Epson Epson Stylus NX530- User Manual

4 The LCD screen 5 The + and – buttons (increase or decrease the number of copies) 6 The Stop/Clear Settings button 7 The WiFi light 8 The Home button 9 The Help button 10 The Menu button 11 The arrow buttons and the OK button 12 The Back button 13 The Start button Parent topic: Setting Up the Contr...

Parent topic: Setting Up the Control Panel Changing LCD Screen Language You can change the language used on the LCD screen. 1. Press the Home button, if necessary. 2. Press the arrow buttons to select Setup and press the OK button. 3. Press the arrow buttons to select Printer Setup and press the OK ...

Product Parts - Front 1 Output tray 2 Output tray extension 3 Paper stopper 4 Paper cassette 5 Edge guides Parent topic: Product Parts Locations 16

Product Parts - Inside 1 Scanner unit 2 Ink cartridge holder Parent topic: Product Parts Locations 17

Product Parts - Back 1 Auto duplexer 2 AC inlet 3 LAN port 4 USB port Parent topic: Product Parts Locations Selecting Wireless Network Settings From the Control Panel You can select or change wireless network settings using your product control panel. To install your product on a wireless network, f...

Note: If the WiFi light is off, you may have selected the wrong network name or entered the password incorrectly. Repeat these steps to try again. Parent topic: Product Basics Wireless Printing from a Mobile Device You can print photos, documents, web pages, and more from smartphones or tablets, suc...

Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper for DocumentsLoading Paper for PhotosLoading EnvelopesPaper Loading CapacityAvailable Epson PapersBorderless Paper Type CompatibilityPaper or Media Type Settings Loading Paper for Documents You can print d...

4. Slide the edge guide shown below to your paper size. 24

Note: If you are using legal-size or longer paper, do not open the paper stopper. Do not remove or insert the paper cassette during printing. Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document f...

Always follow these paper loading guidelines: • Load only the recommended number of sheets. • Load paper short edge first, no matter which way your document faces. • Do not load paper above the arrow mark inside the edge guide. • Check the paper package for any additional loading instructions. Paren...

4. Slide the edge guide shown below to your envelope size. 5. Load envelopes, printable side down, against the edge guide as shown. Note: Make sure the envelopes are loaded against the edge guide and not sticking out from the end of the cassette. 35

Always follow these paper loading guidelines: • If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time. • If print quality declines when printing multiple envelopes, try loading one envelope at a time. • Do not load envelopes that ...

Paper type Loading capacity 1 sheet EPSON Photo Quality Self-adhesive Sheets EPSON Iron-on Cool Peel Transfer paper Envelopes 10 envelopes * Based on 20-lb (75 g/m 2 ) paper weight. Do not load paper above the arrow mark inside the edge guide. ** For one-sided printing or two-sided printing with the...

Parent topic: Loading Paper Borderless Paper Type Compatibility You can print borderless photos on compatible paper types in compatible sizes: Borderless Paper Types • EPSON Brochure & Flyer Paper Matte Double-sided • EPSON Ultra Premium Presentation Paper Matte • EPSON Premium Presentation Pape...

For this paper Select this paper Type or Media Type setting EPSON Ultra Premium Photo Paper Glossy Ultra Premium Photo Paper Glossy EPSON Premium Photo Paper Glossy Premium Photo Paper Glossy EPSON Photo Paper Glossy Photo Paper Glossy EPSON Premium Photo Paper Semi-gloss Premium Photo Paper Semi-Gl...

Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner Glass Placing Originals on the S...

3. Close the document cover gently to keep your original in place. Parent topic: Placing Originals on the Product Related topics CopyingScanning 44

Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying DocumentsCopying PhotosPaper Type Settings - CopyingPaper Size Settings - CopyingCopying Options Copying Documents You can copy documents onto pla...

5. To print more than one copy, press the + or – buttons to select the number (up to 99). 6. If you need to adjust the darkness of your copy, press the left or right arrow buttons to change the Density setting. 7. To change any of the print settings displayed on the LCD screen, press the Menu button...

Related topics Loading PaperPlacing Originals on the Product Paper Type Settings - Copying Select a Paper Type setting that matches the paper you loaded. Paper type loaded Paper Type setting Plain paper Plain Paper EPSON Bright White Paper EPSON Presentation Paper Matte EPSON Photo Quality Self-adhe...

