Page 3 - CONTENTS; Bluetooth
CONTENTS REFERENCES ............................................................................................. v Conventions .................................................................................................. v Reference Documentation ..................................................
Page 5 - REFERENCES; CONVENTIONS; and click on the links indicated for further; PRODUCTS; and; Datalogic Services; Warranty Extensions and Maintenance Agreements; Authorised Repair Centres; E-mail form and listing of Datalogic Subsidiaries
REFERENCES CONVENTIONS This manual uses the following conventions: “User” refers to anyone using a Datalogic Jet™ PDA. “PDA” and " Datalogic Jet™" refer to Datalogic Jet™ PDA. “You” refers to the System Administrator or Technical Support person using this manual to install, configure, operat...
Page 6 - SAFETY REGULATIONS; GENERAL SAFETY RULES; Do not submerge the Datalogic JetTM PDA in liquid products.; BLUETOOTH
SAFETY REGULATIONS NOTE Read this manual carefully before performing any type of connection to the Datalogic Jet™ PDA. The user is responsible for any damages caused by incorrect use of the equipment or by inobservance of the indication supplied in this manual. GENERAL SAFETY RULES − Use only the co...
Page 7 - LASER SAFETY; Laser output window; I D F E
LASER SAFETY The laser light is visible to the human eye and is emitted from the window indicated in the figure. This information applies to both Laser models and the Datalogic Jet™ Imager Aiming System. LASER LIGHT - DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT MAX. OUTPUT RADIATION 1.4 mW EMITTED ...
Page 8 - ENGLISH; ITALIANO
ENGLISH The following information is provided to comply with the rules imposed by international authorities and refers to the correct use of your PDA. STANDARD LASER SAFETY REGULATIONS This product conforms to the applicable requirements of both CDRH 21 CFR 1040 and EN 60825-1 at the date of manufac...
Page 9 - DEUTSCH; FRANÇAIS
DEUTSCH Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten Gebrauch vom PDA. NORM FÜR DIE LASERSICHERHEIT Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH ...
Page 10 - ESPAÑOL; LED Illuminator
ESPAÑOL Las informaciones siguientes son presentadas en conformidad con las disposiciones de las autoridades internacionales y se refieren al uso correcto del PDA. NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER Este aparato resulta conforme a las normativas vigentes de seguridad láser a la fecha de pro...
Page 11 - Information for the User; for further; eventuali restrizioni o licenze; . Ulteriori informazioni sono; d'éventuelles restrictions ou licences; renseignement vous pouvez vous adresser au site web:
The following shows the correspondence between the Datalogic Jet™ models and the Radio modules: DLBJET™ 5XX-XXX-XXX 802.11b (Wi-Fi) radio card DLBJET ™ 7XX-XXX-XXX 802.11b/g (Wi-Fi) radio card DLBJET ™ X1X-XXX-XXX GSM/GPRS Tri-band (900, 1800, 1900 MHz) module Information for the User ENGLISH Contac...
Page 13 - WEEE COMPLIANCE
WEEE COMPLIANCE Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC L’apparecchiatura che riporta il simbolo del bidone barrato deve essere smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani. Smaltire l’apparecchiatura in conformità alla presente Direttiva c...
Page 15 - GENERAL VIEW
xv GENERAL VIEW Figure A – General View A) Data capture/Laser output window B) Scan key(s) (3) C) Bluetooth® LED D) Charging status LED E) Backlit keyboard F) External power supply connector G) Communication/Charger connector H) Headset jack I) User programmable LED J) Backlit display K) Mini SD car...
Page 17 - INTRODUCTION; DATALOGIC JETTM PDA DESCRIPTION
INTRODUCTION 1 1 INTRODUCTION 1.1 DATALOGIC JET™ PDA DESCRIPTION The Datalogic Jet™, is the powerful Datalogic PDA. Thanks to the state-of the-art architecture and the most advanced technologies, it can provide the most suitable levels for capturing, computing and communicating data faster and easie...
Page 18 - MODELS
DATALOGIC JET™ 2 1 1.2 AVAILABLE MODELS The Datalogic Jet™ PDA is available in different models depending on the options it is equipped with. All options are listed below: • communication options: Wi-Fi 802.11b, Wi-Fi 802.11b/g, GSM/GPRS, Bluetooth® • capture options: laser, imager, laser + RFID • c...
