Epson C11CB20201 - Manual

4 The Display/Crop button 5 The LCD screen 6 The + and – buttons (increase or decrease the number of copies) 7 The arrow buttons and the OK button 8 The auto answer light 9 The Reset button 10 The WiFi light 11 The CD Tray button 12 The blue status light 13 The Menu button 14 The Back button 15 The ...

Parent topic: Setting Up the Control Panel Changing LCD Screen Language You can change the language used on the LCD screen. 1. Press the Home button, if necessary. 2. Press the arrow buttons and then select Setup . 3. Select Printer Setup . 4. Press the arrow buttons and then select Language . 5. Se...

Product Parts - Front 1 Output tray 2 Output tray extension 3 Paper stopper 4 Photo tray 5 Photo tray edge guides 6 Main tray 7 Main tray edge guides Parent topic: Product Parts Locations 21

Product Parts - Inside 1 Scanner unit 2 Print head 3 Ink cartridge holder Parent topic: Product Parts Locations 22

Product Parts - Back 1 USB port 2 LINE port 3 LAN port 4 EXT port 5 Auto duplexer 6 AC inlet Parent topic: Product Parts Locations Selecting Wireless Network Settings From the Touch Panel You can select or change wireless network settings using your product touch panel. To install your product on a ...

Note: Breakdown or repair of this product may cause loss of fax and network data and settings. Epson is not responsible for backing up or recovering data and settings during or after the warranty period. Werecommend that you make your own backup or print out your fax and network data and settings. 1...

Loading Paper Before you print, load paper for the type of printing you will do. Loading Paper in the Main TrayLoading Paper in the Photo TrayLoading EnvelopesPaper Loading CapacityAvailable Epson PapersBorderless Paper Type CompatibilityPaper or Media Type Settings Loading Paper in the Main Tray Yo...

1 Various paper sizes are marked on the tray Note: Make sure the paper fits beneath the top of the edge guide and does not flip up at the back end of the tray. 10. Lower the photo tray. 11. If you need to load paper in the photo tray, see the instructions for that section. 30

12. Replace the paper cassette. 13. Extend the output tray and open the paper stopper. 31

Note: Do not remove or insert the paper cassette during printing. Follow these guidelines for loading paper of this size or longer: Legal (8.5 × 14 inches [216 × 357 mm]): • Load one sheet at a time. • Extend the paper cassette and close the paper stopper on the output tray. • If necessary, allow th...

9. Extend the output tray and open the paper stopper. Note: Do not remove or insert the paper cassette during printing. Parent topic: Loading Paper Related references Paper Loading Capacity Related tasks Loading Paper in the Main TrayLoading Envelopes Loading Envelopes You can load envelopes in the ...

1. Close the output tray, if necessary. 2. Open the front cover. 37

6. Pinch the tabs on the main tray edge guides and slide them outward. 7. Load up to 10 envelopes in the main tray as shown. Load them printable side down and flap edgeleft. 39

13. Extend the output tray and open the paper stopper. Always follow these envelope loading guidelines: • If you have trouble loading a stack of envelopes, press each envelope flat before loading it or load one envelope at a time. • Do not load envelopes that are curled, folded, or too thin. Parent ...

Paper type Load up to this many sheets Epson Bright White Paper 100 sheets Epson Presentation Paper Matte Epson Ultra Premium Presentation Paper Matte 50 sheets Epson Premium Presentation Paper Matte Double-sided Epson Photo Paper Glossy 20 sheets Epson Premium Photo Paper Glossy Epson Ultra Premium...

Paper Type Size Part number Sheet count Epson Photo Quality Self-adhesive A4 (8.3 × 11.7 inches S041106 10 Sheets [210 × 297 mm]) Epson Iron-on Cool Peel Transfer Letter (8.5 × 11 inches S041153 10 paper [216 × 279 mm]) Parent topic: Loading Paper Borderless Paper Type Compatibility You can print bo...

Paper or Media Type Settings For this paper Select this paper Type or Media Type setting Plain paper Plain Paper/Bright White Paper Epson Bright White Paper Epson Iron-on Cool Peel Transfer paper Epson Photo Quality Self-adhesive Sheets Epson Ultra Premium Photo Paper Glossy Ultra Premium Photo Pape...

Placing Originals on the Product Follow the instructions here to place your original documents or photos on the product. Caution: Do not place anything on top of your product or use its cover as a writing surface to avoid damaging it. Placing Originals on the Scanner GlassPlacing Originals in the Au...

3. If you are copying two book pages onto one sheet, place the book as shown to copy the first page,then turn the book as shown to copy the second page. 4. Close the document cover gently to keep your original in place. Parent topic: Placing Originals on the Product Related topics CopyingScanning Pl...

3. Fan your stack of originals and tap them gently on a flat surface to even the edges. 4. Insert the originals into the ADF faceup and top-edge first. 50

5. Slide the ADF edge guide against the originals, but not too tightly. Parent topic: Placing Originals on the Product Related references Automatic Document Feeder (ADF) Specifications Related topics CopyingScanning 51

Copying See the information here to copy documents or photos using your product. Note: Copies may not be exactly the same size as your originals. Copying DocumentsCopying PhotosPaper Type Settings - CopyingPaper Size Settings - CopyingCopying Options Related tasks Copying onto a CD/DVD Copying Docum...

Copying Photos You can copy color or black-and-white photos onto specific sizes and types of paper, including Epsonspecial papers, for instant photo reprints. You can also restore the colors in faded photos as you copy. 1. Place your original photo on the scanner glass. 2. Load the paper you want to...

To change any of the settings displayed on the LCD screen, press the Menu button, select Paper and Copy Settings , select the necessary settings, and then press the OK button. 12. When you are ready to print, press the Start button. Note: To cancel printing, select Cancel . Parent topic: Copying Rel...

Paper type loaded Paper Type setting Plain paper Plain Paper Epson Bright White Paper Epson Presentation Paper Matte Epson Photo Paper Glossy Glossy Epson Premium Photo Paper Glossy Prem. Glossy Epson Premium Photo Paper Semi-gloss Epson Ultra Premium Photo Paper Luster Epson Ultra Premium Photo Pap...

Copying Options Select the copying options you want to use for your copies. Note: Not all options or settings may be available, depending on other copying settings. Copying option Available settings Description 2-Sided Printing On/Off Uses the duplexer to make 2-sided copies Layout With Border Leave...

Printing From a Computer Before printing documents or photos from your computer, make sure you have set up your product andinstalled its software as described on the Start Here sheet. Note: It is a good idea to check for updates to your product software on Epson's support website. Printing with Wind...

