Page 2 - AC
CHAUVET®, 2010, All Rights Reserved Information and specifications in this User Manual are subject to change without notice. CHAUVET® assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. T ABLE OF C ONTENTS 1. BEFORE YOU BEGIN ...........................
Page 3 - What is included; Icons
1. Before You Begin 3 4/19/2010 12:44 PM 1. B EFORE Y OU B EGIN What is included 1 x LEDrain™ 64C 1 x Warranty Card 1 x User Manual Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been r...
Page 4 - Safety Instructions
1. Before You Begin 4 4/19/2010 12:44 PM Safety Instructions Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. Always make sure that you are connecting to the proper voltage, and that the line voltage ...
Page 5 - NTRODUCTION; Features; A d d i t i o n a l F e a t u r e s; Product Overview
2. Introduction 5 4/19/2010 12:44 PM 2. I NTRODUCTION Features 3 or 7-channel DMX-512 LED PAR can Operating modes: 3-channel: RGB control 7-channel: RGB, macros, run/strobe speed, automatic/sound, dimmer Static colors and RGB color mixing with or without DMX controller Built-in automated programs vi...
Page 6 - ETUP; AC Power; Power Linking; Additional power; Fixture 1
3. Setup 6 4/19/2010 12:44 PM 3. S ETUP AC Power This fixture runs on 100~240 VAC, 50/60 Hz. Before powering on the unit, make sure the line voltage to which you are connecting it is within the range of accepted voltages. Always connect the fixture to a switched circuit. Never connect the fixture to...
Page 7 - Mounting; Orientation; Rigging
3. Setup 7 4/19/2010 12:44 PM Mounting Bracket Secondary bracket (used primarily for standing position) Mounting Orientation The LEDrain™ 64C may be mounted in any safe position provided there is adequate room for ventilation. Rigging Be sure that the structure can support the weight of the fixture....
Page 8 - Configuring the Starting Address; DMX Operation; Accessing the 2 Personalities
4. Operating Instructions 8 4/19/2010 12:44 PM 4. O PERATING I NSTRUCTIONS Configuring the Starting Address Each fixture requires a starting address from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the starting address. For example,...
Page 9 - Strobe Speed
4. Operating Instructions 9 4/19/2010 12:44 PM Master/Slave Mode (Sound-Active, Auto Mode, Static Colors) This mode allows a single unit to run a standalone program, while 1 or more other units follow the same operation. This requires the fixtures to be linked with DMX cables. Please see the section...
Page 10 - Standalone Operation; Automatic; Fixture Linking; Additional signal
4. Operating Instructions 10 4/19/2010 12:44 PM Standalone Operation Automatic This fixture has a preprogrammed color fade program. This is accessed via the DIP switches on the back of the fixture, and the speed may be increased, as well. Please see the chart below for further explanation. Mode DIP ...
Page 11 - DMX Channel Values
4. Operating Instructions 11 4/19/2010 12:44 PM DMX Channel Values 7-CH Mode C HANNEL V ALUE F UNCTION 1 000 255 Red Dimmer: 0%~100% 2 000 255 Green Dimmer: 0%~100% 3 000 255 Blue Dimmer: 0%~100% 4 000 015 016 255 Color Macros (overrides CH.1~3) No Function Color Macros 5 000 255 Speed (...
Page 12 - PPENDIX; DMX Primer
5. Appendix 12 4/19/2010 12:44 PM 5. A PPENDIX DMX Primer There are 512 channels in a DMX connection. Channels may be assigned in any manner. A fixture capable of receiving DMX will require one or a number of sequential channels. The user must assign a starting address on the fixture that indicates ...
Page 13 - Cable Connectors
5. Appendix 13 4/19/2010 12:44 PM Data Cabling To link fixtures together you must obtain data cables. You can purchase CHAUVET® certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a hi...
Page 14 - Setting up a DMX Serial Data Link
5. Appendix 14 4/19/2010 12:44 PM This drawing provides a general illustration of the DMX input/output panel of a lighting fixture. Universal DMX Controller Continue the link 3-Pin to 5-Pin Conversion Chart If you use a controller with a 5-pin DMX output connector, you will need to use a 5-pin to 3-...
Page 15 - Contact Us; W o r l d W i d e
5. Appendix 15 4/19/2010 12:44 PM Setting the Starting Address This DMX mode enables the use of a universal DMX controller device. Each fixture requires a start address from 1~512. A fixture requiring one or more channels for control begins to read the data on the channel indicated by the start addr...
Page 16 - Returns Procedure; Claims
5. Appendix 16 4/19/2010 12:44 PM Returns Procedure Returned merchandise must be sent prepaid and in the original packing; call tags will not be issued. Package must be clearly labeled with a Return Merchandize Authorization Number (RMA #). Products returned without the RMA # will be refused. Call C...
Page 17 - Technical Specifications
Technical Specifications 17 4/19/2010 12:44 PM Technical Specifications WEIGHT & DIMENSIONS Length .......................................................................................................................... 8.4 in (213 mm) Width........................................................
