Central Pneumatic 97053 - Manual
Central Pneumatic 97053 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DANgER; Notice; CAuTION
- Page 3 – gENERAL SAFETY RuLES; Keep work area clean and well lit.
- Page 4 – Service; This will ensure that the safety of the power tool is; VIBRATION HAzARD; and shoulders. To reduce the risk of vibration-related injury:
- Page 5 – abnormal vibration occurs, stop use immediately.; SPECIFIC SAFETY RuLES; . Never operate the
- Page 6 – SAVE THESE INSTRuCTIONS.; SPECIFICATIONS
- Page 7 – uNPACKINg; cover of this manual as soon as possible.; SET uP INSTRuCTIONS; to the Assembly Diagram near the end of this manual.; Assembly; Then firmly screw on the Quick Connector.; WARNINg; water filter as shown in the illustration on the next page.
- Page 8 – FIguRE B; Attach the; ” diameter; Sand Paper Disc to the Sander’s Pad (38) by pressing it; FIguRE C; Use only cold, clean water. Never run the Wet Sander; FIguRE D
- Page 9 – OPERATINg INSTRuCTIONS; Prior to using the Sander, make sure to wear ANSI-approved
- Page 10 – MAINTENANCE AND SERVICINg; Risk of serious personal injury from accidental starting.; inspect the general condition of the Sander. Check for
- Page 11 – TROuBLESHOOTINg; Problem
- Page 12 – PARTS LIST
- Page 13 – ASSEMBLY DIAgRAM
- Page 14 – LIMITED 1 YEAR WARRANTY; THIS; Record; available individually as replacement parts.; PLEASE READ THE FOLLOWINg CAREFuLLY
PALM ORBITAL WET SANDER
5 INCH
Model
97053
SET uP AND OPERATINg INSTRuCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 97053 For technical questions, please call 1-800-444-3353. SAVE THIS MANuAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...
Page 3 SKU 97053 For technical questions, please call 1-800-444-3353. gENERAL SAFETY RuLES WARNINg! Read all instructions Failure to follow all instructions listed below may result in serious injury. The term “power tool” in all of the warnings listed below refers to your 5” Palm Orbital Wet Sander....
Page 4 SKU 97053 For technical questions, please call 1-800-444-3353. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children, and do not allow people d. unfamiliar with the Sander or these instructions to operate t...
