Page 2 - Declaration of Conformity
iDP3410 User's Manual CITIZEN Declaration of Conformity Manufacturer's Name : Japan CBM Corporation Manufacturer's Address : CBM Bldg.,5-68-10, Nakano, Nakano-ku, Tokyo164-0001, Japan Declare the Product Product Name : Dot Matrix Printer Model Number (s) : iDP3410(iDP3410R/P, iDP3410S/C, iDP3410T/I)...
Page 3 - CITIZEN; IMPORTANT SAFETY INSTRUCTIONS; Read all of these instructions and save them for future reference.
iDP3410 User's Manual CITIZEN IMPORTANT SAFETY INSTRUCTIONS • Read all of these instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Usea damp ...
Page 4 - WICHTIGE SICHERHEITSANWEISUNGEN; Der Drucker darf nicht in der Nähe von Wasser aufgestellt werden.; Lärmemission kleiner 70dBA
iDP3410 User's Manual CITIZEN WICHTIGE SICHERHEITSANWEISUNGEN • Lesen Sie die nachfolgenden Anweisungen sorgfältig durch und bewahren Sie sie auf. • Befolgen Sie alle auf dem Drucker vermerkten Hinweise und Anweisungen. Vor dem Reinigengrundsätzlich Stecker aus der Steckdose ziehen. Keine Flüssigkei...
Page 5 - CAUTION: Use shielded cable for this equipment.; Pour L’utilisateurs; Canadiens
iDP3410 User's Manual CITIZEN IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has beentested and found to comply with the limits for a Class A...
Page 7 - This is an illustration mark used to alert your attention.
iDP3410 User's Manual CITIZEN SAFETY PRECAUTIONS ----- BE SURE TO OBSERVE In order to prevent hazards to an operator or other persons and damage to property, be sure to observe thefollowing precautions. The following describes the degrees of hazard and damages that can occur if the given instruction...
Page 9 - PRECAUTIONS FOR INSTALLATION; Do not put any object on the printer. It may cause trouble.
iDP3410 User's Manual CITIZEN PRECAUTIONS FOR INSTALLATION • Do not use or store the equipment in a place exposed to fire, moisture, or direct sunlight, or in a place near aheater or a thermal device where the prescribed operating temperature and humidity are not met, or in aplace exposed to much oi...
Page 10 - PRECAUTIONS FOR HANDLING; Do not use a power supply other than the specified AC adapter.
iDP3410 User's Manual CITIZEN PRECAUTIONS FOR HANDLING Do not handle the equipment in the following manners, because problems may result. • Do not use a power supply other than the specified AC adapter. • Do not print when there is no recording paper or ink ribbon set in the equipment. The print hea...
Page 11 - DAILY MAINTENANCE
iDP3410 User's Manual CITIZEN DAILY MAINTENANCE • Prior to starting maintenance work, be sure to turn off the main body. • Use a dry soft cloth to wipe off stains and dust from the surfaces of the main body case. For severe soiling,dip the cloth in water and wring it, for wiping off the soil. Never ...
Page 12 - CONTENTS
iDP3410 User's Manual CITIZEN CONTENTS 1. OUTLINE ............................................................................................................................................... 1 1.1 Features ..............................................................................................
Page 15 - CAUTION
iDP3410 User's Manual 1 CITIZEN 1. OUTLINE This is a small-size dot impact printer developed for various data communication terminals, POS terminals,kitchen-use printers, bank card, terminals, and so on.Its abundant built-in features allow you to widely use this printer for different applications. P...
Page 16 - BASIC SPECIFICATIONS; Model Name
iDP3410 User's Manual 2 CITIZEN 2. BASIC SPECIFICATIONS 2.1 Model Classification The printer model is classified by the following designation method. iDP3410 - R F 120 Model Name ♦ Exclusive AC Adapter Types and Power Cords • 34AD-U (120 V 2-core cord) • 34AD-E (230 V 2-core cord) AC adapter120: For...