Reverse Order Prints multi-page print jobs last page first. Print Preview Displays a preview of your printout before printing. Parent topic: Selecting Basic Print Settings - Windows Selecting Advanced Print Settings - Windows Select print settings on the Advanced tab to customize the quality and col...

Color Management Options - Windows You can adjust the Color Management settings on the Advanced tab to fine-tune the colors in your printout, or turn off color management in your printer software. Color Controls Lets you select a Color Mode setting, individual settings for Brightness , Contrast , Sa...

Note: If you select the Min option for the Expansion setting, you may see white borders on your printed photo. • To print the borderless image at its actual size without scaling, select Retain Size as the Enlargement Method setting. • To add a watermark to your printout, select Watermark settings. •...

4. Select the double-sided printing options you want to use. 5. Click OK to return to the Page Layout tab. 6. To prevent ink from bleeding through the page, click the Adjust Print Density button. You see this window: 69

7. Select the type of document you are printing. The software automatically sets the Adjustments options for that document type. 8. If you selected the Manual document type, select the Adjustments options you want to use. 9. Click OK . 10. Print a test copy of your double-sided document to test the ...

Booklet Options Select a binding option to print double-sided pages as a booklet. Parent topic: Selecting Double-sided Printing Settings - Windows Print Density Adjustments - Windows When you select the Manual setting, you can select any of the available options on the Print Density Adjustment windo...

2. Place your cursor over a Printing Presets option to view its list of settings. 3. Use any of the available options on the screen to control your printing presets. 4. To choose an option for printing, select it. 5. Click OK . Parent topic: Printing with Windows Printing Your Document or Photo - Wi...

2. Click OK or Print to start printing. Checking Print Status - Windows Parent topic: Printing with Windows Checking Print Status - Windows During printing, you see this window showing the progress of your print job. It allows you to controlprinting and check ink cartridge status. 73

• To cancel printing, click Stop . • To see print jobs lined up for printing, click Print Queue . • To check ink status, click Check Ink Levels . Parent topic: Printing Your Document or Photo - Windows Selecting Default Print Settings - Windows When you change your print settings in a program, the c...

3. Select the print settings you want to use as defaults in all your Windows programs. 4. Click OK . These settings are now the defaults selected for printing. You can still change them as needed forprinting in any program session. Changing the Language of the Printer Software Screens Parent topic: ...

Changing Automatic Update Options Your printer software for Windows automatically checks for updates to the product driver and firmware.You can change how often the software checks for updates or disable this feature. 1. Right-click the product icon in the Windows taskbar. 2. Select Auto Update Sett...

4. If necessary, click the arrow next to the Printer setting or the Show Details button to expand the print window. You see the expanded printer settings window for your product: Note: The print window may look different, depending on the version of Mac OS X and the application you are using. 79

9. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 10. Select the Print Quality setting you want to use. 11. Select any of the available print options. Print Quality Setting...

Selecting Page Setup Settings - Mac OS X 10.5/10.6/10.7 Depending on your application, you may be able to select the paper size and orientation settings fromthe print window. Note: If you do not see these settings in the print window, check for them in your application before printing. They may be a...

Note: Some options may be pre-selected or unavailable, depending on other settings you have chosen or if you are accessing the product over a network. This screen may be different, depending on theversion of Mac OS X you are using. 1. Select one of the Two-sided Printing options. 85

2. Select the type of document you are printing as the Document Type setting. The software automatically sets the Adjustments options for that document type. 3. If necessary, customize the Adjustments settings as instructed on the screen. 4. Print a test copy of your double-sided document to test th...

Printing with Mac OS X 10.4 You can print with your product using any Mac OS X printing program, as described in these sections. Selecting Page Setup Settings - Mac OS X 10.4Selecting Basic Print Settings - Mac OS X 10.4Selecting Print Layout Options - Mac OS X 10.4Selecting Double-sided Printing Se...

Related tasks Selecting Basic Print Settings - Mac OS X 10.4 Selecting Basic Print Settings - Mac OS X 10.4 Select the basic settings for the document or photo you want to print. 1. Select the print command in your application. Note: You may need to select a print icon on your screen, the Print opti...

4. Select Print Settings from the pop-up menu. 5. Select the type of paper you loaded as the Media Type setting. Note: The setting may not exactly match the name of your paper. Check the paper type settings list for details. 6. Select the Print Quality setting you want to use. 7. Select any of the a...

Selecting Print Layout Options - Mac OS X 10.4 You can select layout options for multi-page documents by selecting Layout from the pop-up menu on the print window. • To print multiple pages on one sheet of paper, select the number of pages in the Pages per Sheet pop-up menu. To arrange the print ord...

1. Select Color Options from the pop-up menu in the print window. 2. Select one of the available options. Color Options - Mac OS X 10.4 Parent topic: Printing with Mac OS X 10.4 Color Options - Mac OS X 10.4 You can select from these settings on the Color Options menu. Manual Settings Lets you selec...

2. Select the following options as necessary: • To cancel printing, click the print job and click Delete . • To pause printing, click the print job and click Hold . To resume printing, click the print job marked "Hold" and click Resume . • To check ink status, click Supply Levels . Parent to...

Scanning You can scan original documents or photos and save them as digital files on your computer. Starting a ScanSelecting Epson Scan SettingsScanning with Mac OS X 10.6/10.7Scanning Special Projects Starting a Scan After placing your original documents or photos in your product for scanning, star...

4. Press the arrow buttons to view additional scan options, then select the one you want. • Scan to Memory Card saves your scan file on a memory card and lets you select the file format, quality, and other settings. • Scan to PC saves your scan file directly to your computer or as an image capture i...

• Mac OS X 10.4/10.5 : Open the Applications folder, click Epson Software , and click Event Manager . 2. Click Make Job Settings . 3. Open the Edit Job Settings drop-down list and select the scan button settings you want to view or change. 4. Change the settings as necessary. 5. Click OK . Parent to...

Parent topic: Starting a Scan Related tasks Scanning with Mac OS X 10.6/10.7 Related topics Selecting Epson Scan Settings 107

Starting a Scan from a Scanning Program You can start Epson Scan from a scanning program to select scan settings, scan, and open the scannedimage in the program. Note: You cannot use Epson Scan with Mac OS X 10.6/10.7. 1. Open your scanning program and select its scanning option. (See your scanning ...

Selecting Epson Scan Settings After starting Epson Scan, you can select settings in various modes to customize your scan. Scan ModesSelecting the Scan ModeScanning in Home ModeScanning in Office ModeScanning in Professional ModeImage Preview GuidelinesScan Resolution GuidelinesSelecting Scan File Se...

Parent topic: Selecting Epson Scan Settings Related tasks Scanning in Home ModeScanning in Office ModeScanning in Professional Mode Scanning in Home Mode When you scan in Home Mode, Epson Scan automatically saves your scanned file in JPEG format inyour operating system's Pictures or My Pictures fold...

