Electrolux EWS 125410 A - Manual

DISPLAY 2 A B C D The display shows: A • The delay start When you press the delay start button,the display shows the delay start time. B • The default spin speed of the pro- gramme. • 'No Spin' ( 00 ). C • The display symbols. The symbols appear on the display whenthe related function is set. D • Th...

PROGRAMMES Programme Temperature Type of load and soil Weight of load Programme phases Possible functions Bawe ł niane 90 – 75 °C White cotton with heavy soil. Thisprogrammes add also the phaseof hygiene to the laundry.max. 5 kg WashRinsesSpin phase at themaximum speed + Bawe ł niane Eco 1) 60 °C Wh...

Programme Temperature Type of load and soil Weight of load Programme phases Possible functions We ł niane 40 °C – Cold Machine washable wool. Handwashable wool and delicate fab-rics with «hand washing» caresymbol.max. 1 kg WashRinsesSpin phase at 800rpm — Handwash - Silk30 °C Hand washable delicate ...

energy and water consumption for washingthat type of cotton laundry.They agree with EN60456. The actual water temperature may dif-fer from the declared cycle tempera-ture. HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing ins...

Level Type Water hardness °dH °T.H. mmol/l Clarke 3 hard 15-21 26-37 2.6-3.7 17-25 4 very hard > 21 > 37 >3.7 >25 BEFORE FIRST USE 1. To activate the drain system, put 2 litre of water in the main wash compartmentof the detergent dispenser. 2. Put a small quantity of detergent in the mai...

If the temperature and level of the wa-ter in the drum are too high, you can-not open the door.To open the appliance door:• Do the steps 1 and 2 again.• Wait for some minutes.• Make sure that no water is in the drum. AT THE END OF THE PROGRAMME • The appliance stops automatically.• The display shows...

DETERGENT DISPENSER To clean the dispenser:1. Press the lever and pull the dispenser out. 2. Remove the top part of the liquid addi- tive compartment. 3. Clean all the parts with water. 4. Clean the dispenser recess with a brush. 5. Put back the dispenser in the recess. DRAIN PUMP Regularly examine ...

3. Unscrew the filter to let the water flow out. 4. When the container is full of water, screw the filter again and empty thecontainer. Do steps 3 and 4 again andagain until no more water flows outfrom the drain pump. 5. Unscrew the filter and remove it. 1 2 6. Remove fluff and objects from the pump...

4. Install again the inlet hose. Make sure that the couplings are tight to preventleakages. 5. Open the water tap. EMERGENCY DRAIN Because of a malfunction, the appliancecannot drain the water.If this occurs, do steps (1) through (5) of 'Toclean the drain pump'.If necessary, clean the pump.When you ...

Problem Possible cause Possible solution The appliance fills withwater and drain imme-diately. The end of the drain hose istoo low. Make sure that the drain hose is in thecorrect position. Refer to 'Installation'. The washing resultsare not satisfactory. The detergent you used wasnot sufficient or c...

With the plastic hose guide. • • On the edge of a sink. Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide to the water tap or the wall. • To a stand pipe with vent-hole. Refer to the illustration. Directly into adrain pipe at a height of not less than 60cm and no...