Central Pneumatic 95173 - Manual
Central Pneumatic 95173 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – sPEcIfIcATIOns; Operating Air Pressure; sAVE THIs MAnUAl; UnPAcKIng
- Page 5 – AssEMbly InsTRUcTIOns; fIgURE A; If an automatic oiler is not used, put 3-5 drops of; fIgURE b; Air Filter
- Page 6 – OPERATIOn; fIgURE d; When drilling rivet holes in a workpiece, make sure to use the same; do not exceed 90
- Page 7 – Always wear ANSI-approved safety impact goggles when perform-; To clean the exterior of the Riveter,; wipe with a clean, damp cloth using a mild; To clean and change the jaws:; fIgURE E
- Page 8 – The Riveter comes from the factory with hydraulic oil included.; always store the Riveter in a clean, dry, safe location out of reach; PlEAsE REAd THE fOllOwIng cAREfUlly
- Page 9 – TROUblEsHOOTIng; PARTs lIsT
- Page 10 – AssEMbly dIAgRAM
- Page 11 – wARRAnTy; LImITed 1 yeAr
PREMIUM AIR RIVETER
Model
95173
AssEMbly And OPERATIOn InsTRUcTIOns
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVEnT sERIOUs InjURy, REAd And UndERsTAnd
All wARnIngs And InsTRUcTIOns bEfORE UsE.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
for technical questions or replacement parts, please call 1-800-444-3353.
MAnUAl REVIsEd 01/07
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 95173 for technical questions, please call 1-800-444-3353 PAGE 2 sPEcIfIcATIOns Rivet Capacity (Pin Diameter) 3/32”, 1/8”, 5/32”, 3/16” Operating Air Pressure 85 to 90 PSI Air Consumption 4.5 SCFM @ 90 PSI Air Inlet Size 1/4”-18 NPT Overall Dimensions 11” High x 10-1/8” Long x 4” Wide Weight ~3 ...
SKU 95173 for technical questions, please call 1-800-444-3353 PAGE 5 AssEMbly InsTRUcTIOns REgUlATOR fIgURE A fIlTER OIlER For best service, you should incorporate an oiler, regulator, and in-line filter, as shown in the diagram above. Hoses, couplers, oilers, regulators, and filters are all availab...
SKU 95173 for technical questions, please call 1-800-444-3353 PAGE 6 OPERATIOn bOTTlE (15) TRIggER (25) nOsEPIEcE (1) OUTER cylIndER (2) AIR sUPPly HOsE (nOT InclUdEd) fIgURE d Make sure the Bottle (15) is firmly inserted onto the Airproof Lid (16) of the Riveter. (see figure d.) Depending on the si...
