Canon WITE32- User Manual

Page 2 - Table of Contents; Guzik Technical Enterprises

WITE32 Release Notes Version 3.11 Table of Contents Chapter 1 New Hardware Supported in WITE32 .................................................................................................... 3 1.1 Support of Servo Revision 3 for RWA-2000 Series .....................................................

Page 3 - Support of Servo Revision 3 for RWA-2000 Series; Guzik Servo Revision 3 For RWA-2000 Series; Comb Loader for Guzik V2002 Spinstands; Comb Loader Installation; Ping Pong Cartridge Design for Guzik 1701A+ Spinstands; The WITE32 software version 3.11 supports a

WITE32 Release Notes Version 3.11 CHAPTER 1 NEW HARDWARE SUPPORTED IN WITE32 1.1 Support of Servo Revision 3 for RWA-2000 Series WITE32 software version 3.11 supports the RWA-2000 series of testers equipped with Servo Revision 3. Please refer to the Guzik Servo Revision 3 For RWA-2000 Series documen...

Page 4 - Micro Actuator Support for Guzik V2002 Spinstands; Micro Actuator Tests User's Guide; Compatibility; Micro Actuator

WITE32 Release Notes Version 3.11 1.4 Micro Actuator Support for Guzik V2002 Spinstands A Micro Actuator is a device located on the suspension of a magnetic head that can transform applied voltage to the radial displacement of the head. Micro Actuator testing is supported on Guzik V2002 Spinstands s...

Page 5 - Amplifiers; GTEMR4PP; Stacks; WABASH3 – WABASH3; Support of Head Amplifier Multiplexer

WITE32 Release Notes Version 3.11 1.5 Head Amplifiers The following head amplifiers are initially supported in WITE32 version 3.11: • 81G214M • 81G5114D • 81G5114P • GTEMR4PP • MINI • MR5M_M • MUX_SR1795BAA • PA7500 • PA7501 • PA7515 • SR1671 • SR1850B • SR1852 • SR1880 • TLS26A954AA • TLS26D714 • W...

Page 6 - New System Erase and System Band Erase Configuration; Figure 2

WITE32 Release Notes Version 3.11 CHAPTER 2 WITE32 MODIFICATIONS 2.1 New System Erase and System Band Erase Configuration Two new system configuration sets are introduced in WITE32: System Erase and System Band Erase . All tests and operations, which invoke erase operation or band erase operation, u...

Page 8 - Using System Erase In WITE32 Tests; System Erase

WITE32 Release Notes Version 3.11 CAUTION: When you upgrade tos WITE32 version 3.11 from the previous versions of WITE32, the product update procedure performs the conversion of the old band erase configuration (specified in terms of number of tracks to erase) to the new band erase configuration (sp...

Page 10 - Tests With Band Erase Configuration; System Band Erase

WITE32 Release Notes Version 3.11 The new Erase Setup button is added to the configuration dialog box of the test. When it is clicked, an Erase configure dialog box will open: The caption shows which test erase operation configuration is being edited Selects between using a System Erase configuratio...

Page 13 - Figure 9; V2002 Product Parameters Dialog Box Modifications

WITE32 Release Notes Version 3.11 2.2 New Adjacent Track Interference Module (WATI) The new Adjacent Track Interference module (WATI module) is added to WITE32 package. This module contains one test – the Adjacent Track Interference test. Please refer to the WATI Module Users Guide (P/N 02-107268-02...

Page 18 - XY Alignment Test Configuration Dialog Box; Installation

WITE32 Release Notes Version 3.11 • The Use CCW Micro Actuator Parameters check box indicates that CCW parameters will be applied to the CW Micro Actuator. Please enable this check box if configurations of both CW and CCW actuators are identical, such that you do not have to configure the same param...

Page 19 - The Write With Retries Operation; Measurement Options Dialog Box in WITE32 version 3.11

WITE32 Release Notes Version 3.11 • Changes in the configuration of Guzik Technical Enterprises PCI boards (adding/removing/changing PCI slot) on the host computer do not require to reinstall the driver from the WITE32 installation disk. 2.5 The Write With Retries Operation A new type of operation i...

Page 20 - TAA Calibration Through Programmable Differentiator; not; Error / Warning Report Modification; shown in the

WITE32 Release Notes Version 3.11 2.6 TAA Calibration Through Programmable Differentiator Starting from WITE32 version 3.11, the calibration of amplification of programmable differentiator filters is not performed during TAA calibration. All programmable differentiators are assumed to have the same ...

Page 21 - Head Selection in the WITE32 Engineering Dashboard

WITE32 Release Notes Version 3.11 The Errors at The Test End check box If the check box is checked, no error messages during the production test will be shown. The buffered messages will be shown in a separate dialog box at the end of the production test. Moreover, the buffered messages will be appe...

Page 22 - Write Pattern Operation Configuration

WITE32 Release Notes Version 3.11 2.9 Miscellaneous 1. The maximum number of result records in the WITE32 result processor is doubled so that more test results (up to 200,000) can be accommodated at run-time. 2. The new signal WOPEN (Write Operation Enable) is added to the list of available sources ...

Page 24 - Spinstand

WITE32 Release Notes Version 3.11 CHAPTER 3 FIXED BUGS The following bugs were discovered in WITE32 version 3.10 or earlier, and fixed in WITE32 version 3.11. The description below explains the bug behavior as it appears in WITE32 version 3.10. 3.1 V2002 Spinstand 1. The XY Alignment test may fail w...

Page 26 - Tests and Measurements

WITE32 Release Notes Version 3.11 • SR1715 – No readback from the chip registers. Head Amplifier zone/setup dependent parameters are not loaded into the chip after you start the device. • TDA5160, TDA5360 – Improper head channel is selected after you start the device. 3. The following bugs are fixed...

Page 28 - Operating system

WITE32 Release Notes Version 3.11 CHAPTER 4 SUPPORT OF MICROSOFT WINDOWS XP OPERATING SYSTEM Microsoft Windows XP Service Pack 1a (SP1a) is supported in the WITE32 software. You must have the patch 822603 for Windows XP installed before you run WITE32. The table below lists the operating systems app...

Page 29 - CHAPTER 5; Head Alignment

WITE32 Release Notes Version 3.11 Guzik Technical Enterprises 29 CHAPTER 5 KNOWN ISSUES For Guzik V2002 spinstand, after upgrading from WITE32 version 3.10 to WITE32 version 3.11 it is necessary to rewrite service track for the Head Alignment test, otherwise execution of the test will fail with erro...

Table of Contents:

Other Manuals for Canon WITE32

Summary

Other Canon Models