Epson Ap1310-DC - Manual
Epson Ap1310-DC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 3 – INTRODUCTION
- Page 5 – MODES OF OPERATION; printer motor is not running; MODE
- Page 6 – calibration data, and the full character set; PAPER
- Page 7 – LED INDICATIONS; LED Pattern Table; Pattern; Other LED Patterns
- Page 8 – PRINTER OPERATION AND PROGRAMMING; DATA BUFFER; a command from the host; CHARACTER PRINTING AND FONTS
- Page 9 – RS-232 SERIAL INTERFACE
- Page 10 – CONNECTIONS AND EMC PRECAUTIONS
- Page 13 – of our; web site; Our
ABLE Systems Limited
DENTON DRIVE, NORTHWICH, CHESHIRE, CW9 7TU, ENGLAND
Tel: +44 (0)1606 48621
Fax:+44 (0)1606 44903
Website: www.able-systems.com
e-mail: [email protected]
USER GUIDE
to the
Ap1310-DC
Thermal Printer
Revision:
“1.2”
Filename:
“AP1310DCusg12.doc”
Date:
“28 May 2008”
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Ap1310-DC User Guide Page 2 of 13 1 TABLE OF CONTENTS 1 Table Of Contents ........................................................................................................................ 2 2 Introduction............................................................................................
Ap1310-DC User Guide Page 3 of 13 2 INTRODUCTION This document is a User Guide, written for the person connecting and using the Able Systems Ap1310-DC thermal printer. Please read this Guide carefully before making any connection. A separate Programmer Guide provides details of the control codes, an...
Ap1310-DC User Guide Page 5 of 13 3 MODES OF OPERATION The Ap1310-DC has two operating modes, when not actually printing: "Idle Mode": ready to accept data, but no data are in the buffer awaiting printing, and the printer motor is not running; "Spool Mode": active, but storing data f...