• 8 × 10 inches (203 × 254 mm) • Letter (8.5 × 11 inches [216 × 279 mm]) • A4 (8.3 × 11.7 inches [210 × 297 mm]) Parent topic: Copying Copying Options Select the Paper and Copy Settings you want to use for your copies. Note: Not all options or settings may be available, depending on other copying se...

Printing From a Computer Before printing documents or photos from your computer, make sure you have set up your product andinstalled its software as described on the Start Here sheet. Note: It is a good idea to check for updates to your product software on Epson's support website. Printing with Wind...

Related tasks Printing Your Document or Photo - WindowsSelecting Double-sided Printing Settings - Windows Print Quality Options - Windows You can select any of the available Quality options to fine-tune the quality of your print. Some settingsmay be unavailable, depending on the paper type and borde...

4. Select the double-sided printing options you want to use. 5. Click OK to return to the Main tab. 6. Click the Print Density button. You see this window: 57

Print Density Adjustments - Windows When you select the User-Defined setting, you can select any of the available options on the Print Density Adjustment window to adjust the print quality of your double-sided print job. Print Density Sets the level of ink coverage for double-sided printing. Increas...

Parent topic: Selecting Additional Layout and Print Options - Windows Additional Settings Options - Windows You can select any of the Additional Settings options to customize your print. Some options may be pre-selected or unavailable, depending on other settings you have chosen. Rotate 180º Prints ...

2. Place your cursor over a Printing Presets option to view its list of settings. 3. Use any of the available options on the screen to control your printing presets. 4. To choose an option for printing, select it. 5. Click OK . Parent topic: Printing with Windows Printing Your Document or Photo - Wi...

2. Click OK or Print to start printing. Parent topic: Printing with Windows Selecting Default Print Settings - Windows When you change your print settings in a program, the changes apply only while you are printing in thatprogram session. If you want to change the print settings you use in all your ...

3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK . These settings are now the defaults selected for printing. You can still change them as needed forprinting in any program session. Changing the Language of the Printer Software Screens Parent topic: ...

You see the maintenance options: 4. Select the language you want to use as the Language setting. 5. Click OK to close the printer software window. The printer software screens appear in the language you selected the next time you access them. Parent topic: Selecting Default Print Settings - Windows ...

3. Do one of the following for each type of update: • To change how often the software checks for updates, select a setting in the Check every menu. • To disable the automatic update feature, select the Never option. 4. Click Apply . 5. Click OK to exit. Note: If you choose to disable the automatic ...

7. Select any application-specific settings that appear on the screen, such as those shown in the imageabove for the Preview application. 8. Select Print Settings from the pop-up menu. You see these settings: 70

Parent topic: Printing with Mac OS X 10.5, 10.6, or 10.7 Selecting Double-sided Printing Settings - Mac OS X 10.5/10.6/10.7 You can print on both sides of the paper by selecting Two-sided Printing Settings or Output Settings from the pop-up menu on the print window. Note: Some options may be pre-sel...

2. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 3. If necessary, customize the Adjustments settings as instructed on the screen. 4. Print a test copy of your double-sided document to test th...

4. Select any of the available printing preferences. 5. Click OK . Printing Preferences - Mac OS X 10.5/10.6/10.7 Parent topic: Printing with Mac OS X 10.5, 10.6, or 10.7 Printing Preferences - Mac OS X 10.5/10.6/10.7 You can select from these settings on the Driver tab. Skip Blank Page Ensures that...

Selecting Page Setup Settings - Mac OS X 10.4Selecting Basic Print Settings - Mac OS X 10.4Selecting Print Layout Options - Mac OS X 10.4Selecting Double-sided Printing Settings - Mac OS X 10.4Managing Color - Mac OS X 10.4Selecting Printing Preferences - Mac OS X 10.4Printing Your Document or Photo...

4. Select the size of the paper you loaded as the Paper Size setting. If you are printing a borderless photo, select a paper size with a Borderless option. You can also select a custom setting to create a custom paper size. Note: You must select a compatible borderless paper type and size to print b...

