Page 2 - Do not overtighten the screws. To do so; Exposing
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON WARNING: The WPR-48 Waterproof Wireless Handheld Remote has been tested and found to be waterproof when submerged to a maximum depth of 1 ...
Page 3 - Contents; Waterproof Wireless Handheld Remote: WPR-48
Crestron WPR-48 Waterproof Wireless Handheld Remote Contents Waterproof Wireless Handheld Remote: WPR-48 1 Introduction ............................................................................................................................... 1 Features and Functions ..............................
Page 5 - Introduction; Features and Functions; The Crestron; Nine pushbuttons provide up to three functions per button.
Crestron WPR-48 Waterproof Wireless Handheld Remote Waterproof Wireless Handheld Remote: WPR-48 Introduction Features and Functions The Crestron ® WPR-48 waterproof wireless handheld remote can be configured to transmit either RF or IR signals, making it perfect for controlling music, television, li...
Page 6 - Specifications; SPECIFICATION DETAILS; The WPR-48 is shipped from the factory partially assembled. That is,
Waterproof Wireless Handheld Remote Crestron WPR-48 Specifications The following table provides a summary of specifications for the WPR-48. Specifications of the WPR-48 SPECIFICATION DETAILS Power Requirements 3.6 VDC Lithium-Ion battery, 750 mAh Usage per charge: up to 5 hours (backlight On continu...
Page 7 - Physical Description; WARNING; The WPR-48 Wireless Handheld Remote has been tested and found to
Crestron WPR-48 Waterproof Wireless Handheld Remote Physical Description The WPR-48 electronic hardware is housed in a slim, rubberized plastic, waterproof enclosure, with two clear windows for large customized labels that identify the intended button functions. (Refer to the illustration on the nex...
Page 8 - Connectors; circuits in the docking station are automatically disconnected.; Controls; LED indicates that the unit is
Waterproof Wireless Handheld Remote Crestron WPR-48 WPR-48 Physical Views. Connectors The only connectors on the WPR-48 are the two contacts on the back panel. These contacts are used for charging the long-life lithium-ion battery when the unit is placed in the WPR-DS docking station. These contacts...
Page 9 - Industry Compliance; Reorient or relocate the receiving antenna.; Setup; Applying Power
Crestron WPR-48 Waterproof Wireless Handheld Remote Industry Compliance As of the date of manufacture, this unit has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling (N11785). NOTE: This device complies with part 15...
Page 11 - The Viewport first displays a “WPR-48 COM Port” window that lets you
Crestron WPR-48 Waterproof Wireless Handheld Remote “Function | Configure WPR-48” Window 3. The Viewport first displays a “WPR-48 COM Port” window that lets you select the appropriate port. Viewport then displays the “WPR48 Configuration” window, as shown following this step. The configuration windo...
Page 12 - Select one of the “Load . .” buttons to display either the default; Load From File; button, the Viewport displays an “Open” window that; Load From Device; and the device contains disallowed
Waterproof Wireless Handheld Remote Crestron WPR-48 “WPR48 Configuration” Window 4. Select one of the “Load . .” buttons to display either the default configuration values, the current values stored in the WPR-48 in the docking station, or the values saved in a file on the PC. When you select the Lo...
Page 13 - Miscellaneous Settings; Save To File; Setting RF/IR ID via Button Presses; Allow key presses to change unit’s RF or IR ID
Crestron WPR-48 Waterproof Wireless Handheld Remote 6. Specify the RF or the IR gateway compatibility options that apply to your Cresnet system. For an RF configuration, you can also specify the RF power level as a percentage from 1% to 100%. 7. As you select the number of buttons that will be used ...
Page 14 - User-Printable Customized Button Labels; When the “Choose Panel Type” window appears, click on the; Create a new; . The button layout screen appears as
Waterproof Wireless Handheld Remote Crestron WPR-48 LEFT PRESS VALUE BUTTON RIGHT PRESS VALUE [0] 1 [1] [2] Set IR ID 2 [3] Set RF ID [4] 3 [5] [6] 4 [7] [8] 5 [9] [A] 6 [B] [C] 7 [D] [E] 8 [F] To enter the ID number, (two hexadecimal numbers), press the corresponding buttons, such as [6] [B]. The p...
