Central Pneumatic 97956 - Manuals

Page 2 - SAVE THIS MANuAL; Safety Alert Symbol and Signal; IMpORTANT SAFETY; INSTRucTIONS pERTAINING; General; To reduce the risks of fire and; Work area; areas increase the risks of fire and; the presence of flammable liquids,; visitors away while operating the

Page 2 SKU 97956 For technical questions, please call 1-800-444-3353. SAVE THIS MANuAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - personal safety; carry the tool with your finger on the; Tool use and care; workpiece to a stable platform.

Page 3 SKU 97956 For technical questions, please call 1-800-444-3353. personal safety Stay alert. Watch what you are a. doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating...

Page 4 - the specific tool model, increases the; with the tool or specified by the; combustible gases or any bottled; SAVE THESE; Symbol Definitions

Page 4 SKU 97956 For technical questions, please call 1-800-444-3353. Maintain the tool with care. f. Keep the Sandpaper sharp and clean. A properly maintained tool, with sharp, clean Sandpaper reduces the risk of binding and is easier to control. check for misalignment or binding g. of moving parts...

Page 5 - Symbol; Specific Safety Instructions; • Lead from lead-based paints; Vibration precautions

Page 5 SKU 97956 For technical questions, please call 1-800-444-3353. Symbol Definitions Symbol property or statement WARNING marking concerning Risk of Hearing Loss. Wear hearing protection.WARNING marking concerning Risk of Respiratory Injury. Wear NIOSH- approved dust mask/respirator. WARNING mar...

Page 6 - FuNcTIONAL DEScRIpTION; Specifications; components and controls; FIGuRE A

Page 6 SKU 97956 For technical questions, please call 1-800-444-3353. first be examined by a doctor and then have regular medical check- ups to ensure medical problems are not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injur...

Page 7 - ASSEMBLY; unpacking; and filter for best service, as shown

Page 7 SKU 97956 For technical questions, please call 1-800-444-3353. INITIAL TOOL SET up/ ASSEMBLY Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information...

Page 8 - OpERATING INSTRucTIONS; Tool Set up; way not specifically explained

Page 8 SKU 97956 For technical questions, please call 1-800-444-3353. the air tool to retain pressure and operate accidentally after the air supply is disconnected. Note: Air flow, and therefore tool performance, can be hindered by undersized air supply components.The air hose must be long enough 3....

Page 9 - of the Mini Sander, first wipe pad; Work piece and Work Area Set up; tool receives sufficient, unobstructed; cAuTION! TO pREVENT TOOL; If the tool still does not have sufficient

Page 9 SKU 97956 For technical questions, please call 1-800-444-3353. This Straight Line Mini Sander 1. uses PSA, 11” long x 2-3/4” wide Sandpaper.To attach Sandpaper to the Pad (34) 2. of the Mini Sander, first wipe pad surface face of dust and debris. Next remove the protective covering from the g...

Page 10 - INSTRucTIONS; Procedures not specifically; Lubrication; the moisture filter must be regularly

Page 10 SKU 97956 For technical questions, please call 1-800-444-3353. uSER-MAINTENANcE INSTRucTIONS Procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOuS INjuRY FROM AccIDENTAL OpERATION: Turn off the tool, detach the air supply, s...

Page 11 - Troubleshooting; problem; Disconnect air supply before service.; pLEASE READ THE FOLLOWING cAREFuLLY

Page 11 SKU 97956 For technical questions, please call 1-800-444-3353. Troubleshooting problem possible causes Likely Solutions Decreased output. Not enough air pressure and/ 1. or air flow. Obstructed trigger. 2. Incorrect lubrication or not 3. enough lubrication.Blocked air inlet screen (if 4. equ...

Page 12 - pARTS LIST & ASSEMBLY DIAGRAM

Page 12 SKU 97956 For technical questions, please call 1-800-444-3353. pARTS LIST & ASSEMBLY DIAGRAM part # Description Qty. part # Description Qty. 1 Body 1 21 Screw 1 2 Cylinder Bushing 1 22 Spring Pin 1 3 Piston Ring 2 23 Screw 1 4 Cylinder 1 24 Brass Liner 2 5 Rack 2 25 Gear 1 6 Rivet 4 26 P...

Page 13 - able individually as replacement parts.; LIMITED 1 YEAR WARRANTY; WARRANTY IS ExPRESSLY IN LIEU OF ALL OTHER WARRANTIES, ExPRESS OR

Page 13 SKU 97956 For technical questions, please call 1-800-444-3353. Record product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as ...