Central Pneumatic 94996 - Manual
Central Pneumatic 94996 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – regularly by a qualified technician.; have an ABC rated fire extinguisher near by.; Product Specific Safety Precautions
- Page 4 – Please note: The Paint Spray Gun Washer comes fully assembled.
- Page 5 – Turn on the Output Hose Switch. See photo at the top of page 6.
- Page 6 – Turn on the air compressor and set its pressure to 40 PSI.; Turning the System Off; When finished with the Washer, disconnect from the air supply.
- Page 7 – Draining Cleaning Fluid from Tank; Troubleshooting
- Page 8 – Parts List
- Page 9 – Assembly Drawing
- Page 10 – 0 DAY WARRANTY
PAINT SPRAY GUN WASHER
94996
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 11h
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 3 SKU 94996 For technical questions, please call 1-800-444-3353 10. Avoid unintentional starting . Be sure the switch is in the Off position when not in use and before plugging in air supply. 11. Stay alert . Watch what you are doing, use common sense. Do not operate any tool when you are tired...
Page 4 SKU 94996 For technical questions, please call 1-800-444-3353 Unpacking When unpacking, check to make sure all parts are included. Refer to the Assembly Drawing and Parts List located at the end of this manual. If any parts are missing or broken, please call Harbor Freight Tools at the number...
Page 5 SKU 94996 For technical questions, please call 1-800-444-3353 4. Place the Spray Gun intake Nozzle onto the Gun Rack connector (in Tank). See photo below. 5. Place the Spray Gun Cup on the Tank rack as shown below. It can be placed on its side (as shown below) or upside down on the Cup Holder...
