Page 2 - TABLE OF CONTENTS; INSTRUCTIONS; hsi
1 TABLE OF CONTENTS TABLE OF CONTENTS …………………………….………………….. 1 FOR YOUR SAFET Y …………………………………………………... 2 PRECAUT IONS AND REMINDERS ……………………………………3 IMPORTANT SAFETY INSTRUCTIONS …………………………….. 5 PREPARAT ION ………………………………………………………… 7 PERIPHERAL CONNECTION GUIDE ………………………………. 11 OPERATING INSTRUCTIONS …...
Page 3 - FOR YOUR SAFETY; the receiver is connected.; NOTICE; comply with the emission limits.; English
2 FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Cla...
Page 4 - PRECAUTIONS AND REMINDERS
3 Place unit on even surfaces. Don't place the TV in confined spaces or in a box when using it. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Unplug immediately if other foreign materials are put inside TV box or if the TV fell down. Don't throw any...
Page 6 - IMPORTANT SAFETY INSTRUCTIONS
5 Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufac...
Page 7 - hs
6 18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately o...
Page 8 - Install the base stand place the TV on a solid surface.; Connect the antenna cable or CATV cable to the aerial socket; PREPARATION; sil
7 Please, make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1 . Install the base stand; place the TV on a solid surface. Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cove...
Page 9 - in stand by state.; POWER key; set is power on. If the LED color is red , which means this TV set is
0 4 1 7 3 6 9 5 2 8 Power Pre-CH 8 3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). 4. Power: Insert the power cord in the wall socket having an AC power supply. You can in stand by state. 5. Turn on the TV: Push the POWER key on the Re...
Page 10 - Attaching Wall Mounting Arm
9 Preparing to Install An Optional Wall Mounting Arm: 1. Remove the lid on back cover 2. push the stand ahead until hear “ ka ” This TV can be attached to a wall mounting arm you purchase separately (The height of WALL MOUNTING should be over 21mm). Disconnect power before this procedure. Follow the...
Page 13 - TO USE THE FRONT PANEL CONTROL; Menu; OPERATION INSTRUCTIONS
1 2 TO USE THE FRONT PANEL CONTROL ĺĹĸķ ķ ĸ - VOL + VOL - : Press to decrease the sound volume level. VOL +: Press to increase the sound volume level. Ĺ ʳ ʳʳ Power ʳ Power key: Press to turn on / off (standby) the TV set. (Press to turn on TV after the Power-ON status LED had changed to the Amber co...
Page 14 - TO USE THE REMOTE CONTROL
1 3 h sil g n E “COMP” Press repeatedly to choose Component sour ce mode. “PC” Press repeatedly to choose VGA sou r ce mode “MENU/EXIT” Press to open or exit the OSO menu. “ ”,“ ”,“ ”,“ ” Press to adjust the various function items on the menu. Press to d i splay the previous TV “CH- / CH +” Press + ...
Page 15 - TO USE THE MENUS; How to navigate through the Settings menus; button on the remote control to display the Settings menu.; Introduction
14 TO USE THE MENUS How to navigate through the Settings menus The Settings menu allows you to access and change settings and preferences settings. • Press the MENU button on the remote control to display the Settings menu. - Use cursor up/down to highlight and select a menu item on the left panel. ...
Page 16 - OK; button on the highlighted item to activate and to dismiss the; button again to exit the Settings menu.
15 Note: Sometimes not all the menu items are visible on the screen. Use cursor down to scroll down to additional items. - Use the cursor right to enter the right panel. The content of the right panel is moved to the left panel and the right panel shows the content of the newly highlighted item in t...
Page 19 - Channel tuning
18 take longer than Analog to find and program. Please wait until you see the Auto Programming complete message. The TV will then switch automatically to the first channel found. Note: All channels must be unlocked in order to autoprogram. If requested, enter your PIN code to unlock all channels. (p...
