Envision EN7600 - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS

1 TABLE OF CONTENTS TABLE OF CONTENTS -----------------------------------------------1FOR YOUR SAFETY --------------------------------------------------2 SAFETY PRECAUTIONS --------------------------------------3SPECIAL NOTES ON LCD MONITORS -------------------4 BEFORE YOU OPERATE THE MONITOR ------...

Page 4 - PRECAUTIONS

3 PRECAUTIONS  Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.  Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Us...

Page 5 - BEFORE YOU OPERATE THE MONITOR; FEATURES; CHECKING THE CONTENTS OF THE PACKAGE

4 SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES  Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.  ...

Page 6 - Install; POWER CORD; your PC, depending on the type of power cord supplied with your LCD; NOTES; ) shall be used. Alternative a flexible

5 INSTALLATION INSTRUCTIONS SWIVEL BASE Install Remove Figure 1 Installing and Removing the Swivel Base POWER CORD Power Source: 1. Make sure that the power cord is the correct type required in your area. 2. This LCD monitor has an External universal power supply that allows operation in either 100/...

Page 7 - CONTROLS AND CONNECTORS; VIDEO CABLE; Connect one end of the 15-pin D-Sub cable; Connecting the Power Cord:; Connect the power cord into your LCD

6 CONTROLS AND CONNECTORS VIDEO CABLE Connecting the D-Sub Cable: Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D- Sub port. Connecting the Power Cord: Connect the power cord into your LCD monitor’s power input socket, and then plug ...

Page 8 - ADJUSTING THE VIEWING ANGLE; You are able to adjust the monitor’s angle from -5

7 ADJUSTING THE VIEWING ANGLE  For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.  Hold the stand so you do not topple the monitor when you change the monitor’s angle.  You are able to adjust the monitor’s angle f...

Page 9 - OPERATING INSTRUCTIONS; GENERAL INSTRUCTIONS; The power cord should be connected.; EXTERNAL CONTROLS

8 OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.  The power cord should be...

Page 11 - HOW TO ADJUST A SETTING

10 HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window.2. Press or to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press or again to navigate through the sub-menu funct...

Page 12 - ADJUSTING THE PICTURE

11 ADJUSTING THE PICTURE The descriptions for function control LEDS Main Menu Item Main Menu Icon Sub Menu Item Sub Menu Icon Description Contrast Contrast from Digital-register. Luminance Brightness Backlight Adjustment Focus Adjust Picture Phase to reduce Horizontal-Line noise Image Setup Clock Ad...

Page 14 - female configuration.

13 PLUG AND PLAY Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capab...

Page 17 - APPENDIX; SPECIFICATIONS

16 APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 43.2cm(17.0") Pixel pitch 0.264mm( H ) × 0.264mm( V ) Video R,G,B Analog Interface Input Separate Sync. H/V TTLH-Frequency 30kHz – 80kHz V-Frequency 55-75Hz Display Colors 16.2M Colors Dot Clock 135MHz Max. Resolution 1280 × ...

Page 19 - Preset Display Modes

18 Preset Display Modes STANDARD RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY Dos-mode 720 x 400 31.47kHz 70.0Hz 640 × 480 31.47kHz 60.0Hz VGA 640 × 480 37.50kHz 75.0Hz 800 × 600 37.879kHz 60.0Hz SVGA 800 × 600 46.875kHz 75.0Hz 1024 × 768 48.363kHz 60.0Hz 1024 × 768 56.476kHz 70.0Hz XGA 1024 ×...

Page 20 - CONNECTOR PIN ASSIGNMENT

19 1 5 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1. Red 9. +5V 2. Green 10. Detect Cable 3. Blue 11. TXD 4. RXD 12. DDC-Serial Data 5. Ground 13. H-Sync 6. R-Ground 14. V-Sync 7. G-Ground 15. DDC-Serial Clock 8. B-Ground CONNECTOR PIN ASSIGNMENT

Envision EN7600 - Manual

Table of Contents:

Summary

Other Envision Models