Page 2 - TABLE OF CONTENTS
TABLE OF CONTENTS SHC-2620 / S 2 X7502342003 © 07/19 ECHO Incorporated TABLE OF CONTENTS Table of Contents ........................................................................................ 2Introduction .............................................................................................
Page 3 - INTRODUCTION; OR
SHC-2620 / S INTRODUCTION X7502342003 3 © 07/19 ECHO Incorporated INTRODUCTION Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and acc...
Page 4 - SERVICING INFORMATION; Service
SERVICING INFORMATION SHC-2620 / S 4 X7502342003 © 07/19 ECHO Incorporated SERVICING INFORMATION Parts/Serial Number Genuine ECHO Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Numbe...
Page 5 - SAFETY; Manual Safety Symbols and Important Information; Note: This enclosed message provides tips for use, care and; International Symbols
SHC-2620 / S SAFETY X7502342003 5 © 07/19 ECHO Incorporated SAFETY Manual Safety Symbols and Important Information Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. The following is an explanation of th...
Page 8 - Physical Condition; Your judgment and physical dexterity may not be good:; Eye Protection
SAFETY SHC-2620 / S 8 X7502342003 © 07/19 ECHO Incorporated Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit. Physical Condition Your judgment and phy...
Page 9 - Proper Clothing
SHC-2620 / S SAFETY X7502342003 9 © 07/19 ECHO Incorporated Proper Clothing Wear snug-fitting, durable clothing: • Pants should have long legs, shirts should have long sleeves. • DO NOT WEAR SHORTS. • DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or hanging items that could become entan...
Page 11 - Read the Manuals; • Provide all users of this equipment with the Operator’s Manual for; Clear the Work Area; tightly encircling the handles.; Keep a Solid Stance; • Maintain footing and balance at all times. Do not stand on slippery,; Avoid Hot Surfaces; • Keep exhaust area clear of flammable debris.
SHC-2620 / S SAFETY X7502342003 11 © 07/19 ECHO Incorporated • Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage can be pre...
Page 13 - An Emission Control Label; is
SHC-2620 / S EMISSION CONTROL X7502342003 13 © 07/19 ECHO Incorporated EMISSION CONTROL (EXHAUST & EVAPORATIVE) CARB And EPA Emissions Control Information The emission control system for the engine is EM (engine modification) and, if the second to last character of the Engine Family on the Emiss...
Page 14 - DESCRIPTION; POWER HEAD
DESCRIPTION SHC-2620 / S 14 X7502342003 © 07/19 ECHO Incorporated DESCRIPTION Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. Safety label ...
Page 16 - CONTENTS; Power Head / Drive Shaft Assembly
CONTENTS SHC-2620 / S 16 X7502342003 © 07/19 ECHO Incorporated CONTENTS The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or E...
Page 17 - ASSEMBLY; Gear Housing Assembly and Drive Shaft; Note: Hedge Trimmer Blades are sharp, wear gloves to protect
SHC-2620 / S ASSEMBLY X7502342003 17 © 07/19 ECHO Incorporated ASSEMBLY Gear Housing Assembly and Drive Shaft Note: Hedge Trimmer Blades are sharp, wear gloves to protect hands. 1. Remove locating bolt (A) and loosen clamping bolt (B). 2. Remove vinyl cap from drive shaft if necessary. 3. Align loca...
Page 18 - OPERATION; Fuel
OPERATION SHC-2620 / S 18 X7502342003 © 07/19 ECHO Incorporated OPERATION Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete stop ...
Page 19 - Gasoline; approved. Use of ECHO branded fuel is; Two Stroke Oil
SHC-2620 / S OPERATION X7502342003 19 © 07/19 ECHO Incorporated Fuel Requirements Gasoline - Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be good quality. Gasoline may contain up to 10% Ethanol (grain alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline containing methanol (...
Page 20 - DO NOT smoke near fuel.; Mixing Instructions
OPERATION SHC-2620 / S 20 X7502342003 © 07/19 ECHO Incorporated ◆ Use an approved fuel container. Mark fuel containers as containing 2-stroke mixture fuel. ◆ DO NOT smoke near fuel. ◆ DO NOT allow flames or sparks near fuel. ◆ Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly all...
Page 21 - Storage; - Fuel storage laws vary by locality. Contact your local government; Starting Cold Engine; Note: The blade cover is used for transportation and storage.
SHC-2620 / S OPERATION X7502342003 21 © 07/19 ECHO Incorporated Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, away from spa...
Page 22 - Stop Switch; Note: If engine does not start with choke in “Run” position after five
OPERATION SHC-2620 / S 22 X7502342003 © 07/19 ECHO Incorporated 1. Stop Switch Move stop switch (A) away from the STOP position. 2. Choke Move choke (B) to Cold Start (closed) position. 3. Purge Bulb Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump ...
Page 23 - Throttle Trigger; Starting Warm Engine
SHC-2620 / S OPERATION X7502342003 23 © 07/19 ECHO Incorporated The blades must not move at idle, otherwise serious personal injury may result. Periodic carburetor adjustment may be necessary to assure blades do not move at idle. If blades move, readjust carburetor according to “Carburetor Adjustmen...
Page 24 - Purge Bulb; Note: If engine does not start after five pulls, use Cold Start; Stopping Engine; Throttle
OPERATION SHC-2620 / S 24 X7502342003 © 07/19 ECHO Incorporated 2. Purge Bulb Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional four or five times. 3. Recoil Starter Lay the unit on a flat area and keep movable attachment parts cle...