2. Select the Document Type setting that matches your original, such as Photograph or Text/Line Art . 3. Select the Image Type setting that matches your original. 112

Selecting a Scan Area - Home Mode You can select a specific area in your preview image to include in your scanned image. You can selectthe entire image area or a portion of it. You can even select multiple scan areas to create multiplescanned images of different areas (Normal Preview mode only). You...

• Normal preview : Click the Auto Locate icon to create a marquee (dotted line) on the preview image. 115

2. Do the following, as necessary, to work with the selected scan area: • If the marquee is correct, continue with the next step. • To move the marquee, click inside the scan area and drag the marquee where you want it. • To resize the scan area, place your cursor over the edge or corner of the marq...

4. To create a scanned image size that is not available in the Target Size list, click the Customize option. 5. Name the custom size, enter the size, click Save , and click OK . Then create a scan area on the preview image. The marquee is automatically proportioned for your custom scan size. Parent ...

Epson Scan previews your original and displays the result in a separate Preview window. 7. If desired, select the area in your preview image that you want to scan (scanned image area). 8. Select any of the image adjustment settings you want to use. Before making adjustments, click theimage or scanne...

• To resize the scan area, place your cursor over the edge or corner of the marquee, then click and drag the edges where you want them. (Hold down the Shift key as you resize the marquee to retain the same width/height proportions.) • To create additional marquees (up to 50), click the Copy Marquee ...

Text Enhancement Sharpens the appearance of letters in text documents. Auto Area Segmentation Makes grayscale images clearer and text recognition more accurate by separating the text from thegraphics. Color Enhance Enhances the red, green, or blue shades in the scanned image. Brightness Adjusts the ...

• Normal preview : To create additional marquees (up to 50), click the Copy Marquee icon to copy the existing marquee and paste it on the preview image. • To delete a marquee, click the marquee, then click the Delete Marquee icon. 3. Click inside the scan area and make any necessary settings in the ...

Selecting a Scan Size - Professional Mode You can reduce or enlarge the size of your image as you scan. You can also select a specific scan size,such as a common photo size like 4 × 6 inches (102 × 152 mm). This places a scan area of that size onthe preview image so you can use it to help crop the i...

• Unlock icon: Unlocks the width/height proportions of the scanned image size so you can adjust it without constraint. Parent topic: Scanning in Professional Mode Image Preview Guidelines You can preview your scanned image so you can adjust the scan settings using the preview as a guide.There are tw...

Parent topic: Selecting Epson Scan Settings Selecting Scan File Settings You can select the location, name, and format of your scan file on the File Save Settings window. Youcan also select various optional settings that control how Epson Scan behaves when you scan and savefiles. The File Save Setti...

3. Click Show Details . 4. Select your scan settings as necessary. 5. Select the folder in which you want to save your scanned file in the Scan To pop-up menu. 6. Click Scan . Your scanned file is saved in the folder you selected. Parent topic: Scanning Scanning Special Projects Your product's scann...

Scanning to a PDF File Using Epson Scan, you can scan a multi-page document and save it in one PDF (Portable DocumentFormat) file on your computer. 1. Place your original on your product for scanning. 2. Start Epson Scan. 3. Select the scan mode you want to use. 4. Select the scan settings for your ...

7. Select PDF as the Type setting. 8. Select any other settings you want to use on the File Save Settings window. 9. Click OK . Epson Scan scans your document and you see this window: 142

Related topics Starting a ScanSelecting Epson Scan Settings Restoring Photo Colors as You Scan You can restore the colors in faded photos as you scan them using Epson Scan's Color Restorationsetting. You can select this setting in any of the available scan modes. 1. Place your original on your produ...

Convert Scanned Documents to Editable Text (OCR) You can scan a document and convert the text into data that you can edit with a word processing,spreadsheet, or HTML-editing program. This process is called OCR (Optical Character Recognition). To scan and use OCR, you need to install an OCR program, ...

Your document is scanned and processed into editable text, then you see the Save As window. 10. Select a name and a file format for your document and click Save . The file is saved and then opened in an application associated with the file type you selected, ifavailable on your system. Parent topic:...

Faxing See these sections to fax using your product. Note: This product allows you to store names, telephone numbers, and fax data in its memory even when the power is turned off. Make sure you restore all of the default settings if you give away or disposeof the product. This will erase all of your...

3. Connect the second phone cable to your telephone or answering machine and to the EXT. port on your product. Note: If you connect an answering machine and Auto Answer is turned on, make sure the product's Rings to Answer setting is set higher than the number of rings your answering machine is set ...

Setting Up Fax Features Using the Product Control Panel See these sections to set up fax features using the product control panel. Selecting Your Country or RegionSelecting the Date and TimeEntering Fax Header InformationEntering Numbers and Characters for FaxingSelecting Fax Send and Receive Settin...

4. Press the arrow buttons and then select Country/Region . 5. Press the arrow buttons, if necessary, then select your country or region. You see a confirmation screen. 6. If the setting is correct, select Yes . (If not, select No and retry.) Note: Changing the country or region restores the fax set...

2. Press the arrow buttons and then select Setup . 3. Select Printer Setup . You see this screen: 4. Press the arrow buttons and then select Daylight Saving Time . 5. Select one of the following settings for the current conditions in your area: • Winter : it is winter or your region does not use Day...

2. Press the arrow buttons and then select Setup . 3. Press the arrow buttons and then select Fax Settings . You see this screen: 4. Select Communication . 5. Press the arrow buttons and then select Header . 6. Select Fax Header . You see this screen: 156

7. Use the numeric keypad to enter the sender name for your fax source, such as your name or abusiness name. You can enter up to 40 characters. 8. Press the OK button. You return to the Header screen. 9. Select Your Phone Number . You see this screen: 157

10. Use the numeric keypad to enter your fax number, up to 20 characters. For international numbers that require use of a + symbol, press the # key. Note: When entering a phone number, the * key does not work. 11. Press the OK button. You return to the Header screen. Parent topic: Setting Up Fax Fea...

5. Change any of the available settings. 6. Press the OK button to exit. Parent topic: Setting Up Fax Features Using the Product Control Panel Selecting Fax Communication Settings You can customize how your product sends and receives faxes over your phone line. 1. Press the Home button, if necessary...

Restoring Default Fax Settings You can restore your fax settings to their default options, if necessary. 1. Press the Home button, if necessary. 2. Press the arrow buttons and then select Setup . 3. Press the arrow buttons and then select Restore Default Settings . You see this screen: 4. Select one...

