Central Pneumatic 93621 - Manual
Central Pneumatic 93621 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PAGE 2; Parts List on page; number shown on the cover of this manual as soon as possible.
- Page 3 – WORK AREA
- Page 4 – SPECIFIC SAFETY RULES
- Page 5 – SAVE THESE INSTRUCTIONS; To Attach A Quick Connector:
- Page 6 – and hearing protection when operating the Die Grinder.; and Grinding Drum in place.; RECOMMENDED COMPRESSED AIR SYSTEM
- Page 7 – clockwise; FIGURE C
- Page 8 – PAGE 8; Always make sure the Trigger (3) is in its “OFF” position,; inspect the general condition of the Die Grinder. Check for; Do not use damaged equipment.; dry location out of reach of children.; PLEASE READ THE FOLLOWING CAREFULLY
- Page 9 – PAGE 9; PARTS LIST; ASSEMBLY DIAGRAM
AIR DIE GRINDER
with 3” Shaft
Model 93621
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
Copyright
©
2005 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 11h
®
Due to continuing improvements, actual product may differ slightly from the product described herein.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front co...
3. Keep bystanders, children, and visitors away while operating a pneumatic tool. Distractions can cause you to lose control. Protect others in the work area from debris such as metal filings and sparks. Provide barriers or shields as needed. PERSONAL SAFETY 1. Stay alert. Watch what you are doing, ...
2. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 3. Do not use the power tool if the Trigger does not turn it on or off. Any tool that cannot be controlled with the Trigger is dangerous and mu...
