Datalogic CBX500 - Manual - manualsarea.com

Page 2 - CBX500 INSTALLATION MANUAL

CBX500 INSTALLATION MANUAL 2 Figure B Power switch (ON/OFF) 1 2 Device Chassis Grounding Selector 3 Mounting Holes (2) 5 4 I/O Extension Module Connector Backup Module Connector 6 Indicator LEDs RS485 Termination Resistance Switch 7 ID-NET™ Termination Resistance Switch 8 Auxiliary Port Connector 9 ...

Page 3 - UPDATES AND LANGUAGE AVAILABILITY; PRODUCTS

CBX500 INSTALLATION MANUAL 3 UPDATES AND LANGUAGE AVAILABILITY UK/US The latest drivers and documentation updates for this product are available on Internet. Log on to: www.automation.datalogic.com I Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Q...

Page 4 - DESCRIPTION; Name Description; SAFETY PRECAUTIONS; ATTENTION: READ THIS INFORMATION BEFORE INSTALLING THE PRODUCT; CAUTION

CBX500 INSTALLATION MANUAL 4 DESCRIPTION The CBX500 is a connection box which can be used as an accessory to facilitate system connections for installation and device replacement of several Datalogic family reading devices. System cabling is made through spring clamp terminal blocks inside the CBX50...

Page 5 - SUPPORTED READING DEVICE MODELS; NOTE

CBX500 INSTALLATION MANUAL 5 SUPPORTED READING DEVICE MODELS The CBX500 can be directly connected to the following readers through the 25-pin connector illustrated in Figure A. Linear Scanners 2D Readers DS2100N DS2400N DS4800 DS6300 MATRIX-1000 MATRIX-2000 DS6400 DX6400 DS8100A DX8200A MATRIX 400 N...

Page 6 - MECHANICAL INSTALLATION; ELECTRICAL CONNECTIONS AND SETUP

CBX500 INSTALLATION MANUAL 6 MECHANICAL INSTALLATION CBX500 can be mounted to various wooden or plastic surfaces using the two self-threading screws (3.9 x 45 mm) and washers provided in the package. Mounting to other surfaces such as concrete walls or metallic panels requires user-supplied parts (s...

Page 8 - SYSTEM WIRING

CBX500 INSTALLATION MANUAL 8 SYSTEM WIRING The connection and wiring procedure for CBX500 is described as follows: 1) Open the CBX500 by unscrewing the four cover screws. 2) Verify that the CBX500 power switch is off (see Figure 3). 3) Unscrew the compression connectors and pass all the system cable...

Page 9 - PINOUT

CBX500 INSTALLATION MANUAL 9 PINOUT Pinouts Group Name Function Vdc Power Supply Input Voltage + GND Power Supply Input Voltage - Input Power Earth Protection Earth Ground +V Power Source – External Trigger I1A External Trigger A (polarity insensitive) I1B External Trigger B (polarity insensitive) E...

Page 10 - POWER SOURCE JUMPER SETTINGS; SHIELD TO PROTECTION EARTH JUMPER SETTINGS; CHASSIS GROUNDING JUMPER SETTINGS

CBX500 INSTALLATION MANUAL 10 POWER SOURCE JUMPER SETTINGS For most applications input power is provided through the dedicated spring clamp connectors inside the CBX500. However CBX500 may accept power from the connected reading device through the 25-pin connector. This is useful, for example, to pa...

Page 11 - -PIN READING DEVICE AUXILIARY SERIAL INTERFACE; -pin Connector Pinout; NETWORK BUS TERMINATION

CBX500 INSTALLATION MANUAL 11 9-PIN READING DEVICE AUXILIARY SERIAL INTERFACE The reading device auxiliary serial interface available on the internal CBX500 9-pin connector can be used either for configuration or for data monitoring. Connections can be made to a PC or Laptop using a straight through...

Page 12 - INDICATOR LEDS; yellow

CBX500 INSTALLATION MANUAL 12 RS485 HD ON OFF Figure 11 – RS485 HD Termination Resistance Switch The RS485 HD termination resistance switch enables or disables the insertion of the bus termination resistor for RS485 Half Duplex Multidrop applications. CAUTION In Multiplexer applications the terminat...

Page 13 - TECHNICAL FEATURES; ELECTRICAL FEATURES; COMPLIANCE

CBX500 INSTALLATION MANUAL 13 TECHNICAL FEATURES ELECTRICAL FEATURES Supply Voltage 10 to 30 Vdc* Consumption 0.8 – 0.5 A Limited Current Consumption CBX + reading device consumption (see related manual) 2.5 A USER INTERFACE LED Indicators Power On/Polarity Error (blue/red) Trigger (yellow) IN2 (gre...

Page 14 - FCC COMPLIANCE

CBX500 INSTALLATION MANUAL 14 FCC COMPLIANCE Modifications or changes to this equipment without the expressed written approval of Datalogic could void the authority to use the equipment. This device complies with PART 15 of the FCC Rules. Operation is subject to the following two conditions: (1) Thi...

Page 15 - DECLARATION OF CONFORMITY

DECLARATION OF CONFORMITY 08 Datalogic Automation S.r.l. Via S. Vitalino 13 40012 - Lippo di Calderara Bologna - Italy dichiara che declares that the déclare que le bescheinigt, daß das Gerät declare que el CBX500 connection box modular; e tutti i suoi modelli and all its models et tous ses modèles ...

Datalogic CBX500 - Manual

Table of Contents:

Summary

Other Datalogic Models