Epson AcerPower F1- User Manual

Contents FCC notice iii Macrovision® copyright protection notice iv Lithium battery statement iv Laser compliance statement v System Tour 1 Front panel 1 Rear panel 2 System Features 3 Performance 3 Multimedia 3 Connectivity 3 System peripherals 4 Mouse(PS/2 or USB, manufacturing option) 4 Keyboard(...

1 Englis h System Tour Your computer’s front panel consists of the following: Front panel No. Description No. Description 1 Optical Drive 2 Floppy Drive 3 Power button 4 USB Ports 5 Microphone Jack 6 Speaker or Headphone Jack

System Tour 2 En gli sh Rear panel No. Description No. Description 1 Power cord socket 2 Voltage selector switch 3 Fan Aperture 4 PS/2 Keyboard Port 5 PS/2 Mouse Connector 6 Serial Connector 7 Printer Connector 8 Monitor Connector 9 USB Connectors 10 RJ-45 Ethernet Connector 11 Microphone Jack 12 Li...

3 Englis h System Features Your computer features: Performance • Intel® Pentium® 4/Celeron® CPU • System Memory DDR 266/333/400, 2 DIMM Slots, expandable to 2GB • Power management function • 3.5 inch floppy drive • CD-ROM, DVD-ROM, CD-RW (52X/24X), DVD/CD-RW combo or DVD writer • High-capacity, Enha...

System Tour 4 En gli sh System peripherals The AcerPower F1 computer consists the system itself, and system peripherals, like a mouse, a keyboard and a set of speakers (optional). This section provides a brief description of basic system peripherals. Mouse(PS/2 or USB, manufacturing option) The incl...

5 Englis h Speakers For systems bundled with speakers, before powering on the system, connect the speaker cable to the audio out (external speaker) port on the back panel of the system. For more detailed information about the speakers, please refer to the included operating instructions. Note: speak...

System Tour 6 En gli sh Open the computer Before removing any panels or covers, please make sure to shut off the computer and unplug the power cord from the outlet.• Remove the two screws on the side panel. • Slide the panel back and off. Set up new components You can only use components compatible ...

7 Englis h Setting up your computer AcerPower F1 is a versatile, high-power system, supporting Intel® Socket 478 CPUs. The computer uses PCI (Peripheral Component Interface) and AGP (Accelerated Graphics Port) design. This improves system efficiency and helps the system support varied multimedia and...

Setting up your computer 8 En gli sh Ensure that all items are present and in good condition. If any of the following items are missing or appear damaged, contact your dealer immediately. • AcerPower F1 Series • PS/2 or USB keyboard (manufacturing option) • PS/2 or USB mouse (manufacturing option) •...

9 Englis h Starting your computer After connecting all the peripheral equipment, start your computer according to the below steps:1 Power on all peripheral equipment, such as monitor, printer, fax, speakers etc. 2 Turn on the system. Once the start-up process is complete, you can begin to use the co...

11 Englis h Troubleshooting The following questions are possible situations that may arise during the use of your computer and each is followed by simple answers and solutions to the situation. Q: I pressed the power switch but the system did not boot up. A: Check the LED located above the power swi...

15 Englis h Taking Care of your computer Please read the important instructions listed in this section. Following these instructions will help you maximize the durability of your computer. Important tips • Do not expose the computer to direct sunlight. Do not place it near sources of heat, such as a...

Taking Care of your computer 16 En gli sh To clean your pointing device To clean your mouse (with rubber ball) 1 Open the circular cover underneath the mouse. 2 Take out the rubber ball and wipe it with a soft, damp cloth. 3 Put the ball back and replace the cover. To clean your optical mouse For us...