Page 2 - Contents; Specification
Contents Safety Precautions Notes Before it Works Serving ---------------------------------------------0-2 Specifications Specification --------------------------------------------------------------------1-2 Specifications ----------------------------------------------------------------------- 1-2 S...
Page 4 - Safety Precautions; Notes Before it Works Serving
Page 7 - Names of Parts; External View
1 1 1-2 1-2 Specifications > Specification > Names of Parts > Cross-Section View Specifications > Specification > Names of Parts > Cross-Section View Specification Specifications Specifications Item Specification Remarks Paper storage method Front loading method Pickup method Separ...
Page 8 - Installation; How to Check this
2 2 Installation Installation How to Check this Installation Procedure Checking the Contents Installation Procedure Adjustment ■ ■ ■ ■
Page 9 - How to Check this Installation Procedure; When using the parts included in the package; Symbols in the illustration; Points to Note at Installation
2 2 2 2 Installation > Points to Note at Installation Installation > Points to Note at Installation How to Check this Installation Procedure When using the parts included in the package A symbol is described on the illustration in the case of using the parts included in the package of this pro...
Page 10 - Checking the Contents; Contents of Cassette Spacer-A1
2 2 3 3 Installation > Checking the Contents Installation > Checking the Contents Checking the Contents CST. Feeding Unit-AE1 [1] Cassette Feeding Unit x 1 [2] Positioning Pin x 2 [3] Connecting Fixture x 1 [4] Connector Cover x 1 [5] Size Plate x 2 [6] Screw (RS Tightening; M3X8.5) x 5 < C...
Page 12 - Turning OFF the Host Machine
2 2 5 5 Installation > Unpacking Installation > Unpacking Turning OFF the Host Machine Turn OFF the main power switch on the host machine, and then remove the power plug from the outlet. Unpacking 1) Remove the container box. 2) Open the plastics, and remove the 2 pads by lifting the rear side...
Page 13 - Installation Procedure
2 2 6 6 Installation > Installation Procedure Installation > Installation Procedure Installation Procedure MEMO: Be sure to execute the following step 1) to 3) only when connecting with the 250-sheet cassette model. 1) When connecting with the 250-sheet cassette model, loosen the 2 Positioning...
Page 19 - Setting the Cassette
2 2 12 12 Installation > Setting the Cassette Installation > Setting the Cassette Setting the Cassette 1) Hold the Side Guide Plate Lever and set the Side Guide Plate to the specified size. At this time, set the Side Guide Plate to the click position (the position where you feel a click) by mo...
Page 20 - Adjustment
2 2 13 13 Installation > Adjustment Installation > Adjustment Adjustment Adjustment of Margin (1st side) MEMO: As for the adjustment method, the same procedure is applied to the Cassette 3 and 4. 1) Make a copy from the Cassette 3 and 4, and check that the left edge margin is 2.5+/-1.5mm. Feed...
Page 21 - Technology; Basic Configuratio
3 3 Technology Technology Basic Configuratio n Pickup/Feed System JAM Detection Power supply ■ ■ ■ ■
Page 22 - Function; Overview
3 3 3-2 3-2 Technology > Function > Pickup/Feed System > Overview Technology > Function > Pickup/Feed System > Overview Function Basic Configuration Sensor / Solenoid Pedestal right cover sensor(PS1) Cassette heater(H1) Pedestal controller PCB(UN1) Cassette 3 pickup motor(M1) Casse...
Page 23 - Sequence; Paper Size Detection
3 3 3-3 3-3 Technology > Function > Pickup/Feed System > Paper Size Detection Technology > Function > Pickup/Feed System > Paper Size Detection Sequence Cassette 3 pickup motor (M1) Cassette 3 pickup solenoid(SL1) Cassette 3 retry sensor (PS8) Registration clutch (CL33) First deriv...
Page 25 - Setting method when the size detection patterns are overlapped; Paper level sensor
3 3 3-5 3-5 Technology > Function > Pickup/Feed System > Paper level sensor Technology > Function > Pickup/Feed System > Paper level sensor Setting method when the size detection patterns are overlapped Size should be found manually on the check screen for the combination of A5-Ran...
Page 27 - JAM Detection; Delay JAM; Stationary JAM
3 3 3-7 3-7 Technology > Function > JAM Detection > Door open JAM Technology > Function > JAM Detection > Door open JAM JAM Detection Delay JAM In case that the leading edge of paper does not reach to the sensor within the specified time after the speed of Cassette 3 and 4 Pickup M...
