Central Pneumatic 98525 - Manuals

Page 2 - SaVe tHiS manual; Safety alert Symbol and Signal; impOrtant SaFetY; inStruCtiOnS pertaining; general; presence of flammable liquids,; visitors away while operating the

SKU 98525 For technical questions, please call 1-800-444-3353. Page 2 SaVe tHiS manual Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...

Page 3 - personal safety; ing and use common sense when

SKU 98525 For technical questions, please call 1-800-444-3353. Page 3 tool. Distractions are able to result in the loss of control of the tool. personal safety Stay alert. Watch what you are do- a. ing and use common sense when operating the tool. Do not use the tool while tired or under the influ -...

Page 4 - tool use and care; correct tool will do the job better and; identified by the manufacturer for; the specific tool model, increases the; Service; only by qualified repair personnel.

SKU 98525 For technical questions, please call 1-800-444-3353. Page 4 ly to minimize body exposure, blade binding, or loss of control. tool use and care Use clamps or another practical a. way to secure and support the workpiece to a stable platform. Holding the work by hand or against the body is un...

Page 5 - with the tool or specified by the; breakage of the tool or serious injury; SaVe tHeSe; Symbol Definitions; Specific Safety Instructions

SKU 98525 For technical questions, please call 1-800-444-3353. Page 5 when servicing a tool, use only b. identical replacement parts. use only authorized parts.use only the lubricants supplied c. with the tool or specified by the manufacturer. air source a. never connect to an air source that is cap...

Page 6 - Vibration precautions

SKU 98525 For technical questions, please call 1-800-444-3353. Page 6 State of California] to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints • Crystalline silica from bricks and cement or other masonry products • Arsenic an...

Page 7 - FunCtiOnal deSCriptiOn; Specifications; aSSemBlY; unpacking

SKU 98525 For technical questions, please call 1-800-444-3353. Page 7 Include vibration-free periods each 5. day of work.Grip tool as lightly as possible (while 6. still keeping safe control of it). Let the tool do the work.To reduce vibration, maintain tool as 7. explained in this manual. If abnorm...

Page 8 - air Supply; and filter for best service, as shown in

SKU 98525 For technical questions, please call 1-800-444-3353. Page 8 air Supply tO preVent explOSiOn: use only clean, dry, regulated, compressed air to power this tool. do not use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool. 1. Incorporate an ...

Page 9 - Operating inStruCtiOnS; tool Set up; way not specifically explained; depth and tighten the Guide Adjust; work piece and work area Set up

SKU 98525 For technical questions, please call 1-800-444-3353. Page 9 If the tool will not be used at this 9. time, turn off and detach the air sup- ply, safely discharge any residual air pressure, and release the throttle and/or turn the switch to its off posi- tion to prevent accidental operation....

Page 10 - general Operating instructions; tO preVent tOOl

SKU 98525 For technical questions, please call 1-800-444-3353. Page 10 allow access by children or pets to prevent injury and distraction. Route the air hose along a safe route 2. to reach the work area without creat- ing a tripping hazard or exposing the air hose to possible damage. The air hose mu...

Page 11 - inStruCtiOnS; Procedures not specifically; lubrication; maintained and the moisture filter

SKU 98525 For technical questions, please call 1-800-444-3353. Page 11 uSer-maintenanCe inStruCtiOnS Procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS injurY FrOm aCCidental OperatiOn: turn off the tool, detach the air supply, s...

Page 12 - troubleshooting; problem; tool. disconnect air supply before service.

SKU 98525 For technical questions, please call 1-800-444-3353. Page 12 troubleshooting problem possible Causes likely Solutions Decreased output. Not enough air pressure and/ 1. or air flow. Obstructed trigger. 2. Incorrect lubrication or not 3. enough lubrication.Blocked air inlet screen (if 4. equ...

Page 13 - partS liSt; pleaSe read tHe FOllOwing CareFullY; able individually as replacement parts.

SKU 98525 For technical questions, please call 1-800-444-3353. Page 13 partS liSt part description Qty 1 Driven Gear Shaft 1 2 Needle Roller 2 3 Bevel Gear 2 4 Ball Bearing 1 5 Blade Holder Flange 1 6 Blade Bolt Flange 1 7 Blade Bolt 1 8 Bevel Gear Casing 1 9 Ball Bearing 1 10 External Stop Ring 1 1...

Page 14 - aSSemBlY diagram

SKU 98525 For technical questions, please call 1-800-444-3353. Page 14 aSSemBlY diagram

Page 15 - limited 1 Year warrantY; WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MER-

SKU 98525 For technical questions, please call 1-800-444-3353. Page 15 limited 1 Year warrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in material...