2. Select your product as the Printer setting. 3. Select the Copies and Pages settings as necessary. Note: If you do not see these settings in the print window, check for them in your application before printing. 4. Select Print Settings from the pop-up menu. 83

Print Options - Mac OS X 10.4 You can select any of the print options to customize your print. Some options may be unavailable,depending on other settings you have chosen. Expansion If you selected a borderless paper size setting, adjusts the image expansion settings to controlprinting at the edges ...

1. Select Color Options from the pop-up menu in the print window. 2. Select one of the available options. Color Options - Mac OS X 10.4 Parent topic: Printing with Mac OS X 10.4 Color Options - Mac OS X 10.4 You can select from these settings on the Color Options menu. Manual Settings Lets you selec...

1. Select Extension Settings from the pop-up menu in the print window. 2. Select any of the available printing preferences. Printing Preferences - Mac OS X 10.4 Parent topic: Printing with Mac OS X 10.4 Printing Preferences - Mac OS X 10.4 You can select from these options on the Extension Settings ...

2. Select the following options as necessary: • To cancel printing, click the print job and click Delete . • To pause printing, click the print job and click Hold . To resume printing, click the print job marked "Hold" and click Resume . • To check ink status, click Supply Levels . Parent to...

Scanning You can scan original documents or photos and save them as digital files on your computer. Starting a ScanSelecting EPSON Scan SettingsScanning with Mac OS X 10.6/10.7Scanning to a PDF FileRestoring Photo Colors as You Scan Starting a Scan After placing your original documents or photos in ...

4. Press the arrow buttons to select a scan option and press the OK button. • Scan to PC saves your scan as a JPEG file to your computer or as an image capture in Mac OS X 10.6/10.7. • Scan to PC (PDF) saves your scan as a PDF file to your computer or as an image capture in Mac OS X 10.6/10.7. • Sca...

Changing Default Scan Button Settings You can view or change the default scan settings your product uses when you scan using the productbuttons. You do this using the Event Manager program. Note: You cannot change default scan button settings with Mac OS X 10.6/10.7. 1. Do one of the following to op...

Parent topic: Starting a Scan Related tasks Scanning with Mac OS X 10.6/10.7 Related topics Selecting EPSON Scan Settings 95

Starting a Scan from a Scanning Program You can start EPSON Scan from a scanning program to select scan settings, scan, and open thescanned image in the program. Note: You cannot use EPSON Scan with Mac OS X 10.6/10.7. 1. Open your scanning program and select its scanning option. (See your scanning ...

Selecting EPSON Scan Settings After starting EPSON Scan, you can select settings in various modes to customize your scan. Scan ModesSelecting the Scan ModeScanning in Full Auto ModeScanning in Home ModeScanning in Office ModeScanning in Professional ModeImage Preview GuidelinesScan Resolution Guidel...

Parent topic: Selecting EPSON Scan Settings Related tasks Scanning in Full Auto ModeScanning in Home ModeScanning in Office ModeScanning in Professional Mode Scanning in Full Auto Mode When you scan in Full Auto Mode, EPSON Scan automatically saves your scanned file in JPEG formatin your operating s...

2. To select image adjustment options or change your scanned file settings, click Customize , select the settings, and click OK . • To choose any of the available image adjustment options, select the checkbox for the option. • To change the scanned file settings, click File Save Settings . 3. Click ...

Available Image Adjustments - Full Auto Mode You can select these image adjustment options in EPSON Scan Full Auto Mode. Dust Removal Removes dust marks from your originals automatically. Color Restoration Restores the colors in faded photos automatically. Auto Photo Orientation Checks the preview i...

2. Select the Document Type setting that matches your original, such as Photograph or Text/Line Art . 3. Select the Image Type setting that matches your original. 103

Selecting a Scan Area - Home Mode You can select a specific area in your preview image to include in your scanned image. You can selectthe entire image area or a portion of it. You can even select multiple scan areas to create multiplescanned images of different areas (Normal Preview mode only). You...

• Normal preview : Click the Auto Locate icon to create a marquee (dotted line) on the preview image. 106

2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marq...

4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save , and click OK . Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size. Parent ...

EPSON Scan previews your original and displays the result in a separate Preview window. 7. If desired, select the area in your preview image that you want to scan (scanned image area). 8. Select any of the image adjustment settings you want to use. Before making adjustments, click theimage or scanne...

• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • To create additional marquees (up to 50), click the Copy Marquee ...