Page 19 - INSERTING MINI SD CARD; additional; To access the Mini SD card slot, unscrew the cover at the side of
INTRODUCTION 3 1 1.4 INSERTING MINI SD CARD With Datalogic Jet™ PDA, it is possible to add a Mini SD Card for additional storage capacity. To access the Mini SD card slot, unscrew the cover at the side of Datalogic Jet (see Figure A) and then proceed as follows: 1. Before inserting the Mini SD card,...
Page 22 - SYSTEM
DATALOGIC JET™ 1 NOTE Use only a Datalogic Mobile-approved power supply and cables. Use of an alternative power supply will invalidate any approval given to this device and may be dangerous. 1.6 OPERATING SYSTEM Datalogic Jet™ comes in two different models, respectively supporting Windows CE and Win...
Page 23 - CONNECTIONS; PDA CONNECTION TO THE HOST COMPUTER; A Host computer; Avoid the power supply
CONNECTIONS 2 2 CONNECTIONS 2.1 PDA CONNECTION TO THE HOST COMPUTER 2.1.1 RS232/USB Direct Connection You can use a cable to connect the Datalogic Jet™ PDA to a host computer to transfer data. Key: A Host computer C RS232 cable or USB cable B Datalogic Jet™ PDA D *Power Supply (only necessary for ba...
Page 24 - models can communicate with
DATALOGIC JET™ 2 2.1.2 WLAN Connection Datalogic Jet™ Wi-Fi 802.11b and Wi-Fi 802.11b/g 1 models can communicate with the host using the on-board radio frequency module and an Access Point connected to the host computer. For models using the WiFi7 radio (7xx-xxx-xxx models), you can find information...
Page 26 - Connection; within a range of 10 m, using the on-board Bluetooth
DATALOGIC JET™ 2 2.1.3 WPAN Connection Datalogic Jet™ PDAs can communicate with a Bluetooth ® device, such as a printer, within a range of 10 m, using the on-board Bluetooth ® module. A B Key: A) Datalogic Jet™ PDA B) Bluetooth® printer NOTE In order to avoid wasting energy, the Bluetooth® module is...
Page 30 - Installing the SIM Card; SIM Card Slot
DATALOGIC JET™ 2 Installing the SIM Card To correctly insert the SIM Card, proceed as follows: 1- Turn off the Datalogic Jet™ PDA. 2- Press the latch release button and pull the battery latch down as indicated in the figures below: 3- Remove the battery pack to have access to the SIM card slot: SIM ...
Page 31 - its round corner at the bottom.
CONNECTIONS 2 4- Open the Sim Card slot by pulling up the locking plate. 5- Pull up the cardholder and insert the Sim Card with its contacts downward and its round corner at the bottom. 6- Lock the card into place by pushing the cardholder down and then pulling the locking plate down. 15
Page 32 - Removing the SIM Card
DATALOGIC JET™ 2 CAUTION Follow proper ESD precautions to avoid damaging the SIM card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded. Do not force the card. If you feel resistance, remove the card, check the orientat...
Page 33 - CABLES; Power Supply Polarity:
CONNECTIONS 2 2.2 CONNECTION CABLES The following cables are listed with their order number. RS232 Direct Connection: 94A051008 WIN-NET SERIAL CABLE (HRS 3500-16P-CV) RX TX 5 10 13 3 6 2 RTS DSR 5 8 DTR GND 9 4 Datalogic Jet™ side 16-pin 7 1 6 CTS 8 HOST/PC side 9-pin (female) 7 11 USB Direct Connec...
Page 34 - USE AND FUNCTIONING; STARTUP
DATALOGIC JET™ 3 3 USE AND FUNCTIONING The use of the Datalogic Jet™ PDA depends on the application software loaded. However there are several parameters that can be set and utilities that can be used to perform some basic functions such as data capture, communications, file management, etc. 3.1 PDA...
Page 35 - USING THE STYLUS; Tap
USE AND FUNCTIONING 3 When it is no longer used for more than a programmable timeout, which is defined in the POWER applet of the Control Panel, the PDA goes into power-off (low power with display and keyboard backlight off). In this mode it can be awakened (resuming operation) by the [ON/OFF] key. ...