Page 17 - Basic Specifications
iDP3410 User's Manual 3 CITIZEN 2.2 Basic Specifications Model Item iDP3410-*F120 iDP3410-*F230 Printer mechanism DP-410 Series (CITIZEN) Print method Serial dot impact method (Bi-directional print) Print width 64 mm Print head 9 pins Print speed Approx. 3 lines/sec. (At single-color continuous prin...
Page 18 - Paper Specification
iDP3410 User's Manual 4 CITIZEN 2.3 Paper Specification 2.3.1 Recommended Paper • Type : Normal paper and non-carbon paper • Paper width : 76 +/- 0.5 mm • Paper thickness : Single-sheet paper --- 45 ∼ 55 kg / 1,000 sheets / 1,091 x 788 mm; Copying paper --- Non-carbon paper, 1 original + 1 copy,Tota...
Page 19 - OUTER APPEARANCE AND COMPONENT PARTS
iDP3410 User's Manual 5 CITIZEN 3. OUTER APPEARANCE AND COMPONENT PARTS
Page 20 - Connecting AC Adapter; Use only the specified AC adapter.
iDP3410 User's Manual 6 CITIZEN 4. OPERATION 4.1 Connecting AC Adapter (1) Turn off the Power switch. (2) Connect the cable connector of the AC adapter to the power connector located on the back of the printer. (3) In order to prevent disconnection of the cable connector, put it through a wire saddl...
Page 21 - Connecting Interface Cable; connector located on the back of the printer.
iDP3410 User's Manual 7 CITIZEN 4.2 Connecting Interface Cable (1) Turn off the power. (Mating side included)(2) Check the top and bottom of the cable terminals, and connect to the interface connector.(3) Fix the cable terminals. • Serial Interface: Tighten screws, to fix. • Parallel Interface: Turn...
Page 22 - Setting the Cassette Ribbon
iDP3410 User's Manual 8 CITIZEN 4.4 Setting the Cassette Ribbon (1) Open the printer cover.(2) If the ribbon is slackened, turn the knob in the arrow-indicated direction to give the tension to it before setting. (3) While putting the ribbon in between the head cover and platen, push the locking claw...
Page 23 - Inserting the Paper; Be sure to use the specified paper roll.
iDP3410 User's Manual 9 CITIZEN 4.5 Inserting the Paper (1) Put your hands in the concave parts on both sides of the printer cover, and open it until it comes to a stop.(2) Cut the end of the paper roll at close to a right angle. CAUTION : • Be sure to use the specified paper roll. • Use of unspecif...
Page 24 - While printing, do not hold the paper. This can cause a paper jam.
iDP3410 User's Manual 10 CITIZEN CAUTION : • If the paper is slack, rewind it, to remove the slack. • If the paper is set slantwise, operate the paper-free lever, to correct the paper position. • While printing, do not hold the paper. This can cause a paper jam.
Page 25 - How to Remove Remaining Paper Roll; allowing you to eliminate the jammed paper.
iDP3410 User's Manual 11 CITIZEN 4.6 How to Remove Remaining Paper Roll (1) Open the printer cover.(2) Pushing the paper-free lever in the arrow direction, pull out the paper roll. CAUTION : When pulling out the paper (Forward/Reverse direction), be sure to operate the paper-free lever. 4.7 Removing...
Page 26 - Operation Panel and Display of Error; Illuminated when the power is turned on.
iDP3410 User's Manual 12 CITIZEN 4.8 Operation Panel and Display of Error (1) POWER lamp(Green) Illuminated when the power is turned on. (2) ERROR lamp(Red) Illuminated when the printer is out of paper or has a printer mechanical error or communication error. <Details of Errors> • Paper end --...
Page 28 - DIP SWITCH SETTING; (Only DS1 provided for the parallel interface)
iDP3410 User's Manual 14 CITIZEN 5. DIP SWITCH SETTING 5.1 Location of DIP Switch (1) Turn off the power.(2) Remove a cassette ribbon. The DIP switches are located as shown in the figure below. (Only DS1 provided for the parallel interface)
Page 29 - DIP Switches Setting
iDP3410 User's Manual 15 CITIZEN 5.2 DIP Switches Setting 1) DIP Switch 1 No. Function ON OFF Upon Shipment from Factory DS1-1 Auto cutter Yes No OFF DS1-2 International characters ON *2 DS1-3 ″ ON *2 DS1-4 ″ See the Table below ON *2 DS1-5 Paper used 2P 1P OFF DS1-6 CR mode See the Table below OFF ...
