Page 2 - Video Machine - Device Notes; Previous Page
Video Machine - Device Notes Blaupunkt Canon JVC Mitsubishi Otari Panasonic RICOH Sanyo Sony Tektronix [ Previous Page | Next Page <br>] © Copyright FAST Multimedia AG. All rights reserved.
Page 5 - Device Note; PAL
BlaupunktCCR-890 Device Note 06.09.95 Typ:System: Hi8 TV Standard: PAL Remote: LAN-C/Control L Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software setti...
Page 6 - © Copyright FAST Multimedia AG. All rights reserved.
Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE ISPROVIDED "AS-IS" SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKESNO WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIEDWARRANTIES OF MERCHANTABI...
Page 7 - VHS; None
BlaupunktRTV-830 Device Note 06.09.95 Typ:System: VHS TV Standard: PAL Remote: Edit-Control Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software settings...
Page 9 - BlaupunktRTV-846 HiFi; machine if not default:
BlaupunktRTV-846 HiFi Device Note 06.09.95 Typ:System: VHS TV Standard: PAL Remote: Edit-Control Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wenn vorhanden) Switch Position At front EDITING CONTROL EDIT (RECORDER) Kommentar: Connectors: Ort ...
Page 11 - settings at machine if not default:; Eintrag; Standard Einstellungen für Treiber/ Default settings for driver:
BlaupunktRTV-915 Device Note 06.09.95 Typ:System: S-VHS TV Standard: PAL Remote: Edit-Control Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wenn vorhanden) Switch Position At front Input Select S-Video Kommentar: nothing special Connectors: Ko...
Page 19 - REPRODUCED ON SUCH COPY.
REPRODUCED ON SUCH COPY. © Copyright FAST Multimedia AG. All rights reserved.
Page 31 - Canon
Canon EX-1 Device Note 06.09.95 Typ:System: Hi8 TV Standard: PAL Remote: Edit-Control Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software settings at ma...
Page 36 - Mini DV; Camera is up to 5 frames inaccurate.
Canon XL 1 Device Note 21.07.98 Typ:System: Mini DV TV Standard: PAL Remote: LAN-C/Control L Treiber: LANCRCTC.VMP FreigabeDatum: 20.01.98 Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorg...
Page 37 - Tested under WIN 98
Tested under WIN 98 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE ORTECHNOTE IS PROVIDED "AS-IS" SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'SCUSTOMERS. FAST MAKES NO WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING,WITHOUT LIMITATION, ANY IMPLIED WARRA...
Page 40 - JVC; Digital S
JVC BR-D50E Device Note 24.03.97 Typ:System: Digital S TV Standard: PAL Remote: RS 422 Treiber: SONYBC.VMP FreigabeDatum: 17.01.97 Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wennvorhanden) Switch Position At front COUNTER TC At front REMOTE 9PIN Kommentar: Connec...
Page 57 - Hardware Setup am Gerät: / Hardware setup at machine
JVC BR-S525E Device Note 06.09.95 Typ:System: S-VHS TV Standard: PAL / NTSC Remote: RS 422 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wenn vorhanden) Switch Position At front REC MODE CONTINUE Under front hidden AGC ON Kommentar: Connectors...
Page 66 - PAL NTSC
JVC BR-S811E/SA-F911E Device Note 06.09.95 Typ:System: S-VHS TV Standard: PAL NTSC Remote: RS 422 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wennvorhanden) Switch Position At front MODE PAY (PLAYER) Under front hidden SYNC SELECT INT Backsi...
Page 72 - TC board and TBC are optional
Tips und Tricks/ Trouble shooting: TC board and TBC are optional Further important adjustments in the software of the device:206 Audio2 LTC402 CTL drop frame Non drop407 Phase Correction bit ON
Page 74 - MII
JVC KR-M840EA Device Note 06.09.95 Typ:System: MII TV Standard: PAL Remote: RS 422 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software settings at machi...
Page 82 - MitsubishiHS-E82 PC VCR
MitsubishiHS-E82 PC VCR Device Note 07.09.95 Typ:System:TV Standard:Remote:Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software settings at machine if no...
Page 90 - Otari; DAT; Backside
Otari DTR-90 Device Note 06.09.95 Typ:System: DAT TV Standard:Remote: RS 422 9p Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Ort Connector Out (wennvorhanden) Connect to (In) Backside Ref video Ref out or composite out or YUVref out Kom...
Page 95 - NTSC
PanasonicAG-1970 Device Note 06.09.95 Typ:System:TV Standard: NTSC Remote: Edit-Control Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software settings at ...
Page 101 - TECHNOTE ASSUMES ALL RISKS CONCERNING ITS ACCURACY AND USE.
TECHNOTE ASSUMES ALL RISKS CONCERNING ITS ACCURACY AND USE. ALL WARRANTIES AND OTHER LIMITATIONS OF LIABILITY CONTINUE TO BE GOVERNED BY THELICENSE AGREEMENT AND WARRANTY CONTAINED IN YOUR ORIGINAL FAST PRODUCT. NOPORTION OF THIS KNOWLEDGEBASE OR TECHNOTE MAY BE COPIED, REPRODUCED ORDISTRIBUTED WITH...
Page 106 - As recorder the device is not able to perform a goto
AG-5700 = Rekorder Tips und Tricks/ Trouble shooting: As recorder the device is not able to perform a goto Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTEIS PROVIDED "AS-IS" SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS.FAST MAKES N...
Page 108 - Under front hidden
PanasonicAG-7150 Device Note 04.09.95 Typ:System: S-VHS TV Standard: PAL Remote: RS 232 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