Cypress WPT-800-HUSB - Manual
Cypress WPT-800-HUSB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – HUSB Installation Manual; ESD Handling Precautions
- Page 3 – Mounting the HUSB; Figure 2. Universal Wall Bracket; Connect the USB cable and close the top cover.
- Page 4 – Powering On the HUSB; To configure the network ID, perform the following:
- Page 5 – Figure 5. Configuring Network ID; Troubleshooting; Code; Repair
- Page 6 – Cypress Envirosystems
HUSB Installation Manual
Doc No. 910-00003-01 Rev 05
Page 1 of 6
1.
Overview
The Cypress Envirosystems Wireless Pneumatic Thermostat (WPT) retrofits an
existing pneumatic thermostat to provide Direct Digital Control (DDC) like zone
control functionality at a fraction of the time and cost without disturbing occupants.
The WPT enables remote monitoring of zone temperature, branch pressure, remote
control of setpoints, and programmable setback or setup of the pneumatic HVAC
systems. It also enables integration with utility Demand Response programs.
The WPT USB Hub (HUSB) is required to connect the WPT wireless network to the
WPT Green Box. One HUSB is required per W PT wireless network. The HUSB is
connected to the WPT Green Box on the USB port.
1.1.
Components
The WPT-800-HUSB kit includes the following components:
•
HUSB – USB Hub
•
Universal wall bracket
•
Mounting screws, #6 x 1” self-tapping (x2)
•
USB cable
1.2.
Prerequisites for Installation
The WPT system relies on a wireless network for communication. The following
tasks must be completed before proceeding to HUSB installation:
•
Installation of the W PT Green Box
•
Assignment of network ID
Manuals for the WPT, WPT Green Box, HUSB and other manuals related to the WPT
system can be found at
http://www.cypressenvirosystems.com/wpt-downloads.php
.
1.3.
Tools Required for Installation
•
Phillips-head screw driver
2.
HUSB Installation
The overall HUSB installation procedure includes:
•
Mounting the HUSB
•
Configuring the HUSB
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
HUSB Installation Manual Doc No. 910-00003-01 Rev 05 Page 2 of 6 ESD Handling Precautions Warning! • The HUSB contains ESD sensitive circuit cards and components, shown in Figure 1. • Great care must be exercised while handling the HUSB with the cover open. • Do not touch any of the circuit boards w...
HUSB Installation Manual Doc No. 910-00003-01 Rev 05 Page 3 of 6 2.1. Mounting the HUSB 1. Mount the universal wall bracket, shown in Figure 2, using the two screws provided. Figure 2. Universal Wall Bracket 2. Mount the HUSB onto the universal wall bracket using the captive screws, shown in Figure ...
HUSB Installation Manual Doc No. 910-00003-01 Rev 05 Page 4 of 6 2.2. Powering On the HUSB The HUSB is powered through the USB port on the WPT Green Box. To power on the HUSB, connect the USB Cable to the WPT Green Box’s USB port. The HUSB turns on and performs initialization. After initialization, ...