Page 30 - Note
iDP3410 User's Manual 16 CITIZEN 2) DIP Switch 2 No. Function ON OFF Factory Setting DS2-1 Bit length 8 bits 7 bits ON DS2-2 Parity No Yes ON DS2-3 Odd/Even Odd Even ON DS2-4 Communication mode DTR/DSR XON/XOFF ON DS2-5 Baud rate ON DS2-6 ″ ON DS2-7 ″ See the table below OFF DS2-8 Unused − − OFF Bau...
Page 32 - MODE SETTING METHOD
iDP3410 User's Manual 18 CITIZEN 7. MODE SETTING METHOD This printer has the CBM, STAR, and ESC/POS mode. Any desired mode can be selected and setaccording to your need. (1) Setting method • See 5. DIP SWITCH SETTING. • Seeing the settings of the DIP switch 1-9 and 1-10 and those of the preset jumpe...
Page 33 - INPUT BUFFER BACKUP FUNCTION; ON; Input Buffer Backup
iDP3410 User's Manual 19 CITIZEN 8. INPUT BUFFER BACKUP FUNCTION 8.1 Buffer Size With the DIP switch, you can set either 6K bytes or 256 bytes.DIP switch 1-8 ON → 6K bytes OFF → 256 bytes 8.2 Input Buffer Backup Even if the power is turned off or fails during the printing process, the data in the in...
Page 34 - PARALLEL INTERFACE
iDP3410 User's Manual 20 CITIZEN 9. PARALLEL INTERFACE 9.1 Specifications • Data input system : 8-bit parallel system (DATA1 to DATA8) • Control signals : ACK, BUSY, STB, FAULT, SELECT, RESET, COMPULSION • Applicable connectors : Printer side --- 57LE-40360 (Equivalent to anphenol), Cable side --- 5...
Page 35 - Input and Output Signals
iDP3410 User's Manual 21 CITIZEN 9.3 Input and Output Signals 9.3.1 Input and Output Signals (1) Input signals to the printer • DATA : An 8-bit parallel signal. (Positive logic) • STB : A strobe signal to read the 8-bit data. (Negative logic) • RESET : A signal to reset the printer from the outside....
Page 38 - SERIAL INTERFACE
iDP3410 User's Manual 24 CITIZEN 10. SERIAL INTERFACE 10.1 Specifications (1) Synchronous system: Asynchronous (2) Baud rate: 150, 300, 600, 1,200, 2,400, 4,800, 9,600, or 19,200 bps (User selectable) (3) Configuration of one word • Start bit : 1 bit • Data bits : 7 or 8 bits (User selectable) • Par...
Page 39 - Cautions
iDP3410 User's Manual 25 CITIZEN 10.2 Connector's Pin Configuration Mode No. CBM STAR ECS/POS 1 FG ← ← 2 TXD ← ← 3 RXD ← ← 4 RTS ← 56 DSR 7 GND ← ← 89 1011 PE (HI-LEVEL) RCH 12 FAULT 13 GND 14 FAULT 15 mTXD 16 mRXD 17181920 DTR ← ← 212223 RESET 2425 Cautions : 1. An RS-232C signal is based on the EI...
Page 40 - Input and Output Signals; This signal is turned to Space when the printer is turned on.
iDP3410 User's Manual 26 CITIZEN 10.3 Input and Output Signals 10.3.1 Input and Output Signals (1) RXD This is a serial received data signal. When a framing error, overrun error, or parity error occurs, thatdata is printed as "?". (2) DTR When this signal is Ready, write the data or a comman...
Page 44 - A signal to reset the entire printer.
iDP3410 User's Manual 30 CITIZEN 10.3.6 Electrical Characteristics (1) RS-232C circuit Input (RXD, DSR, mRXD) [Printer Side] [Host Side] Output (DTR, TXD, mTXD, RCH, RTS, FAULT) Equivalent to MAX232 DTR Mark=(-8V): At Busy TXD Mark=(-8V): 1 Space=(+8V): At Ready Space=(+8V): 0 (2) Others • RESET : A...
Page 46 - Specifications of Power Supply Connector; Connector’s Pin Configuration
iDP3410 User's Manual 32 CITIZEN 11.4 Specifications of Power Supply Connector This is a power connector from an exclusive AC adapter. Connector’s Pin Configuration No. Function 12 +24V GND 1 2 Jack used : HEC0470-01-640(HOSHIDEN) or equivalent Applicable plug : JXP series Type-A (I.D. 2.45 mm, O.D....
Page 47 - MAINTENANCE AND SERVICE
iDP3410 User's Manual 33 CITIZEN 12. MAINTENANCE AND SERVICE For the information on maintenance and service, please contact our dealer or at the following address. Northern America Other Areas CBM America Corporation Japan CBM Corporation Service Center Information Systems Division 363 Van Ness Way ...
Page 48 - PRINT CONTROL FUNCTIONS
iDP3410 User's Manual 34 CITIZEN 13. PRINT CONTROL FUNCTIONS 13.1 CBM Mode 13.1.1 Command List Command Function Code Page 1 FF n n-line paper feed 0CH n 36 2 SO Specifying the double width character 0EH 36 3 SI Canceling the double width character 0FH 37 4 LF Printing and paper feed 0AH 37 5 CR Prin...
Page 49 - XXXX; ALL; Command name
iDP3410 User's Manual 35 CITIZEN 13.1.2 Description of Items XXXX ALL [Function] Command name [Code] A row of command constituent code is represented by a hexadecimal number with < >H,binary number with < >B, and a decimal number with < >. [ ]k means a repeat count of k-times. [Ran...
Page 50 - Details; FF n; Specifying the double width character
iDP3410 User's Manual 36 CITIZEN Details FF n [Function] n-line paper feed [Code] <0C>H n [Range] 1 ≤ n ≤ 127 [Outline] This command feeds the paper by n-lines. You can set n = 1 to 127 lines. If the printbuffer contains the data, use of this command feeds the paper by n-lines after printing t...
Page 52 - CAN; Canceling the print data
iDP3410 User's Manual 38 CITIZEN DC3 [Function] Specifying the red print [Code] <13>H [Outline] This command specifies red-color characters. All the characters in one line are printed inred by prefixing the print data with this command and sending it to the printer. When youwant to use red cha...
Page 57 - BEL; Driving command A for drawer-1
iDP3410 User's Manual 43 CITIZEN ESC BEL n1 n2 [Function] Setting the external device drive pulse width [Code] <1B>H <07>H n1 n2 [Range] 1 ≤ n1 ≤ 127 1 ≤ n2 ≤ 127 [Outline] This command sets the power-on time to drive an external device (Cash drawer).Power-on time = n1 × 10 (ms) Delay ti...
Page 58 - FS; Driving command B drawer-1; SUB; Driving command for drawer-2; RS; This command emits a short warning sound from the printer.
iDP3410 User's Manual 44 CITIZEN FS [Function] Driving command B drawer-1 [Code] <1C>H [Outline] This command drives the drawer connector No. 2 pin under the condition set with the<ESC><BEL> n1 n2 command. SUB [Function] Driving command for drawer-2 [Code] <1A>H [Outline] As ...
Page 62 - ESC DC3 n; Printing the message
iDP3410 User's Manual 48 CITIZEN ESC DC3 n [Function] Printing the message [Code] <1B>H <13>H n [Range] 1 ≤ n ≤ 10 [Function] This command prints a message. If the value of n is specified beyond the range, themessage will not be printed.
Page 68 - ESC “R” n
iDP3410 User's Manual 54 CITIZEN Details ESC “R” n [Function] Selecting the international character set [Code] <1B>H <52>H n [Range] 0 ≤ n ≤ 10 [Outline] This command selects the international characters according to the value of n. n Character Set n Character Set 0 U.S.A. 6 Italy 1 Fran...
Page 72 - LF; Printing and paper feed; CR; Printing
iDP3410 User's Manual 58 CITIZEN LF [Function] Printing and paper feed [Code] <0A>H [Outline] If the print buffer contains the data, this command will feed the line after printing. If not,the command only feeds the line. CR [Function] Printing [Code] <0D>H [Outline] This command prints t...
Page 73 - FF; Setting the n-line page length
iDP3410 User's Manual 59 CITIZEN ESC "a" n [Function] Setting the n-line paper feed [Code] <1B>H <61>H n [Range] 1 ≤ n ≤ 127 [Outline] This command feeds the paper by the number of lines specified with n. You can set n = 1to 127 lines. If the print buffer contains the data, use o...
Page 74 - VT; Vertical tab
iDP3410 User's Manual 60 CITIZEN ESC "C" <0> n [Function] Setting the n-inch page length [Code] <1B>H <43>H <0> n [Range] 1 ≤ n ≤ 127 [Outline] This command sets the length of one page to n-inches. [Default] n = 42 VT [Function] Vertical tab [Code] <0B> H [Outli...
Page 77 - HT; Horizontal tab
iDP3410 User's Manual 63 CITIZEN HT [Function] Horizontal tab [Code] <09>H [Outline] This command moves a printing position to the preset next horizontal tab position. Thiscommand will be ignored unless there is the next horizontal tab position.
Page 85 - Driving command A for drawing-1
iDP3410 User's Manual 71 CITIZEN ESC BEL n1 n2 [Function] Setting the external device drive pulse width [Code] <1B>H <07>H n1 n2 [Range] 1 ≤ n1 ≤ 127 1 ≤ n2 ≤ 127 [Outline] This command sets the power-on time to drive an external device(Cash drawer).Power-on time = n1 × 10 (ms) Delay tim...
Page 86 - Driving command B for drawer-1
iDP3410 User's Manual 72 CITIZEN FS [Function] Driving command B for drawer-1 [Code] <1C>H [Outline] This command drives the drawer connector no. 2 pin under the condition set with the<ESC><BEL> n1 n2 command. SUB [Function] Driving command for drawer-2 [Code] <1A>H [Outline]...
Page 89 - ENQ; Enquiry
iDP3410 User's Manual 75 CITIZEN ENQ [Function] Enquiry [Code] <05>H [Outline] This command is valid only for the serial interface. The printer sends the statusinformation. If this command is entered after receiving the text information in the STX-ETX mode, the printer will send the status inf...
Page 90 - STX; Text start; ETX; Text end
iDP3410 User's Manual 76 CITIZEN STX [Function] Text start [Code] <02>H [Outline] This command is valid only for the serial interface. It effectuates the STX-ETX mode. ETX [Function] Text end [Code] <03>H [Outline] This command is valid only for the serial interface. It ends the STX-ETX ...
Page 95 - and that of vertical dots is represented
iDP3410 User's Manual 81 CITIZEN GS "*" n1 n2 [d] n1 × n2 × 8 [Function] Defining the download, bit image [Code] <1D>H <2A>H <n1> <n2> [<d>] n1 × n2 × 8 [Range] 1 ≤ n1 ≤ 45 0 ≤ n2 ≤ 24 Note ) Take care that the number of data(n1 × n2 × 8) is equal to or smaller ...
Page 118 - CHARACTER CODES TABLE
iDP3410 User's Manual 104 CITIZEN 14. CHARACTER CODES TABLE 14.1 CBM (Domestic)
Page 132 - International Character Codes Table
iDP3410 User's Manual 118 CITIZEN 14.15 International Character Codes Table
Page 133 - APPENDIX 1. BLOCK DIAGRAM
iDP3410 User's Manual 119 CITIZEN APPENDIX 1. BLOCK DIAGRAM ROM RAM OSC16MHz POWER LED ERROR LED FEED Switch Drawer Parallel (CENTRONICS Based) Serial (RS-232C Based) AC Adapter 34 AD Series (26V DC, 1.15A) DIP Switch Driver Interface Reset Driver Driver Filter Power Supply Vp Vcc Print Head Paper E...