Fax Send/Receive Settings Restores all of the default fax settings on the Send Settings , Receive Settings , and Communication screens. Fax Data Settings Erases the speed dial list, group dial list, header, and fax log. Wi-Fi/Network Settings Restores all of the default network settings. All Except ...

5. Select Fax Settings for Printer . You see this window: 168

6. Select your product. 7. Select Fax Settings . 8. Follow the prompts that appear on the screen to enter your fax header information and select yourfax settings. Note: For detailed information, select the Fax Utility Help option. Parent topic: Setting Up Fax Features Setting Up Fax Features Using t...

2. Double-click FAX Utility . You see this window: 3. Select your FAX product in the Printer list. 4. Select Fax Settings . 5. Follow the prompts that appear on the screen to enter your fax header information and select yourfax settings. Note: For detailed information, select the Fax Utility ? icon....

Setting Up Speed/Group Dial Lists Using the Product Control Panel You can set up your speed dial and group dial lists using the control panel on your product. Creating Speed Dial List EntriesPrinting Your Speed Dial ListCreating Group Dial List EntriesPrinting Your Group Dial List Parent topic: Sett...

4. Select Speed Dial Setup . 5. Select Create . You see this screen: 6. Select the number you want to use for the fax number you are adding and press OK . 7. Use the numeric keypad to enter the fax number. You can enter up to 64 characters. 8. Press OK . You see this screen: 172

Creating Group Dial List Entries You can create a group dial list after creating a speed dial list. Each group dial list can include up to 30fax numbers. Note: You can create up to 60 speed dial and group dial entries combined. 1. Press the Home button, if necessary. 2. Select Fax . 3. Press the Men...

4. Select Group Dial Setup . 5. Select Create . You see this screen: 6. Select the number you want to use for the group dial entry you are adding and press OK . 7. Use the numeric keypad to enter a name for the group dial entry. You can enter up to 30 characters. 8. Press OK . You see a screen simil...

You see this screen: 6. Press the arrow buttons and then select Group Dial List . 7. Press the Start button to print the report. Parent topic: Setting Up Speed/Group Dial Lists Using the Product Control Panel Setting Up Speed/Group Dial Lists Using the Fax Utility - Windows You can set up your speed...

6. Select your product. 7. Select Speed Dial/Group Dial List . You see this window: 180

Setting Up Speed/Group Dial Lists Using the Fax Utility - Mac OS X You can set up your speed dial and group dial lists using the Fax Utility. The utility also lets you importfax numbers from the MacAddress Book and back up fax numbers to your product's memory. Note: You can create up to 60 speed dia...

5. To add an entry, double-click an empty entry. Note: To edit an entry, select it and change the information. To delete an entry, select it and press the Delete key on your keyboard. 6. Do one of the following: • To create a speed dial entry, select Speed Dial , enter a name and fax number, and cli...

Sending Faxes Using the Fax Utility - Mac OS X Parent topic: Faxing Sending Faxes from the Product Control Panel See these sections to send faxes using the product's control panel. Manually Dialing or Redialing Fax NumbersSelecting Fax Numbers from Speed or Group Dial ListsDialing Fax Numbers from a...

3. Select Fax . 4. Dial the fax number from the connected telephone. You see this screen: 5. Select Send . Note: You product now communicates with the recipient's fax machine. Do not hang up the telephone. 188

Setting Options Description Resolution Standard Provides good scan resolution and print quality formost faxes. Fine Provides best scan resolution and print quality forfaxes of small print and line art. Photo Provides best scan resolution and print quality forfaxed photos. Contrast –4 to +4 Adjusts t...

6. Enter your sender information so that recipients can identify the origin of the fax. Then click OK to save the sender information. 7. Add a cover sheet, input a fax number, or set up a phone book of numbers for future use, then click Next . Note: For detailed instructions on using the Epson FAX U...

8. Select the Color and Image Quality settings you want to use for your fax. 9. Click Fax . Parent topic: Sending Faxes Receiving Faxes See these sections to receive faxes with your product. Fax ReceptionReceiving Faxes Automatically (Auto Answer)Receiving Faxes Manually Parent topic: Faxing 195

Fax Reception Your product will automatically receive and print faxes when you set fax reception mode to Auto Answer . If you connected a telephone to your product so you can use the same phone line for faxes and voicecalls, you can also set your product to receive faxes manually. This allows you to...

Using Memory Cards With Your Product Follow the instructions here to work with a memory card inserted into your product. Inserting a Memory CardPrinting from a Memory CardTransferring Photos on a Memory Card Inserting a Memory Card Insert only one memory card at a time in one of your product's memor...

Note: Do not force the card all the way into the slot. Insert it only until it meets resistance. The memory card access light flashes and then stays lit. Caution: Do not remove a memory card or turn off your product while the memory card access light is flashing or you may lose data from the memory ...

• Microdrive Parent topic: Inserting a Memory Card Memory Card File Specifications You can insert memory cards in your product containing files that meet these specifications. File format JPEG with the Exif version 2.3 standard Image size 80 × 80 pixels to 9200 × 9200 pixels Number of files Up to 99...

2. If your product is connected to your computer using a USB cable, do one of the following: • Windows : Open the My Computer , Computer , or Windows Explorer utility. Then right-click the name of your memory card (listed as a removable disk) and select Eject . • Mac OS X : Drag the removable disk i...

2. Select Print Photos 3. Select View and Print Photos . You see a screen like this: 4. Press the arrow buttons to scroll through your photos and view the one you want. Note: To display 9 photos at a time on the LCD screen, press the Display/Crop button three times. 203

Related tasks Cropping Photos Displayed on the LCD ScreenModifying Photos Displayed on the LCD ScreenSelecting Print Settings for Photos Displayed on the LCD ScreenInserting a Memory CardRemoving a Memory Card Printing All Photos You can quickly select all of the photos on your memory card or other ...

You see this screen: 3. Select a photo adjustment setting. 4. Select an option for the setting. Note: To clear any previously used settings, press the Reset button. 5. When you finish selecting settings, press the OK button. Parent topic: Viewing and Printing Photos Related references Photo Adjustme...

Print settings Available options Description Borderless Borderless Expands the image to the edge of the paper (slight croppingmay occur) With Border Leaves a small margin around the image Quality Draft Provides lower quality for draft printing Standard Quality Provides good quality for most prints B...

2. Select Print Photos . 3. Press the arrow buttons and then select Photo Layout Sheet . You see this screen: 4. Press the arrow buttons to view all of the layout options, then select the option you want. 5. Press Paper Size , then select the size that matches the paper you loaded. Depending on the ...

Upper ½ or Lower ½ Print one photo in the upper or lower half of the sheet. Photo ID Prints 4 ID-sized photos on one sheet. Jewel Upper Prints one photo on the upper half of a folded jewel case insert. Jewel Index Prints 24 to 48 thumbnail images on a folded jewel case insert. Picture Package Prints...

