Page 3 - PRODUCT LABEL; codes and specifications:
3 3 Dear Customer, Thank you for having purchased and given your preference to our product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance. Please...
Page 4 - IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS; professionally qualified technician.; This film must be removed before using the; IMPORTANT: The use of suitable protective clothing/gloves is
4 4 IMPORTANT SAFETY PRECAUTIONS AND RECOMMENDATIONS IMPORTANT: This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment. The appliance guarantee w...
Page 5 - After use, ensure that the controls are in the off position.
5 5 • Do not attempt to modify the technical characteristics of the appliance as this may become dangerous to use. The manufacturer declines all responsibility for any inconvenience resulting from the inobservance of this condition. • Do not operate your appliance by means of an external timer or se...
Page 10 - INSTALLATION; personal injury of damage.; handling or installing this appliance.
10 10 INSTALLATION 1 IMPORTANT: • The appliance is designed and approved for domestic use only and should not be installed in a commercial, semi commercial or communal environment. Your product will not be guaranteed if installed in any of the above environments and could affect any third party or p...
Page 11 - STANDARD INSTALLATION; Description; or
11 11 FLUSH INSTALLATION (MODELS WITHOUT METAL TRIM/S ONLY) If you wish to install the hob flush with the work surface, it is neccessary to execute/carry out a miling in the hole of the cut-out as indicated in fig. 1.1b. STANDARD INSTALLATION Measures (mm) Description A (*) B (*) C (**) D D1 E E1 90...
Page 12 - FITTING REQUIREMENTS
12 12 FITTING REQUIREMENTS This cooktop can be built into a working surface from 20 mm thick and 600 mm deep. In order to install the ceramic hob into the kitchen fixture, a hole with the dimensions shown in figures 1.1a or 1.1b has to be made, keeping in consideration the following: • The cooktop s...
Page 13 - Oven with
13 13 min 5 mm min 30 mm min 25 mm min 5 mm min 30 mm min 25 mm Minimum clearances and ventilation requirements (oven installed below) Minimum clearances and ventilation requirements (cupboard or drawer space below) Oven with cooling fan 650 mm 500 mm 450 mm 50 mm minimum between the side of the cut...
Page 14 - FASTENING THE COOKTOP; Adhesive side
14 14 FASTENING THE COOKTOP Each cooktop is provided with an installation kit including brackets and screws for fastening the cooktop to benches from 20 mm thick. Before you install the cooktop, make sure that the work surface is square and level, and no structural members interfere with space requi...
Page 15 - ELECTRICAL SECTION; ELECTRICAL REQUIREMENTS; and following the appropriate safety regulations.; multiple power points as these may overheat and catch fire.; VOLTAGE AND POWER CONSUMPTION
15 15 ELECTRICAL SECTION 2 IMPORTANT: Installation must be carried out according to the manufacturer’s instructions. Incorrect installation may cause harm and damage to people, animals or property, for which the manufacturer accepts no responsibility.Before carrying out any work on the electrical se...
Page 16 - A B; MODELS SUPPLIED WITH POWER CORD ALREADY FITTED TO THE APPLIANCE; according to the local regulations in force.
16 16 220 - 240 V ac L N PE 380 - 415 V 2N ac 380 - 415 V 3N ac L 1 L 2 N PE L 1 L 3 L 2 N PE Fig. 2.3 1 2 1 2 A B B C E D Fig. 2.1 Fig. 2.2 MODELS SUPPLIED WITH POWER CORD ALREADY FITTED TO THE APPLIANCE • Connection to the electric power supply must be carried out by a qualified technician accordi...
Page 17 - agent or a similarly qualified person in order to avoid a hazard.; ELECTRIC DIAGRAM; Main power board; UI; User interface; TB; Terminal block
17 17 ATTENTION! All the operations/electrical connections must be carried out by a qualified technician. CAUTION! Do not pierce or weld the terminal ends of the wires. This is strictly forbidden! CAUTION! Do not connect the power cord to the electrical power supply without the metallic terminals co...
