Central Pneumatic 98525 - Manual
Central Pneumatic 98525 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SaVe tHiS manual; Safety alert Symbol and Signal; impOrtant SaFetY; inStruCtiOnS pertaining; general; presence of flammable liquids,; visitors away while operating the
- Page 3 – personal safety; ing and use common sense when
- Page 4 – tool use and care; correct tool will do the job better and; identified by the manufacturer for; the specific tool model, increases the; Service; only by qualified repair personnel.
- Page 5 – with the tool or specified by the; breakage of the tool or serious injury; SaVe tHeSe; Symbol Definitions; Specific Safety Instructions
- Page 6 – Vibration precautions
- Page 7 – FunCtiOnal deSCriptiOn; Specifications; aSSemBlY; unpacking
- Page 8 – air Supply; and filter for best service, as shown in
- Page 9 – Operating inStruCtiOnS; tool Set up; way not specifically explained; depth and tighten the Guide Adjust; work piece and work area Set up
- Page 10 – general Operating instructions; tO preVent tOOl
- Page 11 – inStruCtiOnS; Procedures not specifically; lubrication; maintained and the moisture filter
- Page 12 – troubleshooting; problem; tool. disconnect air supply before service.
- Page 13 – partS liSt; pleaSe read tHe FOllOwing CareFullY; able individually as replacement parts.
- Page 14 – aSSemBlY diagram
- Page 15 – limited 1 Year warrantY; WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MER-
2” CirCular Saw
98525
Set up and Operating inStruCtiOnS
distributed exclusively by Harbor Freight tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS manual.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 98525 For technical questions, please call 1-800-444-3353. Page 2 SaVe tHiS manual Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...
SKU 98525 For technical questions, please call 1-800-444-3353. Page 3 tool. Distractions are able to result in the loss of control of the tool. personal safety Stay alert. Watch what you are do- a. ing and use common sense when operating the tool. Do not use the tool while tired or under the influ -...
SKU 98525 For technical questions, please call 1-800-444-3353. Page 4 ly to minimize body exposure, blade binding, or loss of control. tool use and care Use clamps or another practical a. way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is un...
