Desa PF-4305 - Manual
Desa PF-4305 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING: Turn power off at circuit; DISASSEMBLE LIGHT FIXTURE
- Page 3 – Recommended Grounding Method; Other Wiring Options; Contact a qualified
- Page 4 – TESTING; Turn on the circuit breaker and light switch.; Note: Sensor has a 1; Maximum Range; If the dual controlled wiring is not done; INSTALL FIXTURE BASE TO; SENSITIVITY
- Page 5 – SPECIFICATIONS
- Page 6 – TROUBLESHOOTING GUIDE; If the problem persists, call* for assistance at; No Service Parts Available for this Product; THREE YEAR LIMITED WARRANTY
- Page 7 – control con un interruptor.; Prueba; Hasta el; TEST
- Page 8 – DESARME EL APARATO DE LUZ; INSTALE EL SOPORTE UNIVERSAL; ADVERTENCIA: Desconecte la energía en; CABLEADO DEL APARATO DE LUZ
- Page 9 – Otras opciones de cableado; Póngase
- Page 10 – PRUEBA; Si el cableado; INSTALE LA BASE DEL APARATO A; Alcance Máximo
- Page 11 – Lo menos sensible Lo más sensible; ESPECIFICACIONES
- Page 12 – GARANTÍA LIMITADA A 3 AÑOS; SERVICIO TÉCNICO; No hay piezas de servicio disponibles para este producto.; GUIA DE INVESTIGACION DE AVERIAS
FEATURES
• Light comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight
hours.
REQUIREMENTS
• The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control must
be wired through a switch.
•
Some electrical codes require installation by
a qualified electrician.
Motion Sensing
Porch Light
This package includes:
• Porch Light
• Easy to use Universal Mounting Bracket
• Mounting Hardware
• Wire Nuts
• Lens Shield
PF-4305
© 2006 DESA Specialty Products™
598-1168-03
Mode:
On-Time
Works: Day Night
Test
5 Sec
x
x
Auto
1, 5, or 10 min
x
Manual
Until Dawn*
x
OPERATION
Note: When first turned on wait about 1
1
/
2
minutes
for the circuitry to calibrate.
* resets to Auto Mode at dawn.
ON-TIME
Set the ON-TIME switch
on the sensor to TEST.
TEST
1 5 10 MIN
TEST
Set ON-TIME switch to
1, 5, or 10 minutes.
AUTO
ON-TIME Switch at 1, 5, or
10 minutes
... back on.
1 Second OFF
then...
Manual mode only works at
night because daylight returns
the sensor to AUTO.
Flip the light switch off for one
second then back on to toggle
between AUTO and MANUAL
MODE.
Manual mode works only with
the ON-TIME switch in the 1, 5,
or 10 position.
MODE SWITCHING SUMMARY
Flip light switch off
for one second then
back on*
* If you get confused while switching modes, turn the
power off for one minute, then back on. After the cali-
bration time the control will be in the AUTO mode.
MANUAL MODE
AUTO
TEST
MANUAL MODE
ON-TIME
TEST
1 5 10 MIN
Before installation, record the model number
listed inside the fixture. Attach receipt in case
of possible warranty issues.
Model Number:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1168-03 LO - M - HI SENS ITIVITY ON- TIM E TE ST 1 5 10 MIN LO - M - H I SE NS ITIV ITY ON- TIM E TEST 1 5 10 MIN INSTALL UNIVERSAL MOUNTING BRACKET For best performance, mount the fixture at least 8 feet (2.4 m) above the ground. WARNING: Turn power off at circuit breaker. 1. Tighten the two fi...
3 598-1168-03 White to White Black to Black One Motion Sensing Light Two Motion Sensing Lights (Working Independently) Black to Black White to White Ground to Ground Black to Black White to White Ground to Ground Metal Junction Box Ground Screw Recommended Grounding Method Pigtail (not supplied) Fix...
4 598-1168-03 TESTING 1. Turn on the circuit breaker and light switch. Note: Sensor has a 1 1 / 2 minute warm up period before it will detect motion. When first turned on wait 1 1 / 2 minutes. 2. Set the SENSITIVITY switch to the “M” position and the ON-TIME switch to the TEST position. Maximum Range...
