Epson (IU-01)- User Manual

Introduction The Interactive Unit is a wall-mounted receiver that works with your projector to turn virtually any surface into an interactive whiteboard. You can use it withyour existing ceiling-mounted projector and standard whiteboard. The Interactive Unit includes all the hardware and software yo...

• Lightweight and easy to install • Includes wall plates and mounting hardware • Includes the Easy Interactive Driver software for using the pens withyour computer • Includes two battery-operated pens that work with most Windows andMacintosh computers a You can also download the optional Easy Intera...

Interactive Unit Name Function A Easy Inter activeFunction r eceiv er Receives signals from the Easy Interactive Pen. B Wall plate cov er Covers the connection between the Interactive Unit andthe wall plate. C Wall plate Use this to mount the Interactive Unit. This illustrationshows the long wall pl...

Pen Tray Name Function A Fix ing points Attach the pen tray to a whiteboard or wall. B S ecur ity hole Pass a commercially available lock through here. a It is recommended that the pen tray be tightened with twocommercially available M5 bolts. Parts Location 10

Getting Started Before you can use your Interactive Unit, you need to install the software and connect the cables to your computer.

This section explains how to install the software for the pens. Even if you already have interactive whiteboard software, you must installthe Easy Interactive Driver from the CD labeled "Epson Projector Softwarefor Easy Interactive Function." a Insert the CD labeled "Epson Projector Soft...

Before you can use the pen, you need to install the batteries. To check thebatteries, press the button on the pen. If the indicator light is green, thebatteries have enough power. s p.9 If you need to install or replace the batteries, use two alkaline AAAbatteries. a Press in the tab on the battery ...

VGA computer cable USB cable First you need to make sure that your computer is connected to yourprojector using the VGA computer cable that came with the projector. Connecting the VGA Computer Cable a Locate the VGA computer cable connected to the projector. b Connect the other end of the cable to y...

Using the Easy Interactive Pen The Easy Interactive Pen included with your Interactive Unit turn almost any wall or board into an interactive whiteboard. This chapter tells you how tocalibrate your system and use the pens.

Calibration sets up the connection between your computer and the EasyInteractive Pen. This simple process ensures that your computer canaccurately detect the position of the pen on the projection surface. You need to calibrate before using the pen for the first time, or if youchange the resolution o...

The Easy Interactive Driver allows you to use the pen as a mouse. If youinstalled interactive whiteboard software, you can also use the pens to writeor draw on the projected image. s p.9 Press the button on the pen to test the batteries. If the indicator light isgreen, the batteries have enough powe...

Solving Problems If you have a problem with your product, you can check the following section for troubleshooting information.

Easy Interactive Pen Problems • Make sure the USB cable is securely connected to the Interactive Unitand computer. Try disconnecting and reconnecting the cable to yourcomputer. • If you don't see the pen icon on your taskbar (Windows) or in the Dock (Mac OS), do one of the following: Windows Select ...

If you notice any problems or you think the Interactive Unit is broken, stopusing it and contact your local dealer for further advice. Or visit http:// www.epson.com to locate a support or service representative in your area. Check the website periodically for updates to the Easy Interactive Drivers...

General Image size 63 to 102 inches (4:3 XGA) 60 to 96 inches (16:10 WXGA) 58 to 93 inches (16:9 widescreen) Weight Approximately 2.3 kg (5.08 lb) with long wall plateApproximately 1.8 kg (3.97 lb) with short wall plate1.45 kg (3.2 lb) without wall plate Dimensions Units: mm (in.) 1051 (41.38) 120 (...

For United States Users This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates,...

According to 47CFR, Part 2 and 15 for: Class B Personal Computers andPeripherals; and/or CPU Boards and Power Supplies used with Class BPersonal Computers: We: Epson America, Inc. Located at: MS 3-133840 Kilroy Airport WayLong Beach, CA 90806Telephone: (562) 290-5254 Declare under sole responsibilit...

All rights reserved. No part of this publication may be reproduced, stored in a retrievalsystem, or transmitted in any form or by any means, electronic, mechanical,photocopying, recording, or otherwise, without the prior written permission of SeikoEpson Corporation. No patent liability is assumed wi...