Chauvet 3030504 - Manual - manualsarea.com

Page 3 - Claims

4BAR™ Flex User Manual (Rev. 3) Page 3 of 17 1. B EFORE Y OU B EGIN What Is Included • 1 x 4BAR™ Flex • 1 x Power Cord • 1 x Carrying Case • 1 x Footswitch • 1 x Warranty Card • 1 x Quick Reference Guide Unpacking Instructions Immediately upon receipt, carefully unpack the product and check the cont...

Page 5 - NTRODUCTION; Product Overview

4BAR™ Flex User Manual (Rev. 3) Page 5 of 17 2. I NTRODUCTION Product Overview LED Display DMX In DMX Out Tripod Adjustment Knob Fuse Holder Power In Light Adjustment Knob (x 4) Power Outputs for Additional Fixtures

Page 6 - Product Dimensions

Page 6 of 17 4BAR™ Flex User Manual (Rev. 3) Product Dimensions

Page 7 - ETUP; AC Power; Fuse

4BAR™ Flex User Manual (Rev. 3) Page 7 of 17 3. S ETUP AC Power The 4BAR™ Flex has an auto-ranging power supply and it can work with an input voltage range of 100~240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value liste...

Page 8 - Power Linking

Page 8 of 17 4BAR™ Flex User Manual (Rev. 3) Power Linking The product provides power linking via the IEC outlet located in the back of the unit. Please see the diagram below for further explanation. Power Linking Diagram You can power link up to twelve (12) 4BAR™ Flex units on 120 VAC or up to twen...

Page 9 - Mounting; Orientation; Mounting Diagram; Pod pan adjustment

4BAR™ Flex User Manual (Rev. 3) Page 9 of 17 Mounting Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes . Orientation The 4BAR™ Flex may be mounted in any position; however, make sure adequate ventilation is provided around the product. Rigging • B...

Page 10 - PERATION; Control Panel; Menu Map; DMX

Page 10 of 17 4BAR™ Flex User Manual (Rev. 3) 4. O PERATION Control Panel Operation To access the control panel functions, use the four buttons located underneath the display. See the Product Overview to see the button locations on the control panel. Button Function <MENU> Press to find an ope...

Page 11 - DMX Channel Assignments and Values

4BAR™ Flex User Manual (Rev. 3) Page 11 of 17 DMX Channel Assignments and Values 15-CH Channel Function Value Setting 1 Control/Operating Mode 000  009 RGB Color Mixing Mode 010  029 Auto Program 1 030  049 Auto Program 2 050  069 Auto Program 3 070  089 Auto Program 4 090  109 Auto Program 5 ...

Page 12 - Configuration; Automatic Mode; Mode

Page 12 of 17 4BAR™ Flex User Manual (Rev. 3) Configuration (Standalone) Set the product in one of the standalone modes to control without a DMX controller. 1. Connect the product to a suitable power outlet. 2. Turn the product on. Never connect a product that is operating in any standalone mode (ei...

Page 13 - Disconnecting

4BAR™ Flex User Manual (Rev. 3) Page 13 of 17 Footswitch Operation The included footswitch provides quick access to the preset colors, color change programs, and triggering via the onboard microphone on the 4BAR™ Flex: 1. Power on the fixture. 2. Connect the footswitch to the 4BAR™ Flex via the 4-pi...

Page 15 - General Troubleshooting

4BAR™ Flex User Manual (Rev. 3) Page 15 of 17 General Troubleshooting Symptom Possible Cause Possible Action Circuit breaker or fuse keeps blowing Excessive load on the circuit Make sure that the total load does not exceed 80% of the breaker or fuse nominal current Short circuit along the power line...

Chauvet 3030504 - Manual

Table of Contents:

Summary

Other Chauvet Models