Central Pneumatic 97014 - Manuals

Page 2 - saVe this Manual; iMportant saFetY inForMation; danger; Notice

Page 2 SKU 97014 For technical questions, please call 1-800-444-3353. saVe this Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...

Page 3 - Distractions can cause you to lose control.

Page 3 SKU 97014 For technical questions, please call 1-800-444-3353. general saFetY rules warning! read all instructions Failure to follow all instructions listed below may result in serious injury. saVe these instructions work area safety Keep work area clean and well lit. Cluttered or dark areas ...

Page 4 - service; only identical replacement parts.; speciFic saFetY rules; Use with approved engine cleaning fluids only.

Page 4 SKU 97014 For technical questions, please call 1-800-444-3353. service Have your Engine Cleaning Gun serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the tool is maintained . speciFic saFetY rules warning! to prevent serious inj...

Page 5 - on the cover of this manual as soon as possible.; set up instructions; to the Assembly Diagram near the end of this manual.; assembly; There is no assembly required.; operating instructions; warning

Page 5 SKU 97014 For technical questions, please call 1-800-444-3353. speciFications Construction Materials Nozzle: Brass Nozzle Tip, Coupler Fittings and Knurled Knob Trigger: Zinc Housing: Aluminum O-Ring: Rubber Operating Air Pressure 60 PSI Maximum Air Pressure 90 PSI Air Consumption 3.0 CFM @ 6...

Page 6 - tool set up; included with this tool but are available at Harbor Freight Tools.; general operating instructions; Figure 1; Siphon Control; does not, do not use until it can be adjusted or repaired.

Page 6 SKU 97014 For technical questions, please call 1-800-444-3353. tool set up Hose, hose connections, air valve, oiler, filter, regulator, hose reel are not included with this tool but are available at Harbor Freight Tools. general operating instructions Before using, disconnect the positive bat...

Page 7 - indoors out of children’s reach.; Maintenance and serVicing; Before performing any inspection, maintenance, or; inspect the general condition of the tool. Check for; troubleshooting

Page 7 SKU 97014 For technical questions, please call 1-800-444-3353. You can adjust the amount of engine cleaning solution being used by turning the Siphon Control Knob (6) counterclockwise for more solution and clockwise for less. See Figure 1 on page 6. Hold the end of the Spray Nozzle (4) approx...

Page 8 - please read the Following careFullY; parts list and photo; Record; product’s serial number here:; available individually as replacement parts.

Page 8 SKU 97014 For technical questions, please call 1-800-444-3353. please read the Following careFullY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR ...

Page 9 - liMited 90 daY warrantY; OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF

Page 9 SKU 97014 For technical questions, please call 1-800-444-3353. liMited 90 daY warrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials...