Page 2 - 5 Volvo Drive
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
Page 3 - Contents; Operations Guide – DOC. 5957B
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Contents 2-Series Integrated Dual Bus Control System: AV2 & PRO2 1 Introduction ............................................................................................................................... 1 Features and Funct...
Page 5 - Introduction; Features and Functions; Dual Bus Architecture
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System 2-Series Integrated Dual Bus Control System: AV2 & PRO2 2-Series Integrated Dual Bus Control System: AV2 & PRO2 Introduction Introduction Features and Functions • 2-Series engine with Dual-bus architecture • 36 MB of Interna...
Page 6 - computer or CE/PocketPCTM
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 cards (expansion cage option required for AV2). At a blazing 300 Mbps, the Z-Bus supports Fast Ethernet with future support for other emerging technologies. Cresnet ® Cresnet is the communications backbone for many Crestron touchpan...
Page 7 - Specifications; Specifications for the AV2 & PRO2 are listed in the following table.; SPECIFICATION DETAILS
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Front Panel Control (PRO2 only) The PRO2 includes a programmable front control panel with LCD display and control port status indicators. The PRO2's front panel serves as a ready user interface for system configuration and diagnosti...
Page 9 - Physical Description
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Physical Description This section provides information on the connections, controls and indicators available on your AV2 & PRO2. AV2 Physical View (shown with accessory cards installed in CAGE2; optional) PRO2 Physical View (sho...
Page 11 - CONNECTORS
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Connectors, Controls & Indicators # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 1 COMPUTER FRONT PANEL REAR PANEL DB9F connectors (one on front panel and one on rear) are used when programming with a PC. Each port is mo...
Page 13 - Industry Compliance; Reorient or relocate the receiving antenna.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System 5. The pinout of each 9-pin port is non-standard; it contains RS-422 pins in addition to RS-232. This may result in a conflict with some equipment and therefore all nine pins should not be used. Only the required pins for each commu...
Page 14 - Setup; Network Wiring; Net ID; Hardware Hookup; Ventilation
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lea...
Page 15 - Rack Mounting; Bussing Strip Installation
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System ambient temperature of the rack environment may be greater than the room ambient temperature. Contact with thermal insulating materials should be avoided on all sides of the unit. Rack Mounting The AV2 & PRO2 can be mounted in a...
Page 16 - Memory Card Installation; Memory Card Removal; COMPUTER
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 bussing strips are constructed with four terminal block positions and may be trimmed to size for various applications or different devices. One strip is supplied for each 8-position terminal block. 1. To utilize the bussing strip, d...
Page 17 - Connect the Device
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Connect the Device Make the necessary connections as called out in the illustration that follows this paragraph. Refer to “Network Wiring” on page 10 before attaching the 4-position terminal block connector. Apply power after all co...
Page 18 - Programming Software; Have a question or comment about Crestron software?; First-time users will need to establish a user account.; Earliest Version Software Requirements for the PC; Crestron has developed an assortment of Windows; TASK; Programming with Crestron SystemBuilder; While SIMPL Windows can be used to program the AV2 & PRO2, it is
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have su...
Page 19 - Device Library; Programming Manager; Example Program
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System • To incorporate the AV2 or PRO2 into the system, drag the AV2 or PRO2 from the Control Systems folder of the Device Library and drop it in the System Views. Locating the AV2 & PRO2 in the Device Library Programming Manager Prog...
Page 20 - Uploading and Upgrading; Establishing Communication; TCP/IP Communication; Functions | Ethernet Addressing
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or up...
Page 21 - Functions | IP Table Setup; Programs and Firmware; Tools | Network Device Tree
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System • Use the Address Book in the Crestron Toolbox to create an entry for the AV2 or PRO2 with the AV2’s or PRO2’s TCP/IP communication parameters. • Display the “System Info” window (click the icon) and select the AV2 or PRO2 entry. • ...
Page 22 - Operation; MENU; These buttons scroll the listed information UP and DOWN.; BKLT
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Operation Crestron 2-Series Control Systems are the brain of a complete integrated audio/visual or automation solution, serving as the central processor and I/O interface. Every audio, video and environmental element of the home, bo...
Page 23 - PANEL; the PANEL menu function does not appear on the Main Menu.; INFO; MSG; TYPE DEFINITION; NEXT; or; PREV; to scroll through the entire error log. Some messages may
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Menu Function Buttons PANEL NOTE: If the unit does not have a loaded program with front panel screens defined, the PANEL menu function does not appear on the Main Menu. This menu function button displays a programmable interface off...
Page 25 - NOTE; numbers for the new password, then click the; Change
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System “Front Panel Password” Window NOTE : “Front Panel Password” window from Crestron Toolbox version 1.02.29 or later. 5. To change the current password, use the drop down lists to select the four numbers for the new password, then clic...
Page 26 - COM; Only COM-type devices and cards in the SIMPL Windows program that
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Time Set Submenu COM This button allows the user to monitor the transmission and reception traffic on every COM-type device and card that is active in the SIMPL Windows program that is loaded into the 2-Series control system. This i...
Page 27 - Problem Solving; Possible Problems with the Control System; TROUBLE; PWR
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Problem Solving Problems may occur with the 2-Series integrated dual bus control system itself or there may be serial communication difficulties with other devices connected to the control system. The next two sections address possi...
Page 28 - Network Analyzer; Danger of explosion if battery is incorrectly replaced.; : The information below pertains to the COM Analyzer. The methods
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 AV2 & PRO2 Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION A/V system device does not respond. IRP2 or serial port not placed properly. Verify placement of IRP2 (hold phosphor card under IRP2 while pressi...
Page 30 - Any of the six-menu function buttons toggles the “freeze” state.; Check Network Wiring; Use the Right Wire; R x P
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 NOTE: Any of the six-menu function buttons toggles the “freeze” state. NOTE: The buffer recycles data even when in the “freeze” state. When the screen is unfrozen, the display jumps to the end of the buffer. T/R Screen with Frozen S...
Page 31 - Strip and Tin Wire; Reference Documents; DOCUMENT TITLE; Further Inquiries; ) for a listing of Crestron worldwide offices.; Future Updates
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Strip and Tin Wire When daisy-chaining Cresnet units, strip the ends of the wires carefully to avoid nicking the conductors. Twist together the ends of the wires that share a pin on the network connector, and tin the twisted connect...
Page 32 - Software License Agreement; LICENSE TERMS; OTHER LIMITATIONS
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, wh...
Page 33 - PROPRIETARY RIGHTS
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in ...
Page 34 - Return and Warranty Policies; Merchandise Returns / Repair Service
2-Series Integrated Dual Bus Control System Crestron AV2 & PRO2 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contac...
Page 35 - This page is intentionally left blank.
Crestron AV2 & PRO2 2-Series Integrated Dual Bus Control System Operations Guide – DOC. 5957B 2-Series Integrated Dual Bus Control System: AV2 & PRO2 • 31 This page is intentionally left blank.
