Dewalt DW708- Manual

Page 3 - Before returning this product call; WALT; IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR DEWALT PURCHASE,; IN MOST CASES, A DEWALT REPRESENTIVE CAN RESOLVE YOUR; See our catalog on the World Wide Web at www.dewalt.com

INSTRUCTION MANUALGUIDE D'UTILISATIONMANUAL DE INSTRUCCIONES DW708 Sliding Compound Miter SawDW708 Scie à onglets mixtes coulissantsDW708 Sierra de ángulo compuesto (ingleteadora) corrediza INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DEGARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES D...

Page 4 - English; WALT... BUILT JOBSITE TOUGH

English D E WALT… BUILT JOBSITE TOUGH D E WALT high performance industrial tools are made for America’s toughest industrial and construction applications. The design of every tool in the line– from drills, to sanders, to grinders – is the result of rigorous use on jobsitesand throughout the industry...

Page 5 - TABLE OF CONTENTS

SAFETY INSTRUCTIONS ...................................................................................................2 ADDITIONAL SAFETY RULES............................................................................................2 DOUBLE INSULATION/POLARIZED PLUG ................................

Page 6 - Minimum Gage for Cord Sets; AWG

English 2 Important Safety Instructions for all tools. WARNING: For your own safety read instruction manual before operating sliding compound miter saw. WARNING: When using electric tools, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury,...

Page 10 - CAUTION: To prevent binding and inaccuracy, be sure; Transporting the Saw

6 Descript. Teeth of Cut Fine Trim Precision 60-100 Very Molding Ground Smooth Carbide SplinterFree Trim, Framing, Combination 32-60 Smooth Pressure Multi-Purpose Fast Cut Treated DeckingAluminum Non-Ferrous 60-80 — Metal CuttingNegative Rake Teeth Stabilizer Your saw includes one base stabilizer. T...

Page 14 - CORRECT

10 MAKE DRY RUNS (UNPOWERED) BEFORE FINISH CUTSSO THAT YOU CAN CHECK THE PATH OF THE BLADE.DO NOT CROSS HANDS.Keep both feet firmly on the floor and maintain properbalance. As you move the miter arm left and right, follow itand stand slightly to the side of the saw blade. Sight throughthe guard louv...

Page 18 - molding with 52° and 38° angles.; BEVEL

TABLE 1 COMPOUND MITER CUT (POSITION WOOD WITH BROAD FLAT SIDE ON THE TABLE AND THE NARROW EDGE AGAINST THE FENCE) SET THIS MITER ANGLE ON SAW ANGLE OF SIDE OF BOX (ANGLE A) SQUARE BOX 6-SIDED BOX MITER DEGREE SETTING BEVEL DEGREE SETTING SET THIS BEVEL ANGLE ON SAW INSTRUCTIONS FOR CUTTING CROWN MO...

Page 19 - UNPLUG THE SLIDING COMPOUND MITER SAW; Removing and Replacing Belt

Special Cuts NEVER MAKE ANY CUT UNLESS THE MATERIAL ISSECURED ON THE TABLE AND AGAINST THE FENCE.Aluminum Cutting:Certain workpieces, due to their size, shape or surfacefinish, may require the use of a clamp or fixture to preventmovement during the cut. Position the material so that youwill be cutti...

Page 20 - 0 DAY NO RISK SATISFACTION GUARANTEE

16 English To adjust the tension, loosen, but do not remove, the sixscrews (Figure 39). Then rotate the set screw on the top ofthe motor plate casting until the proper tension is achieved.Tighten the six screws securely and replace the belt cover.NOTE: Overtightening the belt will cause premature mo...

Table of Contents:

Other Manuals for Dewalt DW708

Summary

Other Dewalt Models