Text Enhancement Sharpens the appearance of letters in text documents. Auto Area Segmentation Makes grayscale images clearer and text recognition more accurate by separating the text from thegraphics. Threshold Adjusts the level at which black areas in text and line art are delineated, improving tex...

• Normal preview : To create additional marquees (up to 50), click the Copy Marquee icon to copy the existing marquee and paste it on the preview image. • To delete a marquee, click the marquee, then click the Delete Marquee icon. 3. Click inside the scan area and make any necessary settings in the ...

Selecting a Scan Size - Professional Mode You can reduce or enlarge the size of your image as you scan. You can also select a specific scan size,such as a common photo size like 4 × 6 inches (102 × 152 mm). This places a scan area of that size onthe preview image so you can use it to help crop the i...

• Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint. Parent topic: Scanning in Professional Mode Image Preview Guidelines You can preview your scanned image so you can adjust the scan settings using the preview as a guide.There are tw...

Parent topic: Selecting EPSON Scan Settings Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. Youcan also select various optional settings that control how EPSON Scan behaves when you scan andsave files. The File Save Setti...

5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan . Your scanned file is saved in the folder you selected. Available Scan Settings - Mac OS X 10.6/10.7 Parent topic: Scanning Available Scan Settings - Mac OS X 10.6/10.7 You can select these sc...

You see the File Save Settings window. 7. Select PDF as the Type setting. 8. Select any other settings you want to use on the File Save Settings window. 9. Click OK . EPSON Scan scans your document and you see this window: 133

Restoring Photo Colors as You Scan You can restore the colors in faded photos as you scan them using EPSON Scan's Color Restorationsetting. You can select this setting in any of the available scan modes. 1. Place your original on your product for scanning. 2. Start EPSON Scan. 3. Select the scan mod...

Using Memory Cards With Your Product Follow the instructions here to work with a memory card inserted into your product. Inserting a Memory CardPrinting from a Memory CardTransferring Photos on a Memory CardPrinting Pre-Selected Photos From a Memory Card Inserting a Memory Card Insert only one memor...

Note: Do not force the card all the way into the slot. Insert it only until it meets resistance. The memory card access light flashes and then stays lit. Caution: Do not remove a memory card or turn off your product while the memory card access light is flashing or you may lose data from the memory ...

• miniSDHC* • miniSD* • microSDHC* • microSD* • xD-Picture Card • xD-Picture Card Type M • xD-Picture Card Type M+ • xD-Picture Card Type H Parent topic: Inserting a Memory Card Memory Card File Specifications You can insert memory cards in your product containing files that meet these specification...

1. Make sure the memory card access light is not flashing. 2. If your product is connected to your computer using a USB cable, do one of the following: • Windows : Open the My Computer , Computer , or Windows Explorer utility. Then right-click the name of your memory card (listed as a removable disk...

Print settings Available options Description Paper Type Various paper types Indicates the type of paper you haveloaded; see the list of paper types forcopying (available options depend on theselected Paper Size setting) Borderless On Expands the image to the edge of thepaper (slight cropping may occ...

Printing Photo Proofsheets You can print a proof sheet containing small versions of all the photos on your memory card or otherdevice. 1. Press the Home button, if necessary. 2. Press the arrow buttons to select Print Photos and press the OK button. 3. Press the arrow buttons to select Print Proof S...

Transferring Photos from a Memory Card to Your Computer Parent topic: Using Memory Cards With Your Product Setting Up File Sharing for Photo Transfers From Your Computer Before you transfer photos from a computer to a memory card inserted into your product's memory cardslots, you may need to set up ...

• Mac OS X 10.4 with a network connection : Select the hard drive icon on your desktop, select Network in the sidebar, then select your product (it may be located within a folder with your network's name) and click OK . Select the MEMORYCARD icon on your desktop. 4. Select the folder that contains y...

8. When you are ready to print, press the Start button. Note: To cancel printing, press the Stop/Clear Settings button. Parent topic: Using Memory Cards With Your Product Related references Print Setting Options - Photo Mode 156

Replacing Ink Cartridges When an ink cartridge is expended, you need to replace it. You may also need to replace a cartridge that is more than six months old, if your printouts do not looktheir best, even after cleaning and aligning the print head. Note: Please dispose of your used Epson branded ink...