Page 26 - MAINTENANCE; Skill Levels; Level 1; = Moderate difficulty. Some specialized tools may be required.; Level 3; or
MAINTENANCE SHC-2620 / S 26 X7502342003 © 07/19 ECHO Incorporated MAINTENANCE Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects away from all openings. Always stop engine, disconnect spark plug, and make sure all moving parts have come to a complete s...
Page 29 - Pull the fuel filter from the tank.
SHC-2620 / S MAINTENANCE X7502342003 29 © 07/19 ECHO Incorporated Assure air filter is assembled with pleats oriented vertically. Fuel Filter Level 1. Fuel is VERY flammable. Use extreme care when mixing, storing or handling, or serious personal injury may result. 1. Use a clean rag to remove loose ...
Page 30 - Install the new filter with the reverse action.; Spark Plug
MAINTENANCE SHC-2620 / S 30 X7502342003 © 07/19 ECHO Incorporated 4. Install the new filter with the reverse action. Note: Federal EPA regulations require all model year 2012 and later gasoline powered engines produced for sale in the United States to be equipped with a special low permeation fuel s...
Page 31 - • Air intakes are blocked,; DO NOT use a metal scraper to remove dirt from the cylinder fins.
SHC-2620 / S MAINTENANCE X7502342003 31 © 07/19 ECHO Incorporated To maintain proper engine operating temperatures, cooling air must pass freely through the cylinder fin area. This flow of air carries combustion heat away from the engine. Overheating and engine seizure can occur when: • Air intakes ...
Page 32 - Spark Arrestor Screen; Parts Required: Spark Arrestor Screen, Gasket; Note: When cleaning carbon deposit, be careful not to damage the; Assemble components in reverse order.; Exhaust Port Cleaning
MAINTENANCE SHC-2620 / S 32 X7502342003 © 07/19 ECHO Incorporated 4. Use brush to remove dirt from the cylinder fins. 5. Remove grass and leaves from the grid (C) between the recoil starter and fuel tank. 6. Assemble components in reverse order. Exhaust System Spark Arrestor Screen Level 2. Parts Re...
Page 33 - Inspect heat shield, and replace if damaged.; Carburetor Adjustment
SHC-2620 / S MAINTENANCE X7502342003 33 © 07/19 ECHO Incorporated 1. Remove spark plug lead from spark plug, and remove muffler cover. 2. Place piston at top dead center. Remove muffler (A) and heat shield (B). 3. Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port (C). ...
Page 34 - High Altitude Operation; Note: Every unit is run at the factory and the carburetor is set in; Lubrication; Blades
MAINTENANCE SHC-2620 / S 34 X7502342003 © 07/19 ECHO Incorporated Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabi...
Page 35 - Gear Case; A grease gun with lithium based grease.
SHC-2620 / S MAINTENANCE X7502342003 35 © 07/19 ECHO Incorporated Hedge Trimmer blades are very sharp. Touching them may lead to severe personal injury. Avoid touching blades whenever possible, and always wear gloves to protect hands. 1. Brush loose debris from blade and coat both sides of blade wit...
Page 36 - Install the gear housing assembly.; Sharpening; If a power grinder is used DO NOT allow blade to over heat.; SHC
MAINTENANCE SHC-2620 / S 36 X7502342003 © 07/19 ECHO Incorporated 1. Remove gear housing locating screw (A) and loosen clamping screw (B). Remove the gear housing assembly from the drive shaft housing. 2. Pull the drive shaft (C) from the housing, wipe clean, then apply 15 ml (0.5 oz.) of grease. 3....
Page 37 - Disconnect spark plug wire.; Adjustment; Tighten blade screws securely.
SHC-2620 / S MAINTENANCE X7502342003 37 © 07/19 ECHO Incorporated 1. Move stop switch to STOP position. 2. Disconnect spark plug wire. 3. Remove blade guard. 4. Slide blades to allow file clearance using slots (A) on bottom of blade. Do not pry against cutting edges. 5. File each edge carefully. Fol...
Page 38 - TROUBLESHOOTING
TROUBLESHOOTING SHC-2620 / S 38 X7502342003 © 07/19 ECHO Incorporated TROUBLESHOOTING ENGINE PROBLEM TROUBLESHOOTING CHART Problem Check Status Cause Remedy Engine starts hard or Enginedoes not start Fuel at carburetor No fuel at carburetor Fuel strainer or fuel line obstructed Clean or replace See ...
Page 39 - STORAGE; See your dealer
SHC-2620 / S STORAGE X7502342003 39 © 07/19 ECHO Incorporated Fuel vapors are extremely flammable and may cause fire and/or explosion. Never test for ignition spark by grounding spark plug near cylinder plug hole, otherwise serious personal injury may result. STORAGE The muffler and surrounding cove...
Page 40 - SPECIFICATIONS
SPECIFICATIONS SHC-2620 / S 40 X7502342003 © 07/19 ECHO Incorporated Long Term Storage (Over 30 Days) Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following: 1. Store unit in a dry, dust free place, out...
Page 42 - PRODUCT REGISTRATION; Thank you for choosing ECHO Power Equipment; FAST
PRODUCT REGISTRATION SHC-2620 / S 42 X7502342003 © 07/19 ECHO Incorporated PRODUCT REGISTRATION Thank you for choosing ECHO Power Equipment Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY ! NOTE: your information will never be...
Page 44 - ECHO INCORPORATED
ECHO INCORPORATED 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com T95515001001-T95515999999U28515001001-U28515999999