Page 19 - User guide
Page 20 - FEATURES AND TECHNICAL DATA; “Bridge” function: when enabled, the
20 20 FEATURES AND TECHNICAL DATA 1 Fig. 1.1 1. Induction cooking zone 190 x 210 mm Normal Power: 2100 W Booster Power: 2300 W Double Booster: 3000 W “Bridge” function: when enabled, the cooking zones work together as a single zone - 3700 W. 2. Induction cooking zone Ø 250 mm Normal Power: 2300 W Bo...
Page 21 - TOUCH CONTROLS; hob surface since they can get hot.
21 21 1 1 1 1 2 3 TOUCH CONTROLS 1. ON/OFF key 2. Setting selector 3. Pause function key 4. Child lock selection key 5. Chef cook function key 6. Warming function key 7. Automatic cooking (timer) display and keys 8. Selection zone key (one for each zone) 9. Timer key (one for each zone) Notes: • Eac...
Page 22 - USE OF INDUCTION HOB; INDUCTION COOKING SYSTEM; loss between the induction hob and the food.
22 22 The ceramic hob is fitted with induction cooking zones. These zones, shown by painted disks on the ceramic surface, are controlled by a touch control system.In the front central area of the hob, the displays of the touch control system indicate: USE OF INDUCTION HOB 2 = Cooking zone Off (not a...
Page 23 - zone switches Off automatically.; REMAINING HEAT INDICATORS; POWER IGNITION AND ADJUSTMENT OF A; COOKWARE/COFFEE POT FOR INDUCTION COOKING; To check if a pan/coffee pot is suitable or not:; Induction cooking zone; Cooking zones Bridged
23 23 If the pan detection symbol appears on the display, your pan is not suitable and your induction hob will not operate. After 10 minutes without detecting any pan, the cooking zone switches Off automatically. If the induction cooktop emits a humming noise when a zone is used on a high power leve...
Page 24 - Always use pans/coffee pots with thick, completely flat bottom.
24 24 IMPORTANT: Some cookware available on the market has an effective ferromagnetic area which is much smaller than the diameter of the pan itself. Avoid using this cookware because the induction cooktop may not function properly or may be damaged. Pay attention: The pan/coffee pot shall always be...
Page 25 - HOW TO SWITCH ON/OFF THE COOKTOP; Switching ON; Auto switch-Off: If a cooking zone is; Switching OFF; The cooktop may be switched Off at any time by pressing the key; POWER IGNITION AND ADJUSTMENT OF A COOKING ZONE; The power level can be modified at any time.; Increase
25 25 HOW TO SWITCH ON/OFF THE COOKTOP Switching ON Touch the key until the touch control system is lit (fig. 2.1). The displays of the cooking zones read “ 0 . ” or “ . ” (depending if a pan is placed or not on the relative zone). Notes: • If the safety Child Lock Safety or Key Lock Safety is activ...
Page 26 - “FAST HEATING” FUNCTION; To activate the “Fast Heating” function:; Power level of
26 26 GENTLEHEAT LOW SETTING (WARMING/MELTING) This function is ideal for the most delicate cooking tasks (such as melting chocolate), as the cooking zone will provide a very low continuous gentle heat. It is also ideal for keeping cooked food warm and the gentle warming of delicate foods.To turn On...
Page 27 - “FULL BRIDGE” FUNCTION (EXTENDABLE MAXI ZONE); Select the power level [from “; Note: It is not possible to activate the Double Booster function.
27 27 “FULL BRIDGE” FUNCTION (EXTENDABLE MAXI ZONE) This function can be used to link the two zones (only for induction cooking zone 160 x 180 mm) in “Bridge” mode, to create an extended maxi zone which is ideal for large rectangular pans or specialist fish cookware.To enable this function: • Switch...
Page 28 - BOOSTER FUNCTION; To activate the “Booster” function:
28 28 BOOSTER FUNCTION This function allows the cooking zone to operate at the “Booster” maximum power (above the nominal power) for maximum 5 minutes; it could be used, for example, to rapidly heat up large amount of water. To activate the “Booster” function: • T he touch control must be switched O...