Page 37 - CAPTURE
USE AND FUNCTIONING 3 3.3 DATA CAPTURE To capture data, first of all select the barcode icon on the bottom-right side of the display and tap the 'Capture' menu item, then proceed with the following directions. To configure and enable data capture parameters refer to par. 3.6. 3.3.1 Laser Data Captur...
Page 38 - Imager Data Capture; , section Datalogic JetTM
DATALOGIC JET™ 3 3.3.2 Imager Data Capture To read a 1D or 2D code, simply point the Datalogic Jet™ Imager model onto the code from a distance within the reading range (see par. 5.1 , section Datalogic Jet™ Imager Optical Features) and press one of the three SCAN Keys. The Datalogic Jet™ Imager uses...
Page 39 - Linear barcode; RFID Data Capture
USE AND FUNCTIONING 3 Linear barcode 2D Matrix symbol ÌBX3ÉÎ Relative Size and Location of Aiming System Pattern The field of view changes its size as you move the reader closer or farther away from the code. The field of view indicated by the aiming system pattern will be smaller when the Datalogic...
Page 40 - DESCRIPTION OF THE KEYS
DATALOGIC JET™ 3 3.4 DESCRIPTION OF THE KEYS The Datalogic Jet™ PDA provides a function-oriented keyboard having a total of 27 keys. The keyboard can be divided as follows: 2 Lateral SCAN keys (1 per side) General keys System Control and Navigation Keys Power Key 3.4.1 System Control and Navigation ...
Page 41 - Selection
USE AND FUNCTIONING 3 3.4.2 Key Selection The following figure shows the Datalogic Jet™ PDA keyboard: 25
Page 42 - characters positioned over the keys.
DATALOGIC JET™ 3 Some of these keys carry extra symbols and are logically divided in up to 3 sections according to the following figure: A B C Each section corresponds to a symbol that can be obtained using the corresponding keyboard method according to the following scheme: A) function of the key w...
Page 44 - Resetting the Jet; Warm Boot
DATALOGIC JET™ 3 3.4.3 Resetting the Jet Windows CE There are several reset methods for the Jet. A warm boot terminates an unresponsive application and clears the working RAM, but preserves both the file system and the registry. A cold boot forces all applications to close and clears the working RAM...
Page 45 - Cold Boot; Windows Mobile
USE AND FUNCTIONING 3 To perform a clean boot, follow these steps: 1. Perform a Cold Boot (see Cold Boot). 2. Quickly release all the keys when the screen goes black. 3. Within 1 second press and hold down the Esc and 0 keys until the left orange led starts blinking. 4. Release the Esc and 0 keys. 5...
Page 46 - Boot and proceed with a Cold Boot.
DATALOGIC JET™ 3 Cold Boot A cold boot is a complete reset of the Jet in which all applications are forcibly closed and the RAM is completely cleared. Registry is restored from persistent memory if a saved copy is available (see Registry Applet, par. 3.7.2). Applications and data stored on file syst...
Page 47 - INDICATORS; LED STATUS
USE AND FUNCTIONING 3 3.5 STATUS INDICATORS 3.5.1 LED Status The Datalogic Jet™ provides three different LEDs signaling the PDA status. LED STATUS General Purpose (left-side) Green/Red This LED is available to the application program. Bluetooth ® (extreme right -side) Blue blinking It blinks when th...
Page 48 - ICONS DESCRIPTION
DATALOGIC JET™ 3 3.5.2 Taskbar As well as tasks opened in Windows, the Taskbar provides several status icons that report information about the time, the battery level, the keyboard function, and the decoding status. ICONS DESCRIPTION Time and Battery Icons It shows the time. In Windows CE, they are ...
Page 50 - DATA CAPTURE CONFIGURATION; Info
DATALOGIC JET™ 3 3.6 DATA CAPTURE CONFIGURATION From the Windows CE Taskbar, tap the "Data Capture" icon to open a drop–down menu. Data Capture can also be accessed from the Control Panel. By selecting the Info item from this drop-down menu you can access information about the Scanner and th...
