Epson 320 SERIES - Manual
Epson 320 SERIES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Start Here
3
Squeeze the edge guide as you slide it all the way to the
left.
Tip:
If the clear plastic feeder guard is in the way, move it
forward.
4
Load letter- or A4-size paper against the right edge and
behind the tab, with the printable side face up.
5
Slide the edge guide over.
6
Connect the phone cord
To fax, connect the included phone cord to a telephone wall
jack and to the
LINE
port on your product. To connect a
telephone or answering machine, see the
Quick Guide
.
Note:
If you’re connecting to a DSL phone line, you must use a DSL
filter or you won’t be able to fax. Contact your DSL provider for the
necessary filter.
Read these instructions before using your product.
1
Unpack
French control
panel stickers
(included for
Canada only)
Power cord
Phone cord
Caution:
Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2
Turn on
1
Connect the power cable.
Caution:
Do not connect to your computer yet.
2
Press the
On
button.
3
Select settings
1
To select
English
as your language, press
OK
.
(If you want to change the language, press or to
select it, then press
OK
.)
2
Select your
Country/Region
and press
OK
.
3
Select the current
Daylight Saving Time
setting (
Winter
or
Summer
) and press
OK
.
4
Select the
Date
format and press
OK
.
5
Press the number keys to enter the
Date
and press
OK
.
6
Select the
Time
format (
12h
or
24h
) and press
OK
.
7
Press the number keys to enter the
Time
. Then press
or to select
AM
or
PM
, if necessary.
8
Press
OK
.
4
Install ink cartridges
Note:
Do not load paper yet.
1
Lift up the scanner.
2
Open the cartridge cover.
3
Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4
Remove only the yellow tape from each cartridge.
Caution:
Don’t remove any other seals or the cartridges may
leak.
5
Insert the cartridges in the holder for each color.
6
Press each cartridge down until it clicks.
7
Close the cartridge cover. Press down until it clicks.
8
Lower the scanner.
9
Press the
OK
button to charge the ink.
Priming takes about 2½ minutes.
Note:
Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
Caution:
Don’t turn off the printer while it is priming or you’ll
waste ink.
5
Load paper
1
Open the paper support and pull up the extensions.
2
Pull out the output tray extensions and raise the stopper.
*411867400*
*411867400*
WorkForce
®
320 Series
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