Note: The display is different depending on which ink cartridges are low or expended, if any. Displayed ink levels are approximate. 4. Press the OK button to exit. Parent topic: Check Cartridge Status Related tasks Removing and Installing Ink Cartridges Checking Cartridge Status with Windows A low i...

2. Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Note: If any of the cartridges installed in the product is broken, incompatible with the product model...

4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox. Parent topic: Check Cartridge Status Related tasks Removing and Installing Ink Cartridges 160

Checking Cartridge Status with Mac OS X You can check the status of your ink cartridges using a utility on your Mac. 1. Do one of the following: • Mac OS X 10.6/10.7 : In the Apple menu or the Dock, select System Preferences . Select Print & Fax or Print & Scan , select your product, and sel...

3. Do the following as necessary: • You can update the ink cartridge status by clicking Update . • Replace or reinstall any ink cartridge indicated on the screen. Note: Depending on the color of the expended cartridge and how you are printing, you may be able to continue printing temporarily. Note: ...

3. Open the cartridge cover. 4. Squeeze the tab on the cartridge and lift the cartridge straight up to remove it. Note: Dispose of used cartridges carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your skin, wash it thoroughly with soap and water. If ink ge...

10. Lower the scanner unit. The print head moves to its home position and the printer starts charging the ink. This takes about2.5 minutes. When you see a confirmation message on the screen, ink charging is finished. Caution: Never turn off the product while the On light is flashing or you will wast...

Note: You cannot print with expended color ink cartridges using your product's control panel. Printing With Expended Color Cartridges - WindowsPrinting With Expended Color Cartridges - Mac OS X 10.5/10.6/10.7 Parent topic: Replacing Ink Cartridges Printing With Expended Color Cartridges - Windows If...

2. If you see a message telling you that you can temporarily print with only black ink, click the Delete icon to cancel your print job. Note: If the message screen appears on another computer on a network, you may need to cancel the print job using the product control panel. 3. Do one of the followi...

Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges. Print Head MaintenancePrint Head AlignmentCleaning the Paper Path Print Head Main...

4. Click Print . 5. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 176

6. If there are no gaps, click Finish . If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check Related concepts Print Head Cleaning Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean ...

4. Select the cleaning cycle you want to run, based on the nozzle check pattern. 5. Click Start to begin the cleaning cycle. The On light flashes throughout the cleaning cycle and stays on when the cleaning cycle is finished. Caution: Never turn off the product during a cleaning cycle or you may dam...

Print head needs cleaning • If there are no gaps, click Finish . • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product turned onand wait at least 6 hours. Then try cleani...

Aligning the Print Head Using the Product Control Panel You can align the print head using the control panel on your product. 1. Make sure plain paper is loaded in the product. 2. Press the Home button, if necessary. 3. Press the arrow buttons to select Setup and press the OK button. 4. Press the ar...

6. Press the Start button to print an alignment sheet. Note: Do not cancel printing while you are printing a head alignment pattern. You see this screen: 7. Check the printed pattern and press the arrow buttons to choose the number representing the bestprinted pattern for each set. Press the OK butt...

Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows computer or Mac. 1. Load a few sheets of plain paper in the product. 2. Do one of the following: • Windows: Right-click the product icon in the Windows taskbar. • Mac OS X 10.6/10.7 : In the...

5. Check the printed pattern and follow the instructions on the screen to choose the numberrepresenting the best printed pattern for each set. • After choosing each pattern number, click Next . • If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Real...

Cleaning the Paper Path If you see ink on the back of a printout, you can clean the paper path to remove any excess ink. 1. Load a few sheets of plain paper in the product. 2. Use the product control panel to make a copy, but without placing a document on the scanner glass. 3. Check the back of the ...

Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your ProductTransporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Close the output tray when you are not us...

Solving Problems Check these sections for solutions to problems you may have using your product. Checking for Software UpdatesProduct Status MessagesRunning a Product CheckResetting Control Panel DefaultsSolving Setup ProblemsSolving Network ProblemsSolving Copying ProblemsSolving Paper ProblemsSolv...

Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. Youcan also press the Help button to view help topics. LCD screen message Condition/solution Paper jam inside or back Lift up the scanner unit and remove any jammed paper. Detach the...

LCD screen message Condition/solution Recovery Mode The firmware update has failed, and the printer is in recovery mode. VisitEpson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for instructions on repeating the firmware update. Parent topic: Solving Problems Rel...