Page 20 - Weak channel installation; Note: Digital Channel selection delay
19 with the message Audio only. Note: Subchannel selections The new standards employed with digital broadcasting make it possible to receive multiple program channels under a single major channel number which can be selected by pressing the digit remote control direct-access channel number entry. Im...
Page 21 - button on the remote control.; Installation; in the Settings menu.; Current software info; the TV software; Source
20 Here’s how: 1.In the antenna mode, select a channel from the displayed list of TV channels. Select the “Start” by pressing red button on the remote control; TV set will detect the signal. 2.The signal strength is continuously displayed and updated as you rotate the antenna. When strength is enoug...
Page 23 - AV1 supports component input.; Clock
22 AV1 AV1 supports component input. AV2 (S-video/CVBS) AV2 supports two source inputs (S-video and CVBS) and automatically search the inputs, S-video is the high priority. In case you have two inputs and want to show the signal from CVBS, please turn off S-video device or plug off s-video cable....
Page 24 - Reset AV settings; with the cursor down key.; button to erase settings and reset them to their default values.; Features menu; in the TV Settings menu.; Closed captions
23 This function allows you to reset most of the picture and sound settings to their default factory levels. 1.Select Reset AV settings with the cursor down key. 2.Press the cursor right key. 3.Press the OK button to erase settings and reset them to their default values. TV MENU- FEATURES Features m...
Page 25 - Feature; menu. This text can either be; Caption service
24 This displays the transmitted CC- or CS-text on the screen according to your chosen CC or CS service in the Feature menu. This text can either be permanently displayed (assuming that the service is available in the broadcast) or only when mute is active. 1.Press the cursor right key after having ...
Page 26 - Digital caption service; Caption informations included.
25 Captions programs, news, weather informations or stock market reports. Not all Caption services are necessarily being used by a TV channel during the transmission of a Closed Caption program. 4.See Closed Caption in the TV, Features menu, to turn the Caption service On or Off. Note: This televisi...
Page 28 - Note: Opacity is transparent (allowing light to pass through); Preferred channels
27 • Text Select this option to choose caption display text box, text color and/or the opacity according to your own preference. Select a color and an opacity option. • Background Select this option to choose caption display character back ground color or one of the background opacity options accord...
Page 29 - is selected, the sleeptimer is
28 Sleeptimer This sets a time period after which the TV automatically turns to standby. 1.Select Sleeptimer . 2.Press the cursor right key. 3.Select a value with the cursor up/down key. The list will have values from Off to 180 minutes. When Off is selected, the sleeptimer is turned off. You can al...
Page 30 - to display a list of predefined picture settings, each; Personal; refers to the personal; Auto picture; button on the remote control repeatedly to
29 1.Press the cursor right key to select Picture . 2.Press the cursor right key again to enter the Picture menu. 3.Select the menu items with the cursor up/down key. 4.Adjust the settings with the cursor left/right key or enter the list of submenu items with the cursor right key. Select a submenu i...
Page 32 - Auto sound
31 TV MENU- SOUND 1. Select Sound in the TV Settings menu. 2.Press the cursor right key to enter the sound menu. 3.Select the menu items with the cursor up/down key and adjust the settings with the cursor left/right key. 4.Remember, control settings are at normal mid-range levels when the bar scale ...
Page 33 - Speech
32 1.Press the cursor right key to enter the list. 2.Press the cursor up/down key to select a predefined sound setting ( Personal/Speech/Movies ). Personal refers to the personal preference sound settings in the sound menu. The default mode is Speech . Note: The moment you are in a predefined Auto s...
Page 34 - Digital audio language; TV MENU- PARENTAL CONTROL
33 Digital audio language This gives you the possibility to swap between main and alternative language, when it is available in digital channel. AVL (Automatic Volume Leveler) Automatically reduces the volume differences between channels and programs, providing a more constant overall level. This wi...