Page 52 - Reader Parameters; ScanTimeout; on without decoding any barcode.; GoodReadSound; : is the filename of a .wav file played when the scanner reads a; LedDuration; : the number of times the good-read led pulse is emitted when the
DATALOGIC JET™ 3 Selecting Data Capture Setup Parameters Alternatively using the stylus, you can tap once directly on the value on the right column; continue tapping until the desired value is reached. To activate a new configuration select the File ->Save Menu to send the new configuration to th...
Page 53 - ContinuousMode; : when enabled, the scanner can only be turned off by releasing; KeyboardEmulation; : if enabled all scanned data are transformed into keyboard; SoftTrigger; : when enabled, the laser can be turned on/off by the application; ScanAlwaysOn; : enables the scanner for barcode reading independently from the; NotPrintableChar; : if set to “Remove”, all not printable characters included in the
USE AND FUNCTIONING 3 ContinuousMode : when enabled, the scanner can only be turned off by releasing the SCAN key, or if Soft Trigger is enabled, by the application program. Continuous Mode overrides Scan Timeout. KeyboardEmulation : if enabled all scanned data are transformed into keyboard events a...
Page 54 - Default Settings
DATALOGIC JET™ 3 Default Settings The following tables contain the default values for the major barcode setup parameters, according to the type of scan engine mounted on the PDA. For a complete list of parameters and of their configuration procedures, please refer to the SDK Help file on the CD. SCA...
Page 57 - PANEL
USE AND FUNCTIONING 3 3.7 CONTROL PANEL From the Windows CE Desktop, double tap on the "Control Panel" icon to open the Windows CE control panel main window. The Control Panel can also be launched from Start ->Settings ->Control Panel. APPLET programs are displayed as icons; one icon c...
Page 59 - , you need to change the
USE AND FUNCTIONING 3 Select the “Enable Multipress” check box to enable multipress text input mode. To enables F5, F6, F7, F8, F9, F10 function keys , you need to change the ORANGE key mapping. Select the “F5-F10” check box: Windows CE Windows Mobile If pressed along with keys [5 jkl], [6 mno], [7 ...
Page 60 - Registry
DATALOGIC JET™ 3 3.7.2 Registry The REGISTRY ADMIN applet provides management of Windows CE/ Windows Mobile registry. From the Windows CE control panel main window, select the REGISTRY ADMIN applet by double tapping the Registry Admin icon. From the Windows Mobile Start menu, tap Settings -> Syst...
Page 61 - Admin
USE AND FUNCTIONING 3 3.7.3 Files Admin The FILES ADMIN applet enables control of the permanence of files in the Windows CE System Folder. Because Windows Mobile mounts the entire file system in persistent store (rather than using RAM), it provides both users and applications with a reliable storage...
Page 62 - installations). Make sure the installation directory
DATALOGIC JET™ 3 Two activating procedures are available for Safe Setup: - Select an installation file (for example, a .CAB cabinet file) from the Safe Setup mask. Safe Setup First Mask Then select \Windows or a relevant sub-directory in the path box. Then, Safe Setup will recognize the new files an...
Page 66 - Settings; use
DATALOGIC JET™ 3 3.7.5 Ethernet Settings Windows CE Ethernet cradle Datalogic Jet™ can be connected to an Ethernet network by inserting it into the Datalogic Jet™ Ethernet Multi Cradle. NOTE If the PDA supports Windows CE, ethernet communication requires Datalogic Jet™ SW version 5.41 or later. Veri...
Page 67 - LAN icon; Windows Mobile Ethernet Cradle
USE AND FUNCTIONING 3 The LAN icon will appear on the Taskbar indicating the LAN connection status. By double tapping on the LAN icon in the Taskbar, the LANNDS1 applet allows visualizing the TCP/IP information. Other information such as the MAC Address is available by tapping the Details... button....
Page 69 - tab: allows setting the volume for each audio profile
USE AND FUNCTIONING 3 3.7.6 Volume Settings From the Windows CE control panel main window, select the VOLUME SETTINGS applet by double tapping the Volume Settings icon. From the Windows Mobile Start Menu, tap Settings -> System -> Volume Settings. Select the VOLUME SETTINGS applet by tapping t...
Page 70 - GSM; available when using the cradle loudspeaker (in this case; Input Tab; It allows setting the microphone recording volume:
DATALOGIC JET™ 3 - GSM : it is automatically activated each time a phone-call is started. It is not available when using the cradle loudspeaker (in this case Current Profile = Cradle). Output Tab It allows setting the volume for each audio profile: The “Master Volume” slider allows setting the volum...