Page 28 - Power supply; Power connection with each option
3 3 3-8 3-8 Technology > Function > Power supply > Power connection with each option Technology > Function > Power supply > Power connection with each option Power supply Power connection with each option Indicating the power supply path between the Printer and Option. Reader / ADF...
Page 30 - Parts Replacement; Remove from the host machine
4 4 4-2 4-2 Parts Replacement Procedure > Parts Replacement > Remove from the host machine Parts Replacement Procedure > Parts Replacement > Remove from the host machine Parts Replacement Remove from the host machine Before removing the host machine Remove the Connecter Cover <In the ...
Page 33 - Removing the Cassette Feed Roller; Removing the Separation Roller
4 4 4-5 4-5 Parts Replacement Procedure > Parts Replacement > Removing the Separation Roller Parts Replacement Procedure > Parts Replacement > Removing the Separation Roller Removing the Cassette Feed Roller Before removing the Cassette Feed Roller Remove the Cassette MEMO: This procedur...
Page 34 - Removing the Pickup Roller; Removing the Pickup Assembly Idler Gear
4 4 4-6 4-6 Parts Replacement Procedure > Parts Replacement > Removing the Pickup Assembly Idler Gear Parts Replacement Procedure > Parts Replacement > Removing the Pickup Assembly Idler Gear Removing the Pickup Roller Before removing the Cassette Pickup Roller Remove the Cassette How to...
Page 35 - Removing the Cassette 3 Pickup Unit
4 4 4-7 4-7 Parts Replacement Procedure > Parts Replacement > Removing the Cassette 3 Pickup Unit Parts Replacement Procedure > Parts Replacement > Removing the Cassette 3 Pickup Unit Removing the Cassette 3 Pickup Unit Before removing the Cassette 3 Pickup Unit 1) Open the Cassette Righ...
Page 36 - When Connecting to 1-Cassette Unit
4 4 4-8 4-8 Parts Replacement Procedure > Parts Replacement > Removing the Cassette 3 Pickup Unit > When Connecting to 1-Cassette Unit Parts Replacement Procedure > Parts Replacement > Removing the Cassette 3 Pickup Unit > When Connecting to 1-Cassette Unit 5)Remove the Right Rear ...
Page 38 - Removing the Cassette Size Detection Unit; Removing the Pickup Motor
4 4 4-10 4-10 Parts Replacement Procedure > Parts Replacement > Removing the Pickup Motor Parts Replacement Procedure > Parts Replacement > Removing the Pickup Motor Removing the Cassette Size Detection Unit Before removing the Cassette Size Detection Unit Remove the Right Front CoverRem...
Page 39 - Removing the Pedestal Controll PCB
4 4 4-11 4-11 Parts Replacement Procedure > Parts Replacement > Removing the Pickup Motor Parts Replacement Procedure > Parts Replacement > Removing the Pickup Motor 1) Remove the upper pickup motor. 1 connector3 screws x3 • • F-4-22 F-4-22 Removing the Pedestal Controll PCB Before remov...
Page 40 - Removing the Cassette Right Lower Cover
4 4 4-12 4-12 Parts Replacement Procedure > Parts Replacement > Removing the Cassette Right Lower Cover Parts Replacement Procedure > Parts Replacement > Removing the Cassette Right Lower Cover Removing the Cassette Right Lower Cover Before removing the Cassette Right Lower Cover Open th...
Page 41 - Maintenance; Periodical maintenance
5 5 Maintenance Maintenance Periodical maintenance Adjustment Parts Configuration / Rol e ■ ■ ■
Page 42 - Periodically replacement parts
5 5 5-2 5-2 Maintenance > Maintenance > Adjustment > Margin Adjustment Maintenance > Maintenance > Adjustment > Margin Adjustment Maintenance Periodical maintenance Periodically replacement parts N / A Consumables Parts Name Parts Number Num Interval Remarks Pickup roller FB6-3405 ...
Page 45 - Appendix; Service Tools
6 6 Appendix Appendix Service Tools General Circuit Diagram (1/3) General Circuit Diagram(2/3) General Circuit Diagram(3/3) ■ ■ ■ ■
Page 46 - Special Tools
6 6 6-2 6-2 Appendix > Service Tools > Special Tools Appendix > Service Tools > Special Tools Service Tools Special Tools In addition to the standard tools set, the following special tools are required when servicing the machine: Tool name Tool No. Ctgr Appearance Remarks Digital multime...