Page 36 - TV ratings lock
Page 37 - TV ratings; lock with the cursor down. A list appears, showing the; to activate/de-activate the selected rating. You are asked to enter
36 Your TV is equipped with a V-chip. This allows you to control access to individual programs based on their movie and TV ratings. All settings apply to all AV inputs, except HDMI. The program content advisory data are sent by the broadcaster or program provider. 1.Select TV ratings lock with the c...
Page 38 - When; has been selected, all items in the age-based and in the; All; rating of; None; . Both will be locked. When an item on the age-based list is
37 When All has been selected, all items in the age-based and in the contents-based lists are locked. If, while All is selected, any other item, either an age-based or content-based item, is unselected, then All is automatically unselected. None is the selection for items that either have no rating ...
Page 39 - Movie Ratings Lock; for children aged 2-6
38 Movie Ratings Lock TV-Y appropriate for children of all ages with themes and elements suitable for children aged 2-6 TV-Y7 programs designed for children age 7 and older TV-Y7-FV programs include fantasy violence more intense than other programs in the TV-Y7 category TV-G programs suitable for al...
Page 40 - then; is automatically unselected.; NR; has been selected, no other item is selected.
39 This function allows you to control access to individual movies based on their MPAA ratings (Motion Picture Association of America). 1.Select Movie ratings lock with the cursor down. A list appears, showing all valid MPAA content ratings. 2.Press the cursor right to enter the list. You are asked ...
Page 42 - Region ratings lock; with the cursor down. A list appears, showing the
41 1.Select Region ratings lock with the cursor down. A list appears, showing the age-based Region ratings and a corresponding contentbased ratings list. 2.Press the cursor right to enter the list. 3.Select an age-based Region rating with the cursor up/down, and enter, if present, the list with cont...
Page 43 - with the cursor down.; PC MENU-INSTALLATION
42 This allows you to clear all the locks that you have set in the Region ratings lock table. 1.Select Clear regions locks with the cursor down. 2.Enter your PIN-code to clear all region ratings’ status. PC MENU-INSTALLATION Select the menu language Note: Press SOURCE button on the remote control to...
Page 46 - Picture menu; Press the cursor right key to select; Picture
45 PC MENU-PICTURE Picture menu 1.Press the cursor right key to select Picture . 2.Press the cursor right key again to enter the Picture menu. 3.Select the menu items with the cursor up/down key. 4.Adjust the settings with the cursor left/right key or enter the list of submenu items with the cursor ...
Page 48 - Auto Sound; Note: The moment you are in a predefined Auto sound setting and you; Virtual sound; Adds greater depth and dimension to PC sound.
47 4.Remember, control settings are at normal mid-range levels when the bar scale is entered. Auto Sound Select Auto sound to display a list of predefined sound settings, each corresponding with specific factory settings of Treble and Bass. 1.Press the cursor right key to enter the list. 2.Press the...
Page 49 - TIPS; Reorient or relocate the receiving antenna.
48 TIPS Care of the screen Do not rub or strike the screen with anything hard as this may scratch, mar, or damage the screen permanently. Unplug the power cord before cleaning the screen. Dust the TV by wiping the screen and the cabinet with a soft, clean cloth. If the screen requires additional cle...
Page 51 - Wall Mounting; PRODUCT SPECIFICATION
50 NOTE:*This model complies with the specifications listed below. *Designs and specifications are subject to change without notice. *This model may not be compatible with features and/or specifications that may be added in the future. Television System: NTSC standard ATSC standard (8-VSB, Clear-QAM...
Page 52 - *This may be caused by obstruction to the; BEFORE CALLING SERVICE
51 Please make these simple checks before calling service. These tips may save you time and money since charges for receiver installation and adjustments of customer controls are not covered under your warranty. Symptoms Items to Check and Actions to follow “Ghost ” or double image *This may be caus...
Page 53 - GLOSSARY; Motion Picture Association of America
52 GLOSSARY Audio / Video Inputs Located on the rear and the front of the receiver these connectors (RCA phono type plug) are used for the input of audio and video signals. Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection opti...