Page 15 - Field One
Crestron WPR-48 Waterproof Wireless Handheld Remote Crestron Engraver Software Button Legend Entry Screen 2. Double click the desired entry field (there are two fields on each side of each button location except the bottom button). The “Enter Text Area Label” window appears as shown in the following...
Page 16 - Installing/Replacing Button Labels; prevent damage to the equipment.
Waterproof Wireless Handheld Remote Crestron WPR-48 4. Once you have entered all the desired button legends, save the file and print the file. You can use any paper from 20-pound bond to 100-pound card stock. Maximum paper thickness is 0.013 in (0.03 cm). Cut out the labels, cutting just inside the ...
Page 17 - Do not overtighten the; Exposing such a unit to water may result in damage to the; Installing Alternate Foot; cavity of the lanyard foot) for use at another time.
Crestron WPR-48 Waterproof Wireless Handheld Remote 3. Place the button labels in position, face down, and carefully assemble the rear cover to the button faceplate, making certain the gasket is properly seated. Use two or three screws to hold the assembly together and turn the unit over to verify t...
Page 18 - Programming the WPR-48; Have a question or comment about Crestron software?; Earliest Version Software Requirements for the PC; NOTE; Device Library
Waterproof Wireless Handheld Remote Crestron WPR-48 Programming the WPR-48 Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website ( www.crestron.com ). Go to http://support.crestron.com to post...
Page 19 - C2Net-Device Slot in Configuration Manager
Crestron WPR-48 Waterproof Wireless Handheld Remote PRO2 System View The System Views lower pane displays the PRO2 system tree. This tree can be expanded to display and configure the communications ports. Expanded PRO2 System Tree C2Net-Device Slot in Configuration Manager An RF gateway device is re...
Page 21 - WPR-48 Symbol in Programming Manager
Crestron WPR-48 Waterproof Wireless Handheld Remote WPR-48 Symbol in Programming Manager Programming Manager is where programmers “program” a Crestron control system by assigning signals to symbols. The following diagram shows the symbol in the SIMPL Windows’ Programming Manager for the WPR-48 (RF)....
Page 22 - > digital presses that correspond to buttons 1; Uploading and Upgrading; Communication Settings; For laptops and other PCs without a built-in RS-232 port, Crestron
Waterproof Wireless Handheld Remote Crestron WPR-48 27-button mode In 27-button mode, the pushbuttons can trigger up to three functions depending on where it is pressed. In this configuration the WPR-48 is programmable using the 27 < _Pg1 > digital presses that correspond to buttons 1 through ...
Page 23 - Setup | Communications; None
Crestron WPR-48 Waterproof Wireless Handheld Remote Results may vary, depending on the computer being used. Other models, even from the same manufacturer, may not yield the same results. The procedure in this section provides details for RS-232 communication between the PC and the WPR-48. Refer to t...
Page 24 - Firmware Upgrade; Open
Waterproof Wireless Handheld Remote Crestron WPR-48 “Port Settings” Window 4. Proceed to “Firmware Upgrade” which follows. Firmware Upgrade A firmware upgrade file has the extension .upg Firmware upgrade files can be obtained from the Downloads | Software Updates | Touchpanels section of Crestron’s ...
Page 25 - to; Problem Solving; Troubleshooting; TROUBLE
Crestron WPR-48 Waterproof Wireless Handheld Remote Select Firmware File 6. If the transfer is successful, the Viewport screen displays a message similar to CNWPR [v0.3] . If the transfer is unsuccessful, the screen will again display the bootloader message CNWPR Bootloader (v8.3). Problem Solving T...
Page 26 - Further Inquiries; Check the Crestron website (
Waterproof Wireless Handheld Remote Crestron WPR-48 Further Inquiries If, after reviewing this Operations Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team in your area. Dial one of the following numbers. • In the...
Page 27 - Return and Warranty Policies; Merchandise Returns / Repair Service
Crestron WPR-48 Waterproof Wireless Handheld Remote Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory an...