Page 29 - available because the hob is set at a too low maximum power level).; To activate the “Chef Cook” function press the key; DOUBLE BOOSTER FUNCTION; To activate the “Double Booster” function:; “Bridge” function is operating.
29 29 “CHEF COOK” FUNCTION (if this function is not displayed, it means that it is not available because the hob is set at a too low maximum power level). This function allows the zone to be ready to use at preset power levels for a maximum of 2 hours. This means that, once selecting the “Chef Cook”...
Page 31 - switched Off after a maximum preset; POWER LEVEL OF
31 31 OPERATION TIME LIMIT OF THE COOKING ZONES Each cooking zone is automatically switched Off after a maximum preset time if no operation is performed. The maximum preset time limit depends on the set power level, as illustrated in this schedule. Each operation on the cooking hob by using the touc...
Page 36 - USER MENU; To access the User Menu:
36 36 USER MENU With the user menu it is possible to customize some features as described in table 9.1. To access the User Menu: • Switch On the cooktop by touching the key . • Touch the key again and keep it pressed until the symbol starts blinking. • Touch the key and keeping it pressed touch, one...
Page 38 - MAXIMUM POWER MANAGEMENT; carry out any modification.; POWER MANAGEMENT WHEN USING THE COOKTOP; automatically displaying the new power level.
38 38 MAXIMUM POWER MANAGEMENT Depending on the specific market requirements, the product is supplied with a maximum power (factory setting) as indicated on the rating label (see possible options in table below). The maximum power can be modified in any time (100W steps) by accessing the User Menu, ...
Page 39 - Erxx; Switch Off the cooktop and disconnect it from the mains.; ERROR CODES ON THE DISPLAYS OF THE COOKING ZONES
39 39 Error code What to do Erxx or display not operative 1. Switch Off the cooktop and disconnect it from the mains. 2. Wait for about 1 minute, then reconnect the cooktop and turn on the cooking zones. 3. Wait for about 1 minute and if the error message does not appear again the cooking zones can ...
Page 40 - SAFETY HINTS; • Do not use the hob if the glass
40 40 SAFETY HINTS • Before switching on make sure that you have the correct cooking zone for the hotplate chosen. It is advisable to put the pan on the hotplate before switching on and to take it away after switching off. • Use correct cookware suitable for induction cooking (normally identified by...
Page 41 - CLEANING AND MAINTENANCE; GENERAL ADVICE; and disconnected from the electrical power supply.; It is advisable to clean when the appliance is cold.; handling or cleaning of this appliance.; which could cause irreparable surface damage.; and may contain sharp or rough edges, that may cause injury.
41 41 CLEANING AND MAINTENANCE 3 GENERAL ADVICE • Before you begin cleaning, you must ensure that the appliance is switched off and disconnected from the electrical power supply. • It is advisable to clean when the appliance is cold. • Avoid leaving alkaline or acidic substances (lemon juice, vinega...
Page 42 - CLEANING THE CERAMIC HOB
42 42 CLEANING THE CERAMIC HOB • Remove spillages and other types of incrustations. • Dust or food particles can be removed with a damp cloth. • If you use a detergent, please make sure that it is not abrasive or scouring. Abrasive or scouring powders can damage the glass surface of the hob. • All t...
Page 43 - SERVICE AND MAINTENANCE; Servicing the appliance:; Both the fuse and the mains fuse are intact.
43 43 SERVICE AND MAINTENANCE Servicing the appliance: Service may be obtained by contacting our Customer Service Centre to locate the nearest Authorised ELBA APPLIANCES Service Agent shared services with Fisher and Paykel Australia PTY LTD (ELBA Appliances AUS, a division of F&P AUS PTY LTD).: ...
Page 44 - w w w. d e l o n g h i c o o k i n g a p p l i a n c e s . c o m . a u
C o d . 11 0 6 3 3 7 - ß 1 D e s c r i p t i o n s a n d i l l u s t r a t i o n s i n t h i s b o o k l e t a r e g i v e n a s s i m p l y i n d i c a t i v e . T h e m a n u f a c t u r e r r e s e r v e s t h e r i g h t , c o n s i d e r i n g t h e c h a r a c t e r i s t i c s o f t h e m o d...
