Dewalt DW777- User Manual

Page 8 - E N G L I S H; D W 7 7 1 , D W 7 7 7 C R O S S - C U T M I T R E S AW; Technical data; Defi nitions: Safety Guidelines

E N G L I S H 6 D W 7 7 1 , D W 7 7 7 C R O S S - C U T M I T R E S AW Congratulations! You have chosen a D E WALT tool. Years of experience, thorough product development and innovation make D E WALT one of the most reliable partners for professional power tool users. Technical data DW771 DW777 Volt...

Page 9 - Safety instructions; SAVE THIS MANUAL FOR FUTURE REFERENCE; General Safety Rules

E N G L I S H 7 Safety instructions WARNING! When using electric tools basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury including the following. Read all these instructions before attempting to operate this product and save these instr...

Page 10 - Residual risks

E N G L I S H 8 • Consider applying specially designed noise-reduction blades. • Do not use HSS blades. • Do not use cracked or damaged saw blades. • Do not use any abrasive discs. • Never use your saw without the kerf plate. • Raise the blade from the kerf in the workpiece prior to releasing the sw...

Page 11 - Electrical safety; Using an extension cable; Voltage drops

E N G L I S H 9 pp. Roller table qq. Dust extraction tubes rr. Three-way connector Electrical safety The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate. Your tool is double insulated in accordance with EN 61029...

Page 12 - ADJUSTMENTS

E N G L I S H 10 where the mounting screw holes are located. Clamping at any other point will interfere with the proper operation of the saw. 3. To prevent binding and inaccuracy, be sure the mounting surface is not warped or otherwise uneven. If the saw rocks on the surface, place a thin piece of m...

Page 13 - Instructions for use

E N G L I S H 11 Instructions for use WARNING: Always observe the safety instructions and applicable regulations. The attention of UK users is drawn to the “woodworking machines regulations 1974” and any subsequent amendments. Prior to operation WARNING: • Install the appropriate saw blade. Do not u...

Page 14 - MAINTENANCE

E N G L I S H 12 WARNING: If the cutting angle varies from cut to cut, check that the bevel clamp handle and the mitre clamping knob are securely tightened. These must be tightened after making any changes in bevel or mitre. • The chart shown below will assist you in selecting the proper bevel and m...

Page 15 - Optional accessories; Protecting the environment

E N G L I S H 13 WARNING: To reduce the risk of injury, regularly clean the dust collection system. Optional accessories WARNING: Since accessories, other than those offered by D E WALT, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the ...

Page 16 - Merkez Servis

Belgique et Luxembourg Black & Decker - D E WALT Tel: +32 (0)015 - 15 47 9211 België en Luxemburg Nieuwlandlaan 7, IZ Aarschot B156 Fax: +32 (0)015 - 15 47 9210 B-3200 Aarschot www.dewalt.be Danmark D E WALT Tlf: 70201511 Sluseholmen 2-4 Fax: 70224910 2450 København SV www.dewalt.dk Deutschland ...

Table of Contents:

Summary

Other Dewalt Models