ Press repeatedly to scroll through the first group of marks, then press to select the desired mark. ■ Press + , then press repeatedly to scroll through the second group of marks. Then press to select the desired mark. Adding letters with an accent mark You can choose f...
Page 21 - Mirror print
20 | Cable and Wire Management 1. Press . 2. Press until you see Mirror print , then press to select it. 3. Press to select On , then press . Creating sequentially numbered labels You can create a label, and then print numbered copies of it. 1. Create your label as described on page 7. 2. Press or t...
Page 22 - Flag labels; to select a flag type (; Flag label tips
Cable and Wire Management | 21 Flag labels Flag labels provide a large surface for multiple lines of text. A vertical line marks the center of the flag to help wrap the cable evenly. 1. Press . 2. Press to select a flag type ( Flag: Hori. , Flag: Vert. , or Flag: Edge ), then press . 3. Press to sel...
Page 23 - Wrapped labels; until you see; Wrap; to select the length, then press; Wrap label tips; Include a label on both ends of the cable.
22 | Cable and Wire Management Wrapped labels Wrapped labels are useful for tight spaces where flags are too large or only a short identifier is necessary. 1. Press . 2. Press until you see Wrap , then press to select it. 3. Press to select the length, then press . 4. Enter your text, then press . W...
Page 24 - Asset Management; Organizing with labels; Width
Asset Management | 23 Asset Management Use labels to organize and track inventory, equipment, and other assets. Organizing with labels LabelWorks labels can be used in many different ways to improve the organization of your home or office. ■ Label file cabinets for easy file retrieval ■ Use flag lab...
Page 25 - Adjusts the space between the bars; Index tab labels; Index tabs are only available when
24 | Asset Management The following barcode settings can be modified: Width: Adjusts the space between the bars of the barcode. Ratio: Adjusts the width of the wide bars in the barcode (2, 2.5, or 3 thin bar widths). Check Digit: Determines whether a check digit is included in the barcode (for error...
Page 26 - Adjusting the Display; Never use chemicals or solvents such; Cleaning the print head
Adjusting the Display | 25 Adjusting the Display You can adjust the following display settings: Backlight: Turns the backlight of the display on or off. Contrast: Adjusts the density of the fonts on the display. Language: Changes the language of the settings and messages on the display. inch:cm: Sel...
Page 27 - Storing Your Kit
26 | Storing Your Kit Storing Your Kit Two LabelWorks cartridges LabelWorks AC adapter (optional) LabelWorks LW-400 Six AA batteries (available separately) cable.book Page 26 Wednesday, May 22, 2013 3:25 PM
Page 28 - Error messages
Solving Problems | 27 Solving Problems If you have a problem with your LabelWorks, check the display or the troubleshooting suggestions below. Error messages Insert tape Turn the power off and install a tape cartridge. Check tape! An incompatible tape cartridge has been installed. Check the tape car...
Page 29 - Problems and solutions; The product does not function normally; Resetting your product will erase all
28 | Solving Problems Problems and solutions Check the solutions below if you are having trouble using your product. The product does not function normally The product may stop functioning due to static electricity or other causes. If your product does not function normally (for example, the power d...
Page 30 - The display turns off; Make sure text has been entered.; Characters do not print properly; Clean the print head.; Printing stops in the middle of text; Install a new tape cartridge.; Saved labels are gone
Solving Problems | 29 ■ If you are using the AC adapter, make sure that it is securely connected to both the wall outlet and the product. ■ Adjust the contrast as described on page 25. The display turns off ■ The power turns off automatically if the product is idle for more than 5 minutes. ■ If an i...
Page 31 - Cannot attach the label; Epson Technical Support; Visit; support; To speak with a support specialist, call:; Recycling; recycle; for information on how to return
30 | Epson Technical Support ■ If the AC adapter is unplugged or the batteries are removed during operation, the text may be deleted. Cannot attach the label ■ Make sure to peel off the backing paper before attaching the label. ■ Make sure the surface you are attaching to is clean and dry. The label...
Page 32 - Purchase supplies and accessories; Registration; Go to; Product Registration.
Registration | 31 Purchase supplies and accessories Epson offers a wide array of tapes for multiple uses. For a complete list of available tapes, including additional widths, visit epson.com/LW400Tapes . You can purchase tape cartridges and accessories at: www.epson.com/LabelWorks (U.S. sales) or ww...
Page 33 - Specifications; Safety instructions
32 | Specifications Specifications Notices Safety instructions Before using your product, read the following safety instructions to make sure you use it safely and effectively. ■ Always use the product as instructed in the manual. Otherwise, damage or injury may occur. ■ Do not subject the product t...
Page 34 - Batteries
Notices | 33 Continuing to use the product may result in damage or injury. ■ To avoid injury, keep your fingers away from the label exit slot when printing or using the cutter. ■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. ■ Do not place or s...
Page 35 - AC adapter; Tape cartridges
34 | Notices ■ Remove dead batteries promptly. ■ Do not heat batteries or throw them in fire or water. ■ Do not remove batteries with metal objects such as tweezers or the tip of a pen. ■ Make sure to follow local battery disposal regulations. AC adapter ■ Use only model C52CB73020 AC adapter and po...
Page 36 - About printed labels; For United States Users; For Canadian Users
Notices | 35 ■ Do not try to print with an empty tape cartridge; this may overheat the print head and damage the product. Note: Tape cartridges contain ink ribbons. Make sure to follow local ink disposal regulations. About printed labels Attached labels and adhesive are affected by the type of surfa...
Page 39 - Trademarks
38 | Notices exclusions may not apply to you. This warranty gives you specific legal rights and you may have other rights which vary from jurisdiction to jurisdiction. To find the Epson Authorized Reseller nearest you, visit our website at http://www.epson.com. To find the Epson Customer Care Center...
