Central Pneumatic 97511 - Manual
Central Pneumatic 97511 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 5 – Note
- Page 6 – Page 6; Testing The Full Sequential Safety Trip Mechanism; . Release the trigger and squeeze it again.; Loading Nails; before
- Page 7 – OPERATION; Assembly
- Page 8 – Page 8; To Adjust The Depth To Which A Nail Is Driven; The depth to which a nail is driven is controlled by the Safety (38).; FIGURE B
- Page 9 – Page 9; FIGURE C; Anytime; any; and is incapable of firing any brads.; spring-loaded and may cause parts or a nail to fly out of the Nailer.; Clearing Jams; of the air is expended from the Nailer.; see Figure D; technician for proper servicing.
- Page 10 – Do not use damaged equipment.; use a premium quality, lightweight oil to lubricate all moving; FIGURE D
- Page 12 – 0 Day Warranty; IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE
FRAMING NAILER
21° ANGLE / 10 GAUGE
97511
93909
SET UP AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 Page 5 UNPACKING When unpacking, check to make sure all the parts shown on the Parts List on page 11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual ...
SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 Page 6 Testing The Full Sequential Safety Trip Mechanism Warning: Even though the nailer should be empty during this procedure, ALWAYS point the Nailer at a piece of scrap wood when testing. 1. The Nailer should not fire if the nose...
SKU 97511 93909 For Technical Questions, Please Call 1-800-444-3353 Page 7 OPERATION NOTE: For additional references to the parts listed below, refer to the Assembly Diagram on page 11. 1. Adjust the Exhaust Cover (4) to direct exhaust as desired. 2. To fire a nail, place the nose of the Nailer on t...
