Datalogic DS4800 - Manuals - manualsarea.com

Page 2 - PRODUCTS

DS4800 QUICK GUIDE 2 UPDATES AND LANGUAGE AVAILABILITY UK/US The latest drivers and documentation updates for this product are available on Internet. Log on to: www.automation.datalogic.com I Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Questo ma...

Page 3 - STEP 1 – CONNECT THE SYSTEM

DS4800 QUICK GUIDE 3 STEP 1 – CONNECT THE SYSTEM To connect the system in a Stand Alone configuration, you need the hardware indicated in Figure 1. In this layout the data is transmitted to the Host on the main serial interface. In Local Echo communication mode, the RS232 auxiliary interface can be ...

Page 5 - STEP 2 – MOUNT AND POSITION THE SCANNER; in the figures below.; Tilt 0° and Pitch 0°; scanner should be positioned at.

DS4800 QUICK GUIDE 5 STEP 2 – MOUNT AND POSITION THE SCANNER 1. To mount the DS4800, use the mounting bracket to obtain the most suitable position for the reader as shown in the figures below. Figure 3 - Positioning with Mounting Bracket 2. When mounting the DS4800 take into consideration these thre...

Page 6 - STEP 3 – FOCUS THE SCANNER; direction clockwise (focus nearer to; NOTE

DS4800 QUICK GUIDE 6 STEP 3 – FOCUS THE SCANNER The reading distance depends on the focus distance of the scanner and should be set according to the application requirements. The Focus Position is set directly through the focus adjustment screw on the front panel of the scanner. This screw moves the...

Page 7 - STEP 4 – X-PRESSTM CONFIGURATION; AUTO LEARN; green; place

DS4800 QUICK GUIDE 7 STEP 4 – X-PRESS™ CONFIGURATION X-PRESS™ is the intuitive Human Machine Interface designed to improve ease of installation and maintenance. Status and diagnostic information are clearly presented on the display (which can be configured in various languages) and by means of the f...

Page 8 - RESET SCANNER TO FACTORY DEFAULT (OPTIONAL)

DS4800 QUICK GUIDE 8 AUTO SETUP (OPTIONAL) At the end of the Auto Learn procedure, you can perform the Auto Setup procedure to set up the reading parameters. 1. Enter the Auto Setup function by holding the X-PRESS™ push button pressed until the SETUP LED is on. 2. Release the button to enter the Aut...

Page 9 - STEP 5 – INSTALL GENIUSTM CONFIGURATION PROGRAM; Wizard approach for new users; WIZARD FOR QUICK READER SETUP; the

DS4800 QUICK GUIDE 9 STEP 5 – INSTALL GENIUS™ CONFIGURATION PROGRAM Genius ™ is a Datalogic scanner configuration tool providing several important advantages: • Wizard approach for new users; • Multi-language version; • Defined configuration directly stored in the reader; • Communication protocol in...

Page 12 - STEP 6 – TEST MODE; By default, the Test Mode exits automatically after two minutes.

DS4800 QUICK GUIDE 12 STEP 6 – TEST MODE Use a code suitable to your application to test the system. Alternatively, you can use the Datalogic Test Chart (Code 128). 1. Enter the Test mode function by holding the X-PRESS™ push button pressed until the TEST LED is on. 2. Release the button to enter th...

Page 13 - ADVANCED SCANNER CONFIGURATION; HOST MODE PROGRAMMING; ALTERNATIVE LAYOUTS

DS4800 QUICK GUIDE 13 ADVANCED SCANNER CONFIGURATION For further details on advanced product configuration, refer to the complete Reference Manual on the installation CD-ROM or downloadable from the web site through this link: www.automation.datalogic.com/ds4800 . The following are alternative or ad...

Page 14 - APPENDIX; READING DIAGRAMS

DS4800 QUICK GUIDE 14 APPENDIX READING DIAGRAMS DS4800-1000 Focus Distance 30 cm (Near) CONDITIONS Code = Code 128 PCS = 0.90 Pitch angle = 0° Skew angle = 15° Tilt angle = 0° *Scan Speed = 800 scans/sec *Reading Conditions = Standard *Reading Mode = Linear * Parameter selectable in Genius™ 0 5 15 1...

Page 17 - MECHANICAL INSTALLATION; mm

DS4800 QUICK GUIDE 17 MECHANICAL INSTALLATION M4 M4 M4 M4 81 [3.19] 87.7 [3.45] 37 [1 .46 ] 41 .9 [1 .65] 37 .8 [1.4 9] 27.9 [1 .10] 12.1 [0.48] 5.2 [0.21] M5 M5 7.5 [0.30] 34 [1.34] 10 [ 0 .39] 13 [0 .51] 10 [0 .39 ] 41.4 [1.63] M5 101 [3.98] 42 [1 .65 ] 85 [ 3. 34] Figure 11 – DS4800 Overall Dimen...

Page 18 - LASER SAFETY; POWER SUPPLY; which case the user may be required to take adequate measures.

DS4800 QUICK GUIDE 18 PATENTS This product is covered by one or more of the following patents: U.S. patents 5,992,740; 6,394,352 B1; 6,742,710 B2; 6,688,524 B1 European patents 789,315 B1; 959,426 B9 Additional patents pending. COMPLIANCE LASER SAFETY The scanner is classified as a Class 2 laser pro...