Central Pneumatic 95218 - Manual
Central Pneumatic 95218 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PROdUcT SPEcIFIcATIONS; SAVE THIS MANUAL; SAFETy wARNINGS ANd PREcAUTIONS
- Page 5 – UNPAcKING; listed on page 11; AIR SUPPLy SETUP
- Page 6 – TESTING THE SINGLE SEQUENTIAL SAFETy TRIP MEcHANISM; 0 to 125 operating PSI. do not exceed the maximum 125
- Page 7 – LOAdING bRAdS ANd STAPLES; wARNING: Always wear ANSI-approved impact safety goggles when us-; Other
- Page 8 – OPERATING THE NAILER/STAPLER; do not exceed the maximum 125 PSI.
- Page 9 – cLEARING jAMS; Use eye and ear protection when clearing jams.
- Page 10 – Store the tool in a clean, dry, safe location out of reach of children.; TROUbLESHOOTING; Problem
- Page 11 – PARTS LIST; individually as replacement parts.; PLEASE REAd THE FOLLOwING cAREFULLy
- Page 12 – wARRANTy; Limited 90 day; ASSEMbLy dIAGRAM
NAILER/STAPLER
OIL FREE - 18 GAUGE
Model
95218
ASSEMbLy ANd OPERATION INSTRUcTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INjURy, REAd ANd UNdERSTANd
ALL wARNINGS ANd INSTRUcTIONS bEFORE USE.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 2 PROdUcT SPEcIFIcATIONS Fastener Capacity 18 Gauge (5/8” – 2” Brads) / (5/8” – 1-5/8” Staples) 1/4” Crown Magazine Capacity 100 Fasteners Load Style Top Loading Magazine Operating PSI 125 PSI Maximum* Average Air Flow 3.0 CFM Air In...
SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 5 Crystalline silica from bricks and cement or other masonry products Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure...
SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 6 TESTING THE SINGLE SEQUENTIAL SAFETy TRIP MEcHANISM wARNING: Even though the Nailer should be empty during this procedure, ALWAYS point the Nailer at a piece of scrap wood when testing. Always wear ANSI-approved safety goggles. Mak...