Page 71 - Cradle Tab
USE AND FUNCTIONING 3 Cradle Tab It allows selecting the cradle type and managing the vehicle cradle headset functioning: Two radio buttons allow selecting the type of cradle to be used. Check the “Cradle desk, AC plug or none” radio button, if using a cradle different from the vehicle cradle or an ...
Page 73 - USB; By default, ActiveSync
USE AND FUNCTIONING 3 3.8 WINDOWS CONNECTIONS To connect the PDA to another device (i.e. Host PC) from Windows, several programs are available in the "Connections" folder on the Datalogic Jet™ Desktop. These programs require specific electrical connections in order to function properly. From...
Page 74 - ActiveSync® Remote; Microsoft® ActiveSync
DATALOGIC JET™ 3 NOTE In Windows Mobile before using the ActiveSync follow the directions described in 2.1.1 NOTE Visit the following Microsoft Web site for the latest in updates and technical information: http://www.microsoft.com/windowsmobile/activesync/default.mspx ActiveSync® Remote NOTE Microso...
Page 75 - Bluetooth® Manager Device Setup; device for communication with the Datalogic JetTM
USE AND FUNCTIONING 3 3.8.2 Bluetooth® Manager Device Setup Windows CE Bluetooth® Manager Device Setup In order to enable a Bluetooth ® device for communication with the Datalogic Jet™ PDA you must perform the discovery procedure and enable the device as follows: 1. Place the Bluetooth ® device with...
Page 78 - Windows Mobile Bluetooth® Manager Device Setup
DATALOGIC JET™ 3 Windows Mobile Bluetooth® Manager Device Setup Before turning on Bluetooth®, ensure that the two devices are within close range and that both Bluetooth-enabled devices are discoverable. 1. Tap Start -> Settings -> Connections tab. 2. Tap Bluetooth > Mode 3. Select or clear ...
Page 81 - visible to other devices” check box:
USE AND FUNCTIONING 3 Other devices with Bluetooth® capabilities can detect your device and attempt to beam information to it, establish a partnership, or use a Bluetooth® service. To make a device discoverable: 1. Tap Start -> Settings -> Connections tab. 2. Tap Bluetooth > Mode Tab. 3. Se...
Page 82 - device that is beaming the information.
DATALOGIC JET™ 3 If you no longer want your device to be discoverable, clear the “Make this device visible to other devices” check box. Your device will not detect and notify you of incoming Bluetooth® beams unless you set it up to do this. To receive a Bluetooth® beam: 1. Tap Start -> Settings -...
Page 84 - FTP Server Setup; WLAN; using the Wi-Fi radio; LAN; enter the Datalogic JetTM IP address.
DATALOGIC JET™ 3 3.8.3 FTP Server Setup The Datalogic Jet™ Windows CE Operating System includes a sample File Transfer Protocol (FTP) server. FTP is used for copying files to and from remote computer systems over a network using TCP/IP. You can establish a connection to your Datalogic Jet™ using its...
Page 85 - BACKUP DIRECTORY FILE MANAGEMENT
USE AND FUNCTIONING 3 3.9 BACKUP DIRECTORY FILE MANAGEMENT All of the Windows CE system files reside in RAM (volatile memory) except for the Backup directory, which resides in FLASH (non-volatile memory). Therefore the contents of the Backup directory are persistent even if the PDA is re-booted or t...
Page 86 - MAINTENANCE; CHARGING THE BATTERY PACK
DATALOGIC JET™ 4 4 MAINTENANCE NOTE Rechargeable battery packs are not initially charged. Therefore the first operation to perform is to charge them. See below. 4.1 CHARGING THE BATTERY PACK It is possible to recharge the battery pack by using the PG12-10P35 AC/DC external power supply directly conn...
Page 88 - REPLACING THE BATTERY PACK
DATALOGIC JET™ 4 4.2 REPLACING THE BATTERY PACK To correctly replace the battery pack, proceed as follows. 1. Turn off the Datalogic Jet™ PDA. 2. Press the latch release button and pull the battery latch down as indicated in the figures below: 3. Remove the battery pack. 72
Page 90 - Risk of explosion if the battery is replaced by an incorrect type.
