Canon VB-H710F- User Manual

Canon model VB-H700F A&E Specifications

OW NER / May 16, 2013

28 23 00 - 1

Video Surveillance System

SECTION 28 23 00

VIDEO SURVEILLANCE SYSTEM

DISCLAIMER FOR VIDEO SURVEILLANCE SPECIFICATIONS

The following is a recommended form of disclaimer with respect to the illustrative specifications for

the Video System Surveillance System using the Canon NVS camera systems. The disclaimer

presumes that the technical details in each of the illustrations, as set forth under Section 2.02 System

Specifications, have been reviewed and confirmed by Canon as meeting the technical specifications

for each of the relative product models as of the date hereof. Further, it is recommended that the

examples to be delivered include an embedded “watermark” or other reference on each page

indicating that they are “For Illustration Only”.
DISCLAIMER: These “Section 28 23 00 Video Surveillance System” specifications (the “Form

Specifications”) are general in nature and solely for illustration. The Form Specifications are not

intended for any specific application or use and project specific considerations must be taken into

account in the architect’s or engineer’s preparation of actual system specifications. Canon makes no

representation or warranty with respect to these Form Specifications and nothing contained herein

shall create, or be inferred to create, any express or implied warranty by Canon. These Form

Specifications are intended solely to for the purpose of reflecting general guidelines for video

surveillance system specifications, taking into account the features of the Canon model VB-H710F in

production as of the date hereof, as set forth under Sections 2.02 B through 2.02 P herein. Canon

reserves the right to change the features or specifications of the aforementioned model at any time,

without notice. The architect or engineer preparing the actual video surveillance specifications

should therefore refer to and confirm specifications for such model as of the date of use. Canon makes

nor representation or warranty about fitness of purpose of the above referenced model for any

intended application, which determination shall be the sole responsibility of others. Canon assumes

no liability with respect to, arising from, or arising out of the Form Specifications or any use thereof.

PART 1

GENERAL

1.01

SUMMARY

A.

Section Includes

1.

Camera Assembly (camera, lens, housing, mount, etc.)

B.

Contractor’s Responsibility

The Contractor shall provide and pay for all labor, materials, equipment, tools, utilities,
construction equipment and machinery, transportation and other facilities and services necessary
for the proper execution, operation and completion of the Work.

C.

Specification Language

Specifications and notes are written in imperative and abbreviated form. Imperative language of
the technical specifications is directed at the Contractor, unless specifically noted otherwise.
Incomplete sentences shall be completed by inserting “shall”, “shall be”, “the Contractor shall”,
and similar mandatory phrases by inference. The words “shall be” shall be supplied by inference
where a colon (:) is used within product specifications.

D.

Drawings And Specifications

1.

Contractor shall be provided three (3) sets of the Drawings and Specifications for his use.
Additional sets, if requested by Contractor, shall be furnished to the Contractor for the
actual cost of reproduction.

2.

Contractor shall carefully study the Drawings and Specifications, and shall at once report
any error, unforeseen circumstances, inconsistency or omission he may discover.