Chauvet Colorbar SMD - Manual

Page 3 - Claims

COLORbar™ SMD User Manual (Rev. 2) Page 3 of 17 1. B EFORE Y OU B EGIN What Is Included • COLORbar™ SMD • Locking Power Cord • Warranty Card • Quick Reference Guide Unpacking Instructions Carefully unpack the product immediately and check the container to make sure all the parts are in the package a...

Page 5 - NTRODUCTION; Product Overview

COLORbar™ SMD User Manual (Rev. 2) Page 5 of 17 2. I NTRODUCTION Product Overview Microphone Sound Sensitivity Knob Bracket Adjustment Knob 3-pin DMX In Fuse Holder 5-pin DMX In Power In LED Display Safety Loop 5-pin DMX Out Power Out 3-pin DMX Out

Page 6 - Product Dimensions

Page 6 of 17 COLORbar™ SMD User Manual (Rev. 2) Product Dimensions

Page 7 - ETUP; AC Power; Fuse

COLORbar™ SMD User Manual (Rev. 2) Page 7 of 17 3. S ETUP AC Power The COLORbar™ SMD has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value...

Page 8 - Power Linking

Page 8 of 17 COLORbar™ SMD User Manual (Rev. 2) Power Linking The product provides power linking via the IEC outlet located in the back of the unit. Please see the diagram below for further explanation. Power Linking Diagram You can power link up to three (3) COLORbar™ SMD units @ 120 VAC or up to s...

Page 9 - Mounting; Orientation; Mounting Diagram

COLORbar™ SMD User Manual (Rev. 2) Page 9 of 17 Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes . Orientation The COLORbar™ SMD may be mounted in any position; however, make sure adequate ventilation is provided around the product. Riggi...

Page 10 - PERATION; Control Panel

Page 10 of 17 COLORbar™ SMD User Manual (Rev. 2) 4. O PERATION Control Panel Operation To access the control panel functions, use the four buttons located underneath the display. Please refer to the Product Overview to see the button locations on the control panel. Button Function <MENU> Press...

Page 11 - Configuration; DMX

COLORbar™ SMD User Manual (Rev. 2) Page 11 of 17 Configuration (DMX) Set the product in DMX mode to control with a DMX controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. 3. Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on th...

Page 12 - DMX Channel Assignments and Values

Page 12 of 17 COLORbar™ SMD User Manual (Rev. 2) DMX Channel Assignments and Values 3-CH Channel Function Value Setting 1 Red 000  255 0~100% 2 Green 000  255 0~100% 3 Blue 000  255 0~100% 7-CH Channel Function Value Setting 1 Red 000  255 0~100% 2 Green 000  255 0~100% 3 Blue 000  255 0~100% ...

Page 14 - Static Color Mode

Page 14 of 17 COLORbar™ SMD User Manual (Rev. 2) Configuration (Standalone) Set the product in one of the standalone modes to control without a DMX controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. Never connect a product that is operating in any standalone mode ...

Page 15 - Mode; ECHNICAL

COLORbar™ SMD User Manual (Rev. 2) Page 15 of 17 Master/Slave Mode The Master/Slave mode allows a single COLORbar™ SMD unit (the “master”) to control the actions of one or more COLORbar™ SMD units (the “slaves”) without the need of a DMX controller. The master unit will be set to operate in either A...

Page 17 - Contact Us; Returns

COLORbar™ SMD User Manual (Rev. 2) Page 17 of 17 To return a product or request support: • In the U.S., contact CHAUVET® World Headquarters (see below). • In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below). • In any other country, DO NOT contact CHAUVET®. Instead, contact your distributo...

Chauvet Colorbar SMD - Manual

Table of Contents:

Summary

Other Chauvet Models