Central Pneumatic 97014 - Manual
Central Pneumatic 97014 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – saVe this Manual; iMportant saFetY inForMation; danger; Notice
- Page 3 – Distractions can cause you to lose control.
- Page 4 – service; only identical replacement parts.; speciFic saFetY rules; Use with approved engine cleaning fluids only.
- Page 5 – on the cover of this manual as soon as possible.; set up instructions; to the Assembly Diagram near the end of this manual.; assembly; There is no assembly required.; operating instructions; warning
- Page 6 – tool set up; included with this tool but are available at Harbor Freight Tools.; general operating instructions; Figure 1; Siphon Control; does not, do not use until it can be adjusted or repaired.
- Page 7 – indoors out of children’s reach.; Maintenance and serVicing; Before performing any inspection, maintenance, or; inspect the general condition of the tool. Check for; troubleshooting
- Page 8 – please read the Following careFullY; parts list and photo; Record; product’s serial number here:; available individually as replacement parts.
- Page 9 – liMited 90 daY warrantY; OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF
engine cleaning gun
with
4’ siphon hose
Model
97014
set up and operating instructions
note: 4’ Flexible clear Vinyl siphon hose not shown.
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
distributed exclusively by harbor Freight tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVe this Manual.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 97014 For technical questions, please call 1-800-444-3353. saVe this Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...
Page 3 SKU 97014 For technical questions, please call 1-800-444-3353. general saFetY rules warning! read all instructions Failure to follow all instructions listed below may result in serious injury. saVe these instructions work area safety Keep work area clean and well lit. Cluttered or dark areas ...
Page 4 SKU 97014 For technical questions, please call 1-800-444-3353. service Have your Engine Cleaning Gun serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the tool is maintained . speciFic saFetY rules warning! to prevent serious inj...
