Cisco 7965G - Manual
Cisco 7965G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Cisco Unified Communications Manager Configuration; Network and Access Ports
- Page 3 – Handset; Headset
- Page 4 – Audio Quality Subjective to the User
- Page 5 – Using External Devices; Installing the Cisco Unified IP Phone
- Page 8 – Attaching a Cisco Unified IP Phone Expansion Module
- Page 9 – Adjusting the Placement of the Cisco Unified IP Phone; Adjusting Cisco Unified IP Phone Footstand and Phone Height
- Page 10 – Securing the Phone with a Cable Lock; Mounting the Phone to the Wall
- Page 12 – Verifying the Phone Startup Process
- Page 13 – Configuring Startup Network Settings; Configuring Security on the Cisco Unified IP Phone
C H A P T E R
3-1
Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15427-01
3
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the Cisco Unified IP Phone 7965G and
7945G on an IP telephony network:
•
•
Understanding the Cisco Unified IP Phone 7965G and 7945G Components, page 3-2
•
Installing the Cisco Unified IP Phone, page 3-5
•
Attaching a Cisco Unified IP Phone Expansion Module, page 3-8
•
Adjusting the Placement of the Cisco Unified IP Phone, page 3-9
•
Verifying the Phone Startup Process, page 3-12
•
Configuring Startup Network Settings, page 3-13
•
Configuring Security on the Cisco Unified IP Phone, page 3-13
Note
Before you install a Cisco Unified IP phone, you must decide how to configure the phone in your
network. Then you can install the phone and verify its functionality. For more information, see
Chapter 2, “Preparing to Install the Cisco Unified IP Phone on Your Network.”
Before You Begin
Before installing the Cisco Unified IP Phone, review the requirements in these sections:
•
Network Requirements, page 3-1
•
Cisco Unified Communications Manager Configuration, page 3-2
Network Requirements
For the Cisco Unified IP Phone 7965G and 7945G to successfully operate as a Cisco Unified IP Phone
endpoint in your network, your network must meet these requirements:
•
Working Voice over IP (VoIP) network:
–
VoIP configured on your Cisco routers and gateways
–
Cisco Unified Communications Manager Release 7.0 or higher installed in your network and
configured to handle call processing
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3-2 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0 OL-15427-01 Chapter 3 Setting Up the Cisco Unified IP Phone Understanding the Cisco Unified IP Phone 7965G and 7945G Components • IP network that supports DHCP or manual assignment of IP addr...
3-3 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0 OL-15427-01 Chapter 3 Setting Up the Cisco Unified IP Phone Understanding the Cisco Unified IP Phone 7965G and 7945G Components You can use either Category 3/5/5e/6 cabling for 10 Mbps connec...
3-4 Cisco Unified IP Phone 7965G and 7945G Administration Guide for Cisco Unified Communications Manager 7.0 OL-15427-01 Chapter 3 Setting Up the Cisco Unified IP Phone Understanding the Cisco Unified IP Phone 7965G and 7945G Components Audio Quality Subjective to the User Beyond the physical, mecha...