2. Select Print Photos . 3. Select Print Photo Greeting Card . You see this screen: 4. Select Select Photo and Print Template , then press OK . 5. Press the arrow buttons to select the photo you want, then press the OK button. You see this screen: 219

1. Use a dark pen or pencil to fill in the circles and select the Text Style and Text Effects. 2. Add your greeting card message. You can write it in by hand, print a message and paste it into thebox, or draw a picture. Tip: When adding text, place it in the direction that your photo faces. 3. Load ...

6. Close the document cover. 7. To print more than one copy, press the + or – button to select the number (up to 99). 8. When you are ready to print, press the Start button. Note: To cancel printing, select Cancel . When you finish printing, cut your greeting cards apart, if necessary. Parent topic:...

4. To change any of the print settings displayed on the LCD screen, press the Menu button, select Print Settings , and select the necessary settings. Then press the OK button. 5. When you are ready to print, press the Start button. Note: To cancel printing, select Cancel . Parent topic: Printing fro...

3. Do one of the following to access your memory card files from your computer: • Windows : Select the Computer or My Computer utility. • Mac OS X : Look for the removable disk icon on your desktop. 4. Select the removable disk icon. 5. Select the folder that contains your photos. 6. Drag the photos...

2. Insert your USB flash drive or the USB cable for your external drive into the USB port on the front of your product. 3. Insert storage media (such as a CD) into your drive, if necessary. 4. Press the Home button, if necessary. 5. Press the arrow buttons and then select Back Up Data . 225

6. Select Back Up Memory Card . 7. Follow the instructions on the screen to disconnect the product from your computer and begincopying files to the external device. 8. When the backup is finished, you can remove your memory card and disconnect the external device. The files are saved in folders numb...

Using an External Device with Your Product Follow the instructions in these sections to use your product with an external device, such as a camera,smartphone, flash drive, or other device. Wireless Printing from a Mobile DevicePrinting from a Camera Connected to Your ProductViewing or Printing from ...

Connecting and Printing From a Camera Before you connect your camera, make sure the product is turned on but not printing. 1. Remove any memory cards from the product. 2. Load the paper you want to use for printing. 3. Connect the USB cable that came with your camera to the USB port on the front of ...

5. Follow the instructions that came with your camera to select and print your photos. When you finish printing, turn off your camera and disconnect it from the product. Parent topic: Printing from a Camera Connected to Your Product Related tasks Removing a Memory Card Related topics Loading Paper S...

4. Select Print Settings . You see this screen: 5. Select the print settings you want to use, then press the Back button. 6. Select Photo Adjustments and press the OK button. You see this screen: 230

Viewing or Printing from a USB Flash Drive or External Device You can view and print photos from a USB thumb drive or other external storage device, such as anexternal hard drive or CD/DVD burner. Note: Make sure the files on your device are compatible with the product. USB Device File Specification...

4. Insert storage media (such as a CD) into your drive, if necessary. 5. If there are folders on your storage media, select the folder you want and press the OK button. You can view and print your photos from the LCD screen. When you finish printing, make sure the access light on the drive is not fl...

Printing Personalized Projects You can turn any photo or drawing into a coloring book page, or print lined paper, graph paper, orstationery with a photo background. Printing Coloring Book PagesPrinting Personalized Note PaperPrinting Lined Paper and Graph Paper Printing Coloring Book Pages You can c...

Placing Originals on the Product Printing Personalized Note Paper You can print lined or unlined note paper with one of your own photos in the background. 1. Load plain paper in either Letter (8.5 × 11 inches [216 × 279 mm]) or A4 (8.3 × 11.7 inches[210 × 297 mm]) size. 2. Insert a memory card into ...

7. Press the arrow buttons to scroll through your photos and display the one you want to use for yournote paper. Note: To rotate the layout, press Rotate . 8. Press the OK button. 9. When you see a message asking you to load paper, press the OK button. 10. To print more than one sheet, press the + o...

Printing on CDs/DVDs Follow the instructions here to print a design onto ink jet-printable CDs or DVDs to create a custom label. CD/DVD Printing FeaturesLoading a CD/DVDRemoving a Printed CD/DVDPlacing a CD/DVD on the Scanner GlassCopying onto a CD/DVDPrinting Photos from a Memory Card Onto a CD/DVD...

1. Make sure you burn your files, music, or video onto your disc before printing on it. 2. Push in the output tray. 3. Raise the control panel all the way up. 4. Press the CD Tray button. Caution: Do not try to pull the tray out; it extends automatically as far as possible. 243

5. Place your disc on the CD/DVD tray with the label side up. Gently press it into place. 6. Press the CD Tray button to position the disc for printing. Note: The CD/DVD tray will retract automatically if you wait several minutes before pressing the button. Caution: Do not turn off the product with ...

3. Lower the control panel. After printing, handle the CD/DVD carefully. You may need to wait up to 24 hours for the ink to dry fullybefore inserting it in a drive, depending on the type of disc you used. Keep printed discs away frommoisture and direct sunlight. Parent topic: Printing on CDs/DVDs Pl...

2. Place your CD/DVD facedown in the center of the scanner glass. 3. Close the document cover gently to keep your disc in place. Parent topic: Printing on CDs/DVDs Copying onto a CD/DVD You can copy a printed photo or CD/DVD label directly onto an ink jet-printable CD or DVD. 1. Press the Home butto...

3. Press the Menu button. 4. Select CD/DVD Copy . 5. Follow the instructions on the LCD screen to place a CD/DVD or photo on the scanner glass. 6. If necessary, adjust the inner and outer diameter of your CD as shown on the screen, then press the OK button. You see this screen: 7. Select one of the ...

You see this screen: 7. Select one of the options shown on the screen, then follow the instructions to load a CD/DVD or printa test on paper. 8. Select the print settings you want, then press the Start button to print. Parent topic: Printing on CDs/DVDs Related tasks Loading a CD/DVDInserting a Memo...

7. Press the + or – button to set the number of copies, then press the OK button. You see this screen: 8. If you want to change any print settings or make photo adjustments, press the Menu button. 9. When you are ready to print, press the Start button. 10. After your insert is printed, cut and fold ...

Printing on a CD/DVD with Windows You can print with your product using the Epson Print CD software, as described in these sections. Designing a CD/DVD - WindowsPrinting Your CD/DVD Design - WindowsAdjusting CD/DVD Print Position - WindowsAdjusting CD/DVD Print Quality - Windows Parent topic: Printi...

2. Select Print Density Confirmation Pattern . 3. Click Print . 4. Remove the disc after printing and check to see if you need to make the density darker or lighter. 5. Load the same disc in the product again. 6. Adjust the Print Color Correction slider to a darker or lighter setting as necessary. 7...

