Central Pneumatic 97525 - Manual
Central Pneumatic 97525 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – powered tools in the presence of flammable gases or liquids.
- Page 3 – Do not operate tool if under the influence of alcohol or drugs
- Page 4 – Do not fire fasteners too close to the edge of a workpiece
- Page 5 – Unpacking; manual as soon as possible.; Testing The Single Sequential Safety Trip Mechanism; the nailer/Stapler at a piece of scrap wood when testing.; Make sure the tool is disconnected from the air supply.; Operation; air pressure of 100 PSI.
- Page 6 – Loading Nails or Staples; ALWAYS WEAR ANSI APPROVED IMPACT SAFETY GOGGLES WHEN; Operating the Stapler/Nailer; Do not fire repeatedly
- Page 7 – Anytime; any; disconnected and is incapable of firing any staples.; Clearing Jams; Figure 1; FIGURE 1
- Page 8 – Troubleshooting Guide; Problem
- Page 9 – Maintenance; Parts List
- Page 10 – Assembly Drawing
- Page 11 – LIMITED 1 YEAR WARRANTY; MERCHANTABILITY AND FITNESS.
AIR NAILER/STAPLER
2-IN-1 KIT
97525
40115
ASSEMBLY and OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Model
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 97525 40115 Page 2 For technical questions, please call 1-800-444-3353. Specifications Air Inlet 1/4” - 18 NPT Recommended Air Pressure 60 - 100 PSI, 100 PSI Max. Magazine Capacity 100 Nails or 80 Staples Safety Feature Single Sequential Safety Trip Mechanism Nail Size .039-.042” Shank (18 Gauge...
SKU 97525 40115 Page 3 For technical questions, please call 1-800-444-3353. 8. Use eye and ear protection . Always wear ANSI-approved impact safety goggles and appropriate hearing protection. Wear a full face shield if you are producing metal filings or wood chips. Wear a NIOSH-approved dust mask or...
SKU 97525 40115 Page 4 For technical questions, please call 1-800-444-3353. heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. Check your air compressor’s manual for the appropriate size cord. It is also possible that the use of an extension ...
