Central Pneumatic 95218 - Manuals

Page 2 - PROdUcT SPEcIFIcATIONS; SAVE THIS MANUAL; SAFETy wARNINGS ANd PREcAUTIONS

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 2 PROdUcT SPEcIFIcATIONS Fastener Capacity 18 Gauge (5/8” – 2” Brads) / (5/8” – 1-5/8” Staples) 1/4” Crown Magazine Capacity 100 Fasteners Load Style Top Loading Magazine Operating PSI 125 PSI Maximum* Average Air Flow 3.0 CFM Air In...

Page 5 - UNPAcKING; listed on page 11; AIR SUPPLy SETUP

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 5 Crystalline silica from bricks and cement or other masonry products Arsenic and chromium from chemically treated lumber Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure...

Page 6 - TESTING THE SINGLE SEQUENTIAL SAFETy TRIP MEcHANISM; 0 to 125 operating PSI. do not exceed the maximum 125

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 6 TESTING THE SINGLE SEQUENTIAL SAFETy TRIP MEcHANISM wARNING: Even though the Nailer should be empty during this procedure, ALWAYS point the Nailer at a piece of scrap wood when testing. Always wear ANSI-approved safety goggles. Mak...

Page 7 - LOAdING bRAdS ANd STAPLES; wARNING: Always wear ANSI-approved impact safety goggles when us-; Other

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 7 LOAdING bRAdS ANd STAPLES wARNING: Always wear ANSI-approved impact safety goggles when us- ing, reloading, or performing any other maintenance on this tool. Other people in the work area must also wear ANSI-approved impact safety ...

Page 8 - OPERATING THE NAILER/STAPLER; do not exceed the maximum 125 PSI.

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 8 OPERATING THE NAILER/STAPLER Attach the Nailer/Stapler to the air supply at the Air Inlet Plug (78). Start your com-pressor and check the pressure, making sure it is set no higher than 125 PSI. do not exceed the maximum 125 PSI. Ro...

Page 9 - cLEARING jAMS; Use eye and ear protection when clearing jams.

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 9 Anytime any maintenance or repairs are done (including clearing jams), FIRST: Disconnect the Nailer/Stapler from its air supply.Empty the Moveable Magazine (61) completely.Attempt to fire the Nailer into a piece of scrap wood to en...

Page 10 - Store the tool in a clean, dry, safe location out of reach of children.; TROUbLESHOOTING; Problem

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 10 Anytime any maintenance or repairs are done (including clearing jams), FIRST: Disconnect the Nailer/Stapler from its air supply.Empty the Moveable Magazine (61) completely.Attempt to fire the Nailer into a piece of scrap wood to e...

Page 11 - PARTS LIST; individually as replacement parts.; PLEASE REAd THE FOLLOwING cAREFULLy

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 11 PARTS LIST Part description 1 Bolt 2 Deflector Spring 3 Air Deflector 4 Bolt (M5 x 20) 5 Spring Washer 6 Cylinder Cover 7 O-Ring (13.7 x 2.4) 8 Flat Washer 9 Compressed Spring 10 Switch Valve 11 Sealing Washer 12 O-Ring (24.8 x 3....

Page 12 - wARRANTy; Limited 90 day; ASSEMbLy dIAGRAM

SKU 95218 For technical questions, please call 1-800-444-3353 PAGE 12 1 2 3 4 5 6 7 8 9 10 11 12 13 21 20 19 18 17 16 15 14 22 4 5 23 33 31 36 37 38 39 40 41 42 43 74 24 25 26 27 28 29 30 65 75 73 72 71 33 32 31 64 35 34 63 62 61 60 59 66 67 64 69 70 68 58 37 56 55 54 53 52 51 50 49 78 77 76 44 45 4...