Replacing Ink Cartridges When an ink cartridge is expended, you need to replace it. You may also need to replace a cartridge that is more than six months old, if your printouts do not looktheir best, even after cleaning and aligning the print head. Note: Please dispose of your used Epson branded ink...

Note: The display is different depending on which ink cartridges are low or expended, if any. Displayed ink levels are approximate. 4. Press the OK button to exit. Parent topic: Check Cartridge Status Checking Cartridge Status with Windows A low ink reminder appears if you try to print when ink is l...

2. Replace or reinstall any ink cartridge indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson Status Monitor will not display an accurate cartridge status. 3. To disable the low ink reminder, ...

4. Deselect the See Low Ink Reminder alerts checkbox at the bottom of the screen. 5. To disable promotional offers, deselect the Display Epson Offers checkbox. Parent topic: Check Cartridge Status Related tasks Removing and Installing Ink Cartridges 265

Checking Cartridge Status with Mac OS X You can check the status of your ink cartridges using a utility on your Mac. 1. Do one of the following: • Mac OS X 10.6/10.7 : In the Apple menu or the Dock, select System Preferences . Select Print & Fax or Print & Scan , select your product, and sel...

3. Do the following as necessary: • You can update the ink cartridge status by clicking Update . • Replace or reinstall any ink cartridge indicated on the screen. Note: If any of the cartridges installed in the product is broken, incompatible with the product model, or improperly installed, Epson St...

Ink color Part number Standard-capacity High-capacity Magenta 99 98 Yellow 99 98 Light Cyan 99 98 Light Magenta 99 98 Parent topic: Purchase Epson Ink Cartridges Removing and Installing Ink Cartridges Make sure you have your replacement cartridges handy before you begin. You must install newcartridg...

After the product checks the cartridges, ink replacement is complete. If you see an error message,an ink cartridge may not be installed properly. Lift the scanner unit, then press the ink cartridge downuntil it clicks into place If you remove a low or expended ink cartridge, you cannot re-install an...

• Click Disable this feature to continue using the remaining black ink. Note: If you disable this feature, it remains disabled unless you reinstall the printer software. Parent topic: Replacing Ink Cartridges 273

Adjusting Print Quality If your print quality declines, you may need to run a utility to clean or align the print head. If running these utilities does not solve the problem, you may need to replace the ink cartridges. Print Head MaintenancePrint Head AlignmentCleaning the Paper Path Print Head Main...

3. Press the arrow buttons and then select Setup . 4. Select Maintenance . You see this screen: 5. Select Nozzle Check . You see this screen: 6. Press the Start button. After the nozzle pattern prints, you see this screen: 275

7. Check the printed pattern to see if there are gaps in the lines. Print head is clean Print head needs cleaning 8. Do one of the following: • If there are no gaps, select Finish Nozzle Check . Press the Home button to exit. 276

6. If there are no gaps, click Finish . If there are gaps or the pattern is faint, clean the print head. Parent topic: Print Head Nozzle Check Related concepts Print Head Cleaning Print Head Cleaning If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean ...

5. Select Head Cleaning . You see this screen: 6. Press the Start button to clean the print head. You see a message on the LCD screen during the cleaning cycle. Caution: Never turn off the product during a cleaning cycle or you may damage it. When the cleaning cycle is finished, you see this screen:...

4. Click Start to begin the cleaning cycle. You see a message on the LCD screen during the cleaning cycle. Caution: Never turn off the product during a cleaning cycle or you may damage it. 5. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle Check...

Print head needs cleaning • If there are no gaps, click Finish . • If there are gaps or the pattern is faint, click Clean to clean the print head again. If you don’t see any improvement after cleaning the print head up to 4 times, leave the product on andwait at least 6 hours.Then try cleaning the p...

Aligning the Print Head Using the Product Control Panel You can align the print head using the control panel on your product. 1. Make sure plain paper is loaded in the product. 2. Press the Home button, if necessary. 3. Press the arrow buttons and then select Setup . 4. Select Maintenance . You see ...

6. Press the Start button to print an alignment sheet. Note: Do not cancel printing while you are printing a head alignment pattern. You see this screen: 7. Check the printed pattern and select the number representing the best printed pattern for each set. 8. Press the OK button when you are finishe...

Aligning the Print Head Using a Computer Utility You can align the print head using a utility on your Windows computer or Mac. 1. Load a few sheets of plain paper in the product. 2. Do one of the following: • Windows: Right-click the product icon in the Windows taskbar. • Mac OS X 10.6/10.7 : In the...

5. Check the printed pattern and follow the instructions on the screen to choose the numberrepresenting the best printed pattern for each set. • After choosing each pattern number, click Next . • If no patterns are aligned in one or more of the sets, choose the closest one in each set and click Real...

Cleaning the Paper Path If you see ink on the back of a printout, you can clean the paper path to remove any excess ink. 1. Load a few sheets of plain paper in the product. 2. Use the product control panel to make a copy, but without placing a document on the scanner glass. 3. Check the back of the ...

Cleaning and Transporting Your Product See these sections if you need to clean or transport your product. Cleaning Your ProductTransporting Your Product Cleaning Your Product To keep your product working at its best, you should clean it several times a year. Close the output tray and front cover whe...

Solving Problems Check these sections for solutions to problems you may have using your product. Checking for Software UpdatesProduct Status MessagesRunning a Product CheckResetting Control Panel DefaultsSolving Setup ProblemsSolving Network ProblemsSolving Copying ProblemsSolving Paper ProblemsSolv...

Related tasks Changing Automatic Update Options Product Status Messages You can often diagnose problems with your product by checking the messages on its LCD screen. Youcan also see help information and how-to instructions on the screen. Press the Home button, if necessary, press the arrows, and the...

LCD screen message Condition/solution Backup Error A problem occurred while backing up data to an external USB device. Notethe displayed error code and contact Epson for support. Error code XXXXX Parent topic: Solving Problems Related references Paper Jam Problems Inside the ProductPaper Jam Problem...

8. Do the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selectedsettings. Check the other solutions i...

3. Press the arrow butons and then select Restore Default Settings . You see this screen: 4. Select one of these options: • Fax Send/Receive Settings : Resets all settings on the Send Settings, Receive Settings, and Communication screens. • Fax Data Settings : Erases the speed dial list, group dial ...

Noise After Ink Installation If you hear noises from your product after installing ink, try these solutions: • The first time you install ink cartridges, the product must prime its print head. Wait until priming finishes before you turn off the product, or it may prime improperly and use excess ink ...

• If you see any error message or your software does not install correctly in Windows, you may not have software installation privileges. Contact your System Administrator. Parent topic: Solving Setup Problems Related concepts When to Uninstall Your Product Software Related references Windows System...

