Central Pneumatic 90342 - Manual
Central Pneumatic 90342 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – powered tools in the presence of flammable gases or liquids.
- Page 3 – Do not operate tool is under the influence of alcohol or drugs; . If an extension cord is required, it must
- Page 4 – SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS; a nail from being accidentally fired during connection.
- Page 5 – The nails can ricochet, causing personal injury.; Do not drive nails close to the edge of a workpiece.; The workpiece is likely to; Unpacking; manual as soon as possible.
- Page 6 – Page; Air Connection Setup; tape before threading it into the
- Page 7 – Operation; Nailer Specific Warnings!
- Page 8 – of the nailer. Give the trigger a quick pull and release.
- Page 9 – Worn or dirty bumper, damaged pusher spring, inadequate air flow,; to make sure all of the air is expended.; Maintenance; not deep enough, take the Nailer to a qualified service technician.
- Page 10 – Parts List
- Page 11 – Assembly Drawing
- Page 12 – LIMITED 1 YEAR WARRANTY; MERCHANTABILITY AND FITNESS.
CONCRETE “T” NAILER
(3/4” TO 2-1/2”)
ASSEMBLY and OPERATING INSTRUCTIONS
Model
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
97512
90342
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 90342 Specifications Recommended Air Pressure 85 - 115 PSI Maximum Air Pressure 115 PSI Air Inlet 1/4” - 18 NPT Nail Capacity 3/4” to 2-1/2” T Nails Magazine Capacity 80 (Side Load) Air Consumption 7.4 CFM Includes: Coupler Plug, 3 Hex Keys, Tool Oil, OSHA Approved Goggles, Replacement na...
Page 3 SKU 90342 Do not overreach . Keep proper footing and balance at all times. Do not reach over or across running machines or air hoses. Maintain tools with care . Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords ...
Page 4 SKU 90342 SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS Important consumer information: This Nailer is equipped with a contact trip Trigger. This Trigger mechanism is designed primarily for high volume work where exact placement of the nail is not critical. By holding the Trigger, the Nailer will...