Page 134 - APPENDIX 2. OUTLINE DRAWING
iDP3410 User's Manual 120 CITIZEN APPENDIX 2. OUTLINE DRAWING
Page 137 - ZU BEACHTENDE SICHERHEITSMASSREGELN; WARNUNG; Dieses Symbol ruft den Bediener zu erhöhter Wachsamkeit auf.
iDP3410 User's Manual 123 CITIZEN ZU BEACHTENDE SICHERHEITSMASSREGELN Zur Vermeidung von Gefahren gegenüber dem Bediener und anderen Personen und Sachschäden sind diefolgenden Vorsichtsmaßregeln unbedingt zu beachten. Der folgende Text beschreibt das Ausmaß der Gefahren und potentiellen Sachschäden,...
Page 138 - kann zu Bränden und elektrischen Schlägen führen.
iDP3410 User's Manual 124 CITIZEN WARNUNG Beim Betrieb des Geräts sind die nachfolgenden Vorsichtsmaßregeln unbedingt zu beachten. EineMißachtung dieser Hinweise kann zu Schäden, Funktionsstörungen, Rauchentwicklung und Brandgefahrdurch Überhitzen und zu elektrischen Schlägen führen.Der fortgesetzte...
Page 139 - VORSICHTSMASSREGELN FÜR DIE AUFSTELLUNG
iDP3410 User's Manual 125 CITIZEN VORSICHTSMASSREGELN FÜR DIE AUFSTELLUNG • Das Gerät nicht an Plätzen abstellen oder betreiben, an denen es Feuer, Feuchtigkeit oder direkterSonnenbestrahlung ausgesetzt ist. Ebenso sind Plätze in der Nähe von Heizkörpern und sonstigenWärmenquellen zu vermeiden, an d...
Page 140 - VORSICHTSMASSREGELN FÜR DIE HANDHABUNG; Zur Vermeidung von Verletzungen und Schäden
iDP3410 User's Manual 126 CITIZEN VORSICHTSMASSREGELN FÜR DIE HANDHABUNG Zur Vermeidung von Problemen sind bei der Handhabung des Geräts die folgenden Vorsichtsmaßregelnzu beachten. • Für die Stromversorgung ausschließlich das vorgeschriebene Netzteil verwenden. • Den Druckbetrieb nicht ohne eingele...
Page 141 - TÄGLICHE WARTUNG; Vor der Wartung zuerst den Drucker ausschalten.
iDP3410 User's Manual 127 CITIZEN TÄGLICHE WARTUNG • Vor der Wartung zuerst den Drucker ausschalten. • Schmutz und Staub mit einem trockenen, weichen Tuch vom Druckergehäuse abwischen. Bei starkerVerschmutzung einen Lappen in Wasser anfeuchten, auswringen und damit abwischen. Hierzuniemals flüchtige...
Page 142 - Anschluß des Netzteils; Ausschließlich das vorgeschriebene Netzteil verwenden.
iDP3410 User's Manual 128 CITIZEN 4. BETRIEB 4.1 Anschluß des Netzteils 1. Den Netzschalter drücken.2. Den Kabelstecker des Netzteils an die Netzanschlußbuchse an der Rückwand des Druckers anschließen.3. Um Anschlußunterbrechungen vorzubeugen, den Kabelstecker, wie in der untenstehenden Abbildung ge...
Page 143 - Anschluß des Schnittstellenkabels
iDP3410 User's Manual 129 CITIZEN 4.2 Anschluß des Schnittstellenkabels 1. Den Drucker (einschließlich angeschlossene Geräte) ausschalten.2. Den Kabelstecker korrekt ausgerichtet (Ober- und Unterseite prüfen) an die Schnittstellenbuchse anschließen.3. Die Kabelstecker befestigen: • Seriellschnittste...
Page 144 - Einsetzen der Farbbandkassette; Kassette straff zu wickeln.
iDP3410 User's Manual 130 CITIZEN 4.4 Einsetzen der Farbbandkassette 1. Die Druckerabdeckung aufklappen.2. Bei schlaffem Farbband den Knopf in Pfeilrichtung drehen, um das Band vor dem Einsetzen der Kassette straff zu wickeln. 3. Die Farbbandkassette zwischen Druckkopfabdeckung und Walze einsetzen u...