Note: Avoid placing your product near a microwave oven, 2.4 GHz cordless phone, or large metal object, such as a filing cabinet. • Verify that your router or access point is operating correctly by connecting to it from your computer or another device. • You may need to disable the firewall and any a...

Cannot Print Over a Network If you cannot print over a network, try these solutions: • Make sure that your product is turned on. • Make sure you install your product's network software as described in your product documentation. • Print a network status sheet and verify that the network settings are...

Solving Copying Problems Check these solutions if you have problems copying with your product. Product Makes Noise, But Nothing CopiesProduct Makes Noise When It Sits for a While Parent topic: Solving Problems Product Makes Noise, But Nothing Copies If your product makes a noise, but nothing copies,...

Paper Feeding Problems If you have problems feeding paper, try these solutions: • If paper does not feed for printing, remove it from the tray. Reload it against the right side, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside thecassette. • If mu...

Caution: Do not touch the flat white cable inside the printer. 4. Pull back on the tabs to remove the cover inside the product and remove any jammed paper. 308

5. Reattach and close the cover inside the product. 6. Close the scanner. 7. Press the Start button to resume printing. If you still see a paper jam message, check the other paper jam solutions. 8. Carefully follow all paper loading instructions when you load new paper. Parent topic: Solving Paper P...

Paper Jam Problems in the Main Tray If you see a message that paper has jammed in the main tray, try these solutions: 1. Close the output tray. 2. Pull out the paper cassette. 310

7. Press the Start button to resume printing. If you still see a paper jam message, continue with these steps. 8. Turn off the product and unplug it from the electrical outlet. 9. Close the output tray. 10. Pull out the paper cassette. 11. Close the front cover. 312

12. Turn the product over onto the side and remove any jammed paper beneath. 13. Open the front cover and replace the paper cassette. 313

14. Press the Start button to resume printing. If you still see a paper jam message, check the other paper jam solutions. Parent topic: Solving Paper Problems Related references Paper Jam Problems Inside the ProductPaper Jam Problems in the Auto DuplexerPaper Jams in the Automatic Document Feeder Pa...

Paper Jam Problems in the Main TrayPaper Jams in the Automatic Document Feeder Paper Jams in the Automatic Document Feeder If you have problems with paper jams in the automatic document feeder (ADF), try these solutions: 1. Remove your originals from the ADF. 2. Open the ADF cover. 3. Remove any jam...

Paper Ejection Problems If you have problems with paper ejecting properly, try these solutions: • If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper. Select the correct paper size when you reprint. • If paper is wrinkled when it ejects, it may be...

• If you connected your product to a USB hub, make sure it is a first-tier hub. If it still does not print, connect your product directly to your computer instead of the hub. • Run a product check to see if a test page prints. If the test page prints, check to see if your product software is install...

6. Click the Shortcut Icon box. 7. Click OK to close the open program windows. Parent topic: Solving Problems Printing from a Computer Error After Cartridge Replacement If you see an error light or error message after you replace an ink cartridge, try this solution: 1. Remove and reinsert the ink ca...

• Page Rendering Mode • Print as Bitmap Parent topic: Solving Problems Printing from a Computer Related references Windows System RequirementsMac System RequirementsPaper or Media Type Settings Related tasks Selecting Basic Print Settings - WindowsSelecting Basic Print Settings - Mac OS X 10.5/10.6/...

Parent topic: Solving Page Layout and Content Problems Related tasks Selecting Print Layout Options - WindowsSelecting Basic Print Settings - WindowsSelecting Basic Print Settings - Mac OS X 10.5/10.6/10.7Selecting Basic Print Settings - Mac OS X 10.4 Too Many Copies Print Make sure that the Copies ...

Incorrect Margins on Printout If your printed page has incorrect margins, try these solutions: • Make sure you selected the correct paper size settings in your printing program and printer software. • Make sure you selected the correct margins for your paper size in your printing program. • Make sur...

Selecting Page Setup Settings - Mac OS X 10.4Selecting Basic Print Settings - Mac OS X 10.4 Incorrect Characters Print If incorrect characters appear in your prints, try these solutions before reprinting: • Make sure any interface cables are securely connected at both ends. • In Windows, clear any s...

Selecting Basic Print Settings - Mac OS X 10.4 Related topics Loading Paper Slanted Printout If your printouts are slanted, try these solutions: • Slide the edge guides against the edges of the paper. • Select a higher print quality setting in your printer software. Parent topic: Solving Page Layout...

• Turn off any high speed settings in your product software. • Align the print head. • You may need to replace the ink cartridges. Parent topic: Solving Print Quality Problems Related concepts Print Head CleaningPrint Head Alignment Related references Paper or Media Type Settings Related tasks Selec...

• Align the print head. • Clean the paper path. Note: Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions. Parent topic: Solving Print Quality Problems Related concepts Print Head CleaningPr...

Parent topic: Solving Print Quality Problems Related concepts Print Head Cleaning Related tasks Selecting Basic Print Settings - WindowsSelecting Basic Print Settings - Mac OS X 10.5/10.6/10.7Selecting Basic Print Settings - Mac OS X 10.4 Related topics Replacing Ink CartridgesLoading Paper Grainy P...

Incorrect Colors If your printouts have incorrect colors, try these solutions: • Make sure the Black/Grayscale or Grayscale setting is not selected in your printer software. • Clean the print head. • The ink cartridges may be old or low on ink, and you may need to replace them. • Your printed colors...

• If you upgraded your operating system but did not reinstall your scanning software, try reinstalling it. Note: Epson Scan is not available for Mac OS X 10.6/10.7. Parent topic: Solving Scanning Problems Related references Windows System RequirementsMac System Requirements Cannot Start Epson Scan I...

Back of Original Image Appears in Scanned ImageRipple Patterns Appear in an ImageScanned Image Colors Do Not Match Original ColorsScan Area is Not Adjustable in Thumbnail PreviewScanned Image Edges are Cropped Parent topic: Solving Problems Related topics Solving Print Quality Problems Image Consist...

Straight Lines in an Image Appear Crooked If straight lines in an original appear crooked in a scanned image, make sure to place your originalstraight when you scan it. Parent topic: Solving Scanned Image Quality Problems Related topics Placing Originals on the Product Image is Distorted or Blurry I...

• Brightness • Histogram Adjustment • Check the brightness and contrast settings of your computer monitor. Parent topic: Solving Scanned Image Quality Problems Related topics Selecting Epson Scan Settings Back of Original Image Appears in Scanned Image If an image from the back of a thin original ap...

