Central Pneumatic 95014 - Manual
Central Pneumatic 95014 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – listed on pages; SAFETY WARnIngS AnD PREcAUTIOnS; Keep work area clean.; atmospheres, such as in the presence of flammable liquids, gases, or
- Page 4 – regularly only by a qualified technician.; Maintain a firm grip on the Blast Gun when in use.
- Page 6 – SAVE ThESE InSTRUcTIOnS
- Page 7 – PAGE 7; ASSEMBLY InSTRUcTIOnS; To Attach The Handle Bars:; “Left”; and; “Right”; . Align the holes in the left; FIgURE B; To Attach The Wheels And Front Foot:
- Page 8 – FIgURE c
- Page 9 – OPERATIng InSTRUcTIOnS; media; “OFF”; If this is a large job, fill the Tank only 3/4 full and reload as needed
- Page 10 – FIgURE D; FIgURE E
- Page 11 – air compressor, and set its regulator between; “On”; Grip the Blast Gun firmly with both hands.; FIgURE F
- Page 13 – PLEASE READ ThE FOLLOWIng cAREFULLY; manual must only be performed by a qualified service technician.
- Page 14 – PAGE 14; TROUBLEShOOTIng
- Page 15 – PARTS LIST & ASSEMBLY DIAgRAM - AIR BLASTER; PAGE 15
- Page 16 – PAGE 16; PARTS LIST & ASSEMBLY DIAgRAM - BLAST gUn
- Page 17 – LIMITED 90 DAY WARRAnTY; of exclusion may not apply to you.; ThIS WARRAnTY IS ExPRESSLY In LIEU OF ALL; which vary from state to state.
PRESSURIZED ABRASIVE
BLASTER
Model
95014
ASSEMBLY AnD OPERATIng InSTRUcTIOnS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE ThIS MAnUAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-
ments, actual product may differ slightly from the product described herein. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10d
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PRODUcT SPEcIFIcATIOnS SKU 95014 For technical questions, please call 1-800-444-3353 PAGE 2 SAVE ThIS MAnUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice wit...
SKU 95014 For technical questions, please call 1-800-444-3353 PAGE 4 15. Replacement parts and accessories. This product is to be repaired and serviced only by a qualified technician. When this product is serviced, only identical replacement parts should be used. Use of any other parts will void the...
6. Use respiratory protection when source controls cannot keep silica exposures below the recommended levels. 7. Provide periodic medical examinations for all workers who may be exposed to crystalline silica. 8. Post signs to warn workers about the hazard and to inform them about required protective...