6. Select Nozzle Check and press the OK button. You see this screen: 7. Press the Start button. After the nozzle pattern prints, you see this screen: 8. Do the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is oper...

settings. Check the other solutions in this book or try uninstalling and reinstalling your printersoftware. • If the page prints but the nozzle check pattern has gaps, clean or align the print head. • If the page does not print, the product may have a problem. Check the other solutions in this manua...

4. Select one of these options and press the OK button: • Reset Network Settings : Resets all network settings. • Reset All except Network Settings : Resets all control panel settings, except for network settings. • Reset All Settings : Resets all control panel settings. You see a confirmation scree...

Software Installation Problems If you have problems while installing your product software, try these solutions: • Make sure your product is turned on and the USB cable or network cable is securely connected at both ends. If you still have problems installing software, disconnect the cable and caref...

Note: Breakdown or repair of this product may cause loss of network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. Werecommend that you make your own backup or print out your network data and settings. Product Cannot Co...

Network Software Cannot Find Product on a Network If EpsonNet Setup cannot find your product on a network, try these solutions: • Make sure your product is turned on and connected to your network. Verify connection using your product control panel. • If necessary, reinstall your product software and...

• Try printing to your product from another computer on the network. • If network printing is slow, print a network status sheet and check the signal strength. If it is poor, place your product closer to your router or access point. Note: Avoid placing your product near a microwave oven, 2.4 GHz cor...

1. Press the Home button, if necessary. 2. Press the arrow buttons to select Setup and press the OK button. 3. Press the arrow buttons to select Network Settings and press the OK button. You see this screen: 4. Select Confirm Network Settings and press the OK button. 5. Press the Start button to pri...

Product Makes Noise, But Nothing Copies If your product makes a noise, but nothing copies, try these solutions: • Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. • If the nozzle check page does not print, but the product's On light is ...

• Do not load more than the recommended number of sheets. • If paper jams when you print on both sides of the paper, try loading fewer sheets. • For best results, follow these guidelines: • Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick. • Load paper in ...

3. Remove any jammed paper. Caution: Do not touch the flat white cable inside the printer. 4. Lower the scanner unit. 5. Press the OK button to resume printing. If you still see a paper jam message, check the other paper jam solutions. Parent topic: Solving Paper Problems 206

Paper Jam Problems in the Paper Cassette If paper has jammed in the paper cassette, try these solutions: 1. Close the output tray. 2. Pull out the paper cassette. 207

6. Press the Start button to resume printing. If you still see a paper jam message, continue with these steps. 7. Turn off the product and unplug it from the electrical outlet. 8. Close the output tray. 9. Pull out the paper cassette. 10. Carefully turn the product over onto the side and remove any ...

11. Place the product back on its base, then replace the paper cassette. 12. Plug the product back into the electrical outlet, then turn it on. Parent topic: Solving Paper Problems Paper Jam Problems in the Auto Duplexer If paper has jammed in the auto duplexer, try these solutions: 1. Cancel the pr...

7. Reattach the duplexer. 8. Press the Start button to resume printing. If you still see a paper jam message, check the other paper jam solutions. Parent topic: Solving Paper Problems Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions: • If paper does not ...

Related topics Loading Paper Solving Problems Printing from a Computer Check these sections if you have problems while printing from your computer. Nothing PrintsProduct Icon Does Not Appear in Windows TaskbarError After Cartridge ReplacementPrinting is Slow Parent topic: Solving Problems Nothing Pr...

Related tasks Running a Product Check Product Icon Does Not Appear in Windows Taskbar If you do not see your product icon in the Windows taskbar, first try restarting your computer. If that doesnot work, try this solution: 1. Do one of the following: • Windows 7 : Click and select Devices and Printe...

Parent topic: Solving Problems Printing from a Computer Related topics Replacing Ink Cartridges Printing is Slow If printing becomes slow, try these solutions: • Make sure your system meets the requirements for your operating system. If you are printing a high- resolution image, you may need more th...

Selecting Basic Print Settings - Mac OS X 10.5/10.6/10.7Selecting Basic Print Settings - Mac OS X 10.4 Solving Page Layout and Content Problems Check these sections if you have problems with the layout or content of your printed pages. Inverted ImageToo Many Copies PrintBlank Pages PrintIncorrect Ma...

