Datalogic DS4600A - Manual
Datalogic DS4600A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CE
- Page 3 – 5-pin female connector
- Page 4 – Mechanical Installation:; * The quote refers to the scan line
- Page 5 – Main Serial Interface; Multiplexer layout; Main Serial Interface (Slaves RS232 only)
- Page 6 – and greater
- Page 8 – CONDITIONS
- Page 11 – RS232 PC-side connections; -pin male connector; Pin Name Pin Name; PC
DS4600A
Laser Barcode Reader
Quick Reference Guide
The scanner is classified as a Class 2 laser
product according to EN 60825-1 regulations
and as a Class II laser product according to
CDRH regulations.
For installation, use and maintenance it is not
necessary to open the device.
There is a safety device which allows the
laser to be switched on only if the motor is
rotating above the threshold for its correct
scanning speed.
The laser beam can be switched off through a
software command (see also the W inHost
Help On-Line).
AVOID EXPOSURE
LASER LIGHT IS EMITTED
FROM TH IS APERTURE
CAUTION-CLASS 3B
LASER LIGHT
WHEN OPEN
AVOID
EXPOSURE TO BEAM
Figure A
Cable with 25-pin Connector
Laser Beam Output Window
Warning Label
Mounting Holes
Accessory Mounting Holes
Data TX LED
Good Read LED
Ready LED
External Trigger LED
Warning and Classification Labels
1
2
3
4
5
6
7
10
8
9
Keypad
11
Display
12
DATALOGIC S.p.A. Via Candini, 2
40012 LIPPO DI CALDERARA (BO) ITALY
Model No.
Serial No.
Volt
Amp.
Manufactured
This product conforms to the applicable requirements of
21CFR1040 at the date of manufacture.
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
MAXIMUM OUTPUT RADIATION 1 mW
EMITTED WAVE LENGTH 630~680 nm
TO EN 60825-1 (2001)
Warning and device class labels
For further details on product installation, see the
complete Installation Manual available on the WinHost
CD included with this product.
POWER SUPPLY
- This product is intended to be installed by Qualified
Personnel only.
The laser diode used in this device is classified
as a class 3B laser product according to EN
60825-1 regulations and as a Class IIIb laser
product according to CDRH regulations. As it is
not possible to apply a classification label on
the laser diode used in this device, the
following label is reproduced below.
- Models
DS4600A-XXX0:
This device is intended to be supplied by a UL Listed
Direct Plug-in Power Unit marked “Class 2”, rated 10-30
V minimum, 0.60 A.
This device may also be supplied by a UL Listed Power
Unit marked “Class 2” or LPS power source which
supplies power directly to the scanner via the 25-pin
connector.
- Model
DS4600A-2XX5:
This device is intended to be supplied by a UL Listed
Direct Plug-in Power Unit marked “Class 2”, rated 24 V
minimum, 0.50 A.
This device may also be supplied by a UL Listed Power
Unit marked “Class 2” or LPS power source which
supplies power directly to the scanner via the 25-pin
connector.
LASER LIGHT
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
MAX. OUTPUT RADIATION 30 mW
EMITTED WAVE LENGTH 630~680 nm
TO EN 60825-1 (2001)
Laser diode class label
Any violation of the optic parts in particular
can cause radiation up to the maximum level
of the laser diode (30 mW at 630 to 680 nm).
DS4600A - 2XXX Models
6
7
8
9
10
5
1
4
2
3
11
12
2
DS4600A - 3XXX Models
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
DS4600A QUICK GUIDE 2 Available Models: DS4600A - X X X X Decoding Mode 2 = Standard w/ Display3 = Advanced Code Reconstruction Reading Range 0 = Medium Range1 = Long Range2 = Short Range Optic Version 0 = Linear1 = Raster R12 = Raster R2 Special Features 0 = Standard5 = Integrated Heater The follow...
DS4600A QUICK GUIDE 3 Accessories: Name Description Part Number C-BOX 100/200 Connection Box 93ACC1510, 93ACC1520 C-BOX 300/310 Connection Box Profibus 93A301000, 93A301030 GFC-41 90° Reading Device 91D081000 OM4000 Oscillating Mirror 93A251030 INT-24 20 mA Current Loop Interface Board 93A151000 Ele...
DS4600A QUICK GUIDE 4 Mechanical Installation: 10 0.39 41.81.64 M4 N° 4 37 1.47 5 0.2 11. 8 0. 46 81 3. 19 8. 25 0. 32 87. 9 3. 46 M4 N°2 58 2. 28 32. 5 1. 28 3.750.15 42 1.65 20 0. 79 83.5 3.29 101 3. 98 18 0. 70 0.90 23 DS4600A 37 20.2 1. 4 6 22* 0.86 0.8 14.80.58 39. 4 1. 5 5 * The quote refers t...