DATALOGIC JET™ 4 WARNING Use only a Datalogic Mobile approved power supply. Use of an alternative power supply will void the product warranty and may cause product damage. Do not apply voltages to the batteries contacts. Risk of explosion if the battery is replaced by an incorrect type. Do not use t...
Page 91 - To achieve the best battery life, turn off the radios not in use.; CLEANING THE PDA
MAINTENANCE 4 NOTE In order to guarantee an adequate operating autonomy, when replacing the battery pack the PDA checks the battery energy level. If the battery is not sufficiently charged, Datalogic Jet™ does not turn on (when pressing the ON button). In this case, either substitute the battery pac...
Page 92 - DATA
DATALOGIC JET™ 5 5 TECHNICAL FEATURES 5.1 TECHNICAL DATA Datalogic Jet™ Common Features Electrical Features Power DC supply 12 to 14 V ± 5% Battery pack 2 cell Li-Ion 1070 mAh@ 7.4 V (nominal) Large capacity pack 2 cell Li-Ion 1800 mAh@ 7.4 V (nominal) Internal backup battery Rechargeable Li-Ion 30 ...
Page 95 - DIAGRAMS
TECHNICAL FEATURES 5 5.2 READING DIAGRAMS DLBJET™ HP Laser (XXX-1XX-XXX models) Reading Zones (10° skew angle) 100 200 400 200 100 0 100 200 300 500 600 700 800 mm 300 mm 300 1.00 mm( 40 mils ) 0.13 mm ( 5 mils ) 0.19 mm ( 7.5 mils ) 0.25 mm( 10 mils ) EAN 0.33 mm ( 13 mils ) 0.38 mm( 15 mils ) 0.50...
Page 96 - TEST CODES; High Density Codes; ÌtestwÎ; test
DATALOGIC JET™ 6 6 TEST CODES High Density Codes 0.25 mm (10 mils) Code 39 !17162H! 17162 2/5 Interleaved Ë"8NduÌ 0123456784 Code 128 ÌtestwÎ test 80% EAN 13 x(0B2DE5*KKKKLM( 80% EAN 8 (6450*TRMN( 80
Page 97 - Medium Density Codes
TEST CODES 6 Medium Density Codes 0.38 mm (15 mils) Code 39 !17162H! 17162 Interleaved 2/5 Ë"8NduÌ 0123456784 Code 128 ÌtestwÎ test 100% EAN 13 x(0B2DE5*KKKKLM( 100% EAN 8 (6450*TRMN( 81
Page 98 - Low Density Codes
DATALOGIC JET™ 6 Low Density Codes 0.50 mm (20 mils) Code 39 !17162H! 17162 Interleaved 2/5 Ë"8NduÌ 0123456784 Code 128 ÌtestwÎ test 120% EAN 13 x(0B2DE5*KKKKLM( 120% EAN 8 (6450*TRMN( 82
Page 99 - GLOSSARY; To recognize a bar code symbology
GLOSSARY Access Point A device that provides transparent access between Ethernet wired networks and IEEE 802.11 interoperable radio-equipped mobile units. Hand-held terminals, PDAs or other devices equipped with radio cards, communicate with wired networks using Access Points (AP). The mobile unit (...
Page 102 - INDEX; Backup Directory File Management
INDEX A Accessories; 5 Available Models; 2 B Backup Directory File Management; 69 Bluetooth Approval; vi Bluetooth® Manager Device Setup; 59 Buttons; 42 C Charging the Batteries; 70 Cleaning the PDA; 75 Connection Cables; 17 RS232 Direct Connection; 17 USB Direct Connection; 17 Connections; 7 RS232/...
Page 106 - Datalogic JetTM; User’s Manual; World wide Sales Network
Datalogic Jet™ User’s Manual ©2004-2007 Datalogic Mobile S.r.l. 822000645 (Rev. F) 11/07 www.mobile.datalogic.com Datalogic Mobile S.r.l. Via S. Vitalino, 13 40012 Lippo di Calderara di RenoBologna - ItalyTelephone: (+39) 051-3147011Fax: (+39) 051-3147561 World wide Sales Network available from: www...