Parent topic: Solving Page Layout and Content Problems Related tasks Selecting Basic Print Settings - WindowsSelecting Basic Print Settings - Mac OS X 10.5/10.6/10.7Selecting Basic Print Settings - Mac OS X 10.4 Blank Pages Print If blank pages print unexpectedly, try these solutions: • Make sure yo...

Parent topic: Solving Page Layout and Content Problems Related tasks Selecting Basic Print Settings - WindowsSelecting Basic Print Settings - Mac OS X 10.5/10.6/10.7Selecting Basic Print Settings - Mac OS X 10.4 Related topics Loading Paper Border Appears on Borderless Prints If you see a border on ...

• In Windows, clear any stalled print jobs from the Windows Spooler: • Windows 7 : Click and select Devices and Printers . Right-click your product name, select See what's printing , select your product name again if necessary, right-click the stalled print job, click Cancel , and click Yes . • Wind...

Slanted Printout If your printouts are slanted, try these solutions: • Slide the edge guides against the edges of the paper. • Select a higher print quality setting in your printer software. • Align the print head. Parent topic: Solving Page Layout and Content Problems Related concepts Print Head Al...

• Make sure you loaded the printable side of the paper facedown in the cassette. • Turn off any high speed settings in your product software. • Align the print head. • You may need to replace the ink cartridges. Parent topic: Solving Print Quality Problems Related concepts Print Head CleaningPrint H...

Faint Printout or Printout Has Gaps If your printouts are faint or have gaps, try these solutions: • Clean the print head. • The ink cartridges may be old or low on ink, and you may need to replace them. • Make sure the paper type setting matches the type of paper you loaded. • Make sure your paper ...

• You may need to increase the image resolution or print a smaller size; see your software documentation. Parent topic: Solving Print Quality Problems Related concepts Print Head Alignment Related tasks Selecting Basic Print Settings - WindowsSelecting Additional Layout and Print Options - WindowsSe...

Managing Color - Mac OS X 10.5/10.6/10.7Selecting Basic Print Settings - Mac OS X 10.4Managing Color - Mac OS X 10.4 Related topics Replacing Ink Cartridges Solving Scanning Problems Check these solutions if you have problems scanning with your product. Scanning Software Does Not Operate CorrectlyCa...

• Make sure your computer is not running in a power-saving mode, such as sleep or standby. If so, wake your system and restart EPSON Scan. • Make sure you do not have multiple versions of EPSON Scan installed. If you do, uninstall both versions and install one version. • If you upgraded your operati...

• If you are scanning using the EPSON Scan Black & White setting, adjust the Threshold setting and scan again. Parent topic: Solving Scanned Image Quality Problems Related topics Placing Originals on the Product Line of Dots Appears in All Scanned Images If a line of dots appears in all your sca...

• Adjust the Auto Exposure setting. • Increase the Resolution setting. Parent topic: Solving Scanned Image Quality Problems Related topics Selecting EPSON Scan Settings Image Colors are Patchy at the Edges If you are scanning a thick or warped original, cover its edges with paper to block external l...

• Select a lower Resolution setting. Parent topic: Solving Scanned Image Quality Problems Related topics Selecting EPSON Scan Settings Image is Scanned Upside-Down Your product scans using the Auto Photo Orientation setting. This setting checks the preview image for faces, the sky, and other feature...

Parent topic: Solving Scanned Image Quality Problems Related tasks Selecting a Scan Area - Home ModeSelecting a Scan Area - Professional Mode Scanned Image Edges are Cropped If the edges of a scanned image are cropped, make sure your original is placed correctly for scanning. Ifnecessary, move your ...

• Make sure the files on your memory card are in the correct format. • If you have too many photos on your memory card, you may not see all the photos you expect or may be prompted to select a group of photos by date. Reduce the number of photos on your card or selectone group of photos at a time. C...

Uninstalling Product Software - Windows You can uninstall and then re-install your product software to solve certain problems. 1. Turn off the product. 2. Disconnect any interface cables. 3. Click or Start , and select All Programs or Programs . 4. Select EPSON , select your product, then click EPSO...

1. To download the Uninstall Center utility, visit the Epson download site ( U.S. downloads or Canadian downloads ). 2. Follow the instructions on the screen to install the Uninstall Center. 3. Quit all applications currently running on your Mac. 4. Select the checkbox for each software program you ...

• Canada: (905) 709-3839, 6 AM to 8 PM, Pacific Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges mayapply. Purchase Supplies and Accessories You can purchase genuine Epson ink and paper at EPSON Supplies Central at www.epson.co...

Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. Windows System RequirementsMac System Re...

Mac System Requirements To use your product and its software, your Mac should use one of these operating systems: • Mac OS X 10.4.11 • Mac OS X 10.5.8 • Mac OS X 10.6.x • Mac OS X 10.7.x Note: Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for the late...

Output resolution 50 to 4800, 7200, and 9600 dpi (50 to 4800 dpi in 1 dpi increments) Image data 16 bits per pixel per color internal 8 bits per pixel per color internal Light source LED Parent topic: Technical Specifications Paper Specifications Use paper under normal conditions: • Temperature: 59 ...

Envelopes Size No. 10 (4.1 × 9.5 inches [105 × 241 mm]) Paper types Plain bond paper Weight 20 lb (75 g/m 2 ) to 24 lb (90 g/m 2 ) Parent topic: Technical Specifications Printable Area Specifications Note: When printing borderless, quality may decline in the expanded printable area. Single sheets 1 ...

Envelopes 1 Left: 0.12 inch (3 mm) minimum 2 Bottom: 0.20 inch (5 mm) minimum 3 Top: 0.20 inch (5 mm) minimum 4 Right: 0.78 inch (20 mm) minimum Parent topic: Technical Specifications Ink Cartridge Specifications Note: We recommend that you use genuine Epson cartridges and do not refill them. The us...

Cartridge life Opened package: 6 months Unopened package: do not use if the date on the package hasexpired Temperature Storage: –4 to 104 ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Ink freezes at 10.4 ºF (–12 ºC) Ink thaws and is usable after 3 hours at 77 ºF (25 ºC) Note: For best printing results...

Related references Memory Card File Specifications Dimension Specifications Height Stored: 6.7 inches (169 mm) Printing: 6.7 inches (169 mm) Width Stored: 17.5 inches (445 mm) Printing: 17.5 inches (445 mm) Depth Stored: 14.4 inches (367 mm) Printing: 22.2 inches (565 mm) Weight 13.9 lb (6.3 kg) (wi...

Environmental Specifications Temperature Operating: 50 to 95 ºF (10 to 35 ºC) Storage: –4 to 104 ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Humidity Operating: 20 to 80% RH (non-condensing) Storage: 5 to 85% RH Parent topic: Technical Specifications Interface Specifications Interface type Hi-Speed ...

Safety and Approvals Specifications United States Safety: UL60950-1 EMC: FCC part 15 Subpart B Class B Canada Safety: CAN/CSA C22.2 No. 60950-1 EMC: CAN/CSA-CEI/IEC CISPR 22 Class B This equipment contains the following wireless module: • Manufacturer: Marvell Semiconductor Inc. • Type: SP88W8786-MD...

Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. FCC Compliance StatementSoftware NoticesTrademarksCopyright N...

For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing EquipmentRegulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materielbrouilleur du Canada. Parent topic: Notices Software Notices OPEN SOURCE...

busybox-1.2.2.1 ifupdown-0.6.8 kernel-2.6.18 lsp-arm-versatile926ejs-2.6.18_pro500 module-init-tools-3.2pre1 mount-2.12 net-tools-1.60 netbase-4.29 psmisc-21.5 readline-libs-5.0 sysvinit-2.86 udev-0.093 udhcp 0.9.8cvs20050124-5 util-linux-2.12 usb8786 GNU LGPL This printer product includes the open ...

This printer product includes the open source software program "Net-SNMP" which applies the termsand conditions provided by owner of the copyright to the "Net-SNMP". OpenSSL License/Original SSLeay License This printer product includes the open source software program "OpenSSL to...

This printer product includes the open source software program "libncurses" which applies the terms andconditions provided by owner of the copyright to the "libncurses". "libncurses" Program : libncurses-5.4 linux-ftpd license This printer product includes the open source sof...

Parent topic: Notices Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, ortransmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,without the prior written permission of Seiko Epson Corpor...

THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, EXPRESS,IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL,INCIDENTAL, INDIRECT ...