Epson D6150 - Manual

Quick Setup

Before using the projector, make sure you read the safety instructions in the

User’s Guide

on your projector CD.

Connect the projector

Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end of the cable to the projector’s

Computer1

or

Computer2

port, and the other end to your computer’s

monitor port. If you are using

a notebook, switch it to external display (see “Troubleshooting”). You can also
connect an audio cable. See the

User's Guide

on your projector CD for details.

Wired Network

You can connect the projector to your network using an Ethernet

®

cable.

See “Project over a wired network” for instructions.

Wireless Network

You can connect the projector wirelessly over an 802.11b, 802.11g, or 802.11n
wireless network using the optional Epson wireless LAN module. See “Project
wirelessly” on the back of this sheet for instructions.

” on the back of this sheet for instructions.

for instructions.

Video Device

Connect up to 5 video devices and use the

Source Search

button on the

projector or remote control to switch between them. (All cables are optional).
See the

User's Guide

on your projector CD for details.

RCA video cable (composite video) 

Component video to VGA cable

Audio cable

S-Video cable 

Audio cable 

HDMI cable

Camera, USB Device, or Epson Document Camera DC-06

Connect a digital camera, USB flash drive, USB storage device, or Epson
document camera DC-06 to the projector’s USB

TypeA

(flat) port.

If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s

Slideshow

feature. See the

User’s Guide

on your projector

CD for details.

External Monitor and External Speakers

You can also connect an external monitor and external speakers to your
projector to enhance your presentations. See the

User’s Guide

on your projector

CD for details.

Turn on your equipment

1

Turn on your computer or video source.

2

Plug in the projector.

The power light on the projector turns orange.

3

Press the

power button on the projector or remote control.

Power button

Power light

The power

light flashes green, then stays on.

Note:

To shut down the projector, press the

power button twice, then

unplug it. You don’t have to wait for the projector to cool down.

4

The default language of the menu system is

English

. To select another

language, press the

Menu

button on the remote control. Select

Extended

and press

Enter

. Select

Language

and press

Enter

. Select

your language and press

Enter

.

Press the

Menu

button to exit the

menu system.

Adjust the image

1

If you don’t see an image, press the

Source Search

button on the

projector or the remote control to select the image source.

Note:

If you still see a blank screen or have other display problems, see

the troubleshooting tips on the back of this sheet.

2

To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.

3

Open the zoom/focus ring cover and rotate the focus ring to sharpen the
image.

Focus ring

Zoom/focus ring 

cover

4

Turn the zoom ring to reduce or enlarge the image.

Zoom ring

5

If your image looks like

or

, you’ve placed the projector off to

one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely. Or press the or buttons on
the projector to correct it.

6

If your image looks like

or

, press the

or

buttons on the

projector to correct it.

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).

Choose which source 

to display

Turn projector 

on and off

Access projector 

menus

Turn off projector 

display and sound

Control projector 

volume

Navigate projector 

menus

For more information on using the remote control, see the

User’s Guide

on your

projector CD.

Project over a wired

network

Follow the steps here to configure your projector for your wired network
using the projector’s menu system.

1

Plug in and turn on the projector.

2

Press the

Menu

button on the remote control, select the

Network

menu, and press

Enter

.

3

Select

Network Configuration

and press

Enter

.

4

Select the

Basic

menu and press

Enter

.

5

Select the

Projector Name

setting and enter a name (up to 16

characters long) to identify your projector over the network.

Use the displayed keyboard to enter characters. Press the arrow buttons
on the remote control to highlight the characters and press

Enter

to

select them.

Note:

See the

User’s Guide

on the projector CD for information on

adding passwords.

6

Select the

Wired LAN

menu and press

Enter

.

7

Choose

IP Settings

and press

Enter

.

8

If your network assigns addresses automatically, select

IP Settings

and

turn on the

DHCP

setting. If not, turn off the

DHCP

setting and enter

the projector’s

IP Address

,

Subnet Mask

, and

Gateway Address

,

as needed.

9

To prevent the IP address from appearing on the network standby
screen, set the

IP Address Display

setting to

Off

.

PowerLite

®

D6150/D6155W/D6250

*412046400*

*412046400*