Page 146 - VORSICHT
iDP3410 User's Manual 132 CITIZEN VORSICHT : • Schlaffes Druckpapier durch Zurückdrehen der Papierrolle straffen. • Bei schräg eingesetztem Druckpapier den Papier-Freigabehebels drücken und dasPapier gerade richten. • Die Druckerabdeckung niemals während des Druckens öffnen, da hierdurchPapierstaus ...
Page 147 - Entfernen des restlichen Druckpapiers; Sämtliche Papierreste aus dem Papierweg entfernen.
iDP3410 User's Manual 133 CITIZEN 4.6 Entfernen des restlichen Druckpapiers 1. Die Druckerabdeckung aufklappen.2. Den Papier-Freigabehebel in Pfeilrichtung drücken und das Rollenpapier herausziehen. VORSICHT : Beim Herausziehen des Druckpapiers (in Vorwärts- oder Rückwärtsrichtung) daraufachten, den...
Page 148 - Bedienfeld und Fehleranzeigelämpchen; Leuchtet bei eingeschalteter Netzversorgung.
iDP3410 User's Manual 134 CITIZEN 4.8 Bedienfeld und Fehleranzeigelämpchen 1. Netzanzeigelämpchen (grün) (POWER) Leuchtet bei eingeschalteter Netzversorgung. 2. Fehleranzeigelämpchen (rot) (ERROR) Leuchtet, wenn das Papier aufgebraucht ist oder ein Fehler im Druckmechanismus oder in derKommunikation...
Page 149 - Betriebsfluß beim Einschalten
iDP3410 User's Manual 135 CITIZEN 4.9 Betriebsfluß beim Einschalten "Pufferdaten löschen" Ja (FEED SW) und vergrößerter Rot-Druck Feed SW ? Pufferdaten FEED SW ? (FORTSETZEN) 1 Sek. vergangen Einschalten JA NEIN Druckt "=Hexadecimal Dum=" Datenausgabe-Modus Testdruck NO YES OFF ON FE...
Page 152 - Hinweis
iDP3410 User's Manual 138 CITIZEN 2) DIP-Schalter 2 No. Funktion ON OFF Werksseitige Einstellung DS2-1 Bitlänge 8 Bit 7 Bit ON DS2-2 Parität Nein Ja ON DS2-3 Ungerade/Gerade Ungerade Gerade ON DS2-4 Kommunikationsmodus DTR/DSR XON/XOFF ON DS2-5 Baudrate ON DS2-6 ″ ON DS2-7 ″ Siehe Tabelle unten OFF ...
Page 153 - EINSTELLUNG DER VORWAHL-JUMPERSTECKER
iDP3410 User's Manual 139 CITIZEN 6. EINSTELLUNG DER VORWAHL-JUMPERSTECKER 6.1 Lage der Vorwahl-Jumperstecker (1) Betriebsstrom ausschalten.(2) Ein Kassettenband entfernen.(3) Die Oberabdeckung entfernen. Der Vorwahl-Jumperstecker liegt, wie in der Abbildung unten gezeigt. Serielle Schnittstelle Par...
Page 154 - METHODE FÜR MODUSEINSTELLUNG
iDP3410 User's Manual 140 CITIZEN 7. METHODE FÜR MODUSEINSTELLUNG Dieser Drucker hat die Modi CBM, STAR und ESC/POS. Jeder gewünschte Modus kann gewählt und nachBedarf eingestellt werden. (1) Einstellmethode • Siehe 5. DIP-SCHALTER-EINSTELLUNG • Unter bezug auf die Einstellungen der DIP-Schalter-Seg...
Page 155 - WARTUNG UND DIENST
iDP3410 User's Manual 141 CITIZEN 12. WARTUNG UND DIENST Bitte wenden Sie sich an die folgenden Stellen für weitergehende Informationen. Nordamerika Andere Gebiete CBM America Corporation Japan CBM Corporation Service Center Information Systems Division 363 Van Ness Way CBM Bldg., 5-68-10, Nakano Su...