• Adjust the Auto Exposure setting. Parent topic: Solving Scanned Image Quality Problems Related topics Selecting Epson Scan Settings Scan Area is Not Adjustable in Thumbnail Preview If you cannot adjust the scan area while viewing a Thumbnail preview in Epson Scan, try these solutions: • Create a s...

Memory Card Does Not Fit Into a Slot If a memory card does not fit properly in a slot, do not force it in. You may need to use an adapter withyour memory card. Parent topic: Solving Memory Card Problems Related references Memory Card Types Related tasks Inserting a Memory Card Cannot View or Print P...

• If you are using your product on a network, make sure that the network File Sharing setting for your product is set to allow write access over the network. Parent topic: Solving Memory Card Problems Related references Memory Card TypesMemory Card File Specifications Related topics Transferring Pho...

Note: If your product is connected to a VoIP (Voice over Internet Protocol) phone line, keep in mind that fax machines are designed to work over analog phone lines. Epson cannot guarantee that faxtransmission will work when using VoIP. If your phone line includes voice mail answering services, calls...

1. Turn off the product. 2. Disconnect any interface cables. 3. Click or Start , and select All Programs or Programs . 4. Select EPSON , select your product, then click EPSON Printer Software Uninstall . Note: If you see a User Account Control window, click Yes or Continue . 5. In the next window, s...

2. Extract the contents of the zip file you downloaded onto your hard drive. 3. Quit all applications currently running on your Mac. 4. Open the Applications > Epson Software folder. 5. Double-click the Uninstall Center icon. 6. Select the checkbox for each software program you want to uninstall....

• Canada: (905) 709-3839, 6 AM to 8 PM, Pacific Time, Monday through Friday Days and hours of support are subject to change without notice. Toll or long distance charges mayapply. Purchase Supplies and Accessories You can purchase genuine Epson ink and paper at Epson Supplies Central at www.epson.co...

Technical Specifications These sections list the technical specifications for your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. Windows System RequirementsMac System Re...

Note: Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for the latest in compatibility and drivers for your product. Parent topic: Technical Specifications Mac System Requirements To use your product and its software, your Mac should use one of these ope...

Output resolution 50 to 4800, 7200, and 9600 dpi (50 to 4800 dpi in 1 dpi increments) Image data 16 bits per pixel per color internal 8 bits per pixel per color internal Light source LED Parent topic: Technical Specifications Automatic Document Feeder (ADF) Specifications Paper input Faceup loading ...

Resolution Monochrome : Standard: 200 × 100 dpi Fine: 200 × 200 dpi Photo: 200 × 200 dpi Color : Fine: 200 × 200 dpi Photo: 200 × 200 dpi Error correction mode CCITU/ITU Group 3 fax with error correction mode Speed dial/group dial numbers Up to 60 (combined) Page memory Up to 180 (ITU-T No. 1 chart ...

Single-sheets Size A4 (8.3 × 11.7 inches [210 × 297 mm]) A6 (4.1 × 5.8 inches [105 × 148 mm]) Letter (8.5 × 11 inches [216 × 279 mm]) Legal (8.5 × 14 inches [216 × 357 mm]) 4 × 6 inches (102 × 152 mm) 5 × 7 inches (127 × 178 mm) 8 × 10 inches (203 × 254 mm) 16:9 wide (4 × 17.1 inches [102 × 434 mm])...

1 0.7 inch (18 mm) minimum inner margin 2 3.2 inch (80 mm) maximum outer margin Note: Avoid printing in the clear plastic areas of discs to prevent staining the disc with ink. Parent topic: Technical Specifications Ink Cartridge Specifications Note: We recommend that you use genuine Epson cartridges...

Temperature Storage: –4 to 104ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Ink freezes at 3.2 ºF (–16 ºC) Ink thaws and is usable after 3 hours at 77ºF (25 ºC) Note: For best printing results, use up a cartridge within 6 months of opening the package. Note: Ink cartridges may contain recycled materia...

Parent topic: Technical Specifications Related references Memory Card File Specifications Dimension Specifications Height Stored: 7.8 inches (198 mm) Printing: 7.8 inches (198 mm) Width Stored: 18.3 inches (466 mm) Printing: 18.3 inches (466 mm) Depth Stored: 18.0 inches (458 mm) Printing: 25.8 inch...

Environmental Specifications Temperature Operating: 50 to 95 ºF (10 to 35ºC) Storage: –4 to 104 ºF (–20 to 40 ºC) 1 month at 104 ºF (40 ºC) Humidity Operating: 20 to 80% RH (non-condensing) Storage: 5 to 85% RH Parent topic: Technical Specifications Interface Specifications Interface type Hi-Speed U...

Parent topic: Technical Specifications Network Interface Specifications Wireless LAN standard IEEE 802.11 b/g/n Wireless security WPA-PSK (TKIP/AES) WPA2 compliant WEP (64/128 bit) Frequency band 2.4 GHz Communication mode Infrastructure mode Ad hoc mode Ethernet standard 100BASE-TX/10BASE-T Note: W...

Notices Check these sections for important notices about your product. Note: Epson offers a recycling program for end of life products. Please go to www.epson.com/recycle for information on how to return your products for proper disposal. FCC Compliance StatementSoftware NoticesTrademarksCopyright N...

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCCCertification o...

3. The open source software programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. See the licenseagreements of each open source software program for more details, which are described in OSS.pdfon your Printer Software CD. 4. Ope...

sysvinit-2.85 telnetd_0.17.21 udhcp 0.9.8cvs20050124-5 util-linux-2.12 usb8786 GNU LGPL This printer product includes the open source software programs which apply the GNU Lesser GeneralPublic License Version 2 or later version ("LGPL Programs"). The list of LGPL Programs: inetutils-ftpd_1.4...

busybox_1.7.2 coreutils_5.2.1 ftp_0.17 libc6_2.3.6 inetutils-ftpd_1.4.2 linux-ftpd-0.17 module-init-tools-1.60.9 netkit-inetd_0.10 netkit-ping_0.10 portmap_5-2.1 util-linux-2.12 Sun RPC License This printer product includes the open source software programs which apply the Sun RPC License("Sun R...

ARC4 license This printer product includes the open source software program "ARC4" which applies the terms andconditions provided by owner of the copyright to the "ARC4". "ARC4" Program: ARC4 json_parserlicense This printer product includes the open source software program &#...

Epson Store SM is a service mark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may betrademarks of their respective owners. Epson disclaims any and all rights in those marks. Parent topic: Notices Copyright Notice All rights reserved....

libTIFF Software Acknowledgment Copyright © 1988-1997 Sam Leffler Copyright © 1991-1997 Silicon Graphics, Inc. Permission to use, copy, modify, distribute, and sell this software and its documentation for any purposeis hereby granted without fee, provided that (I) the above copyright notices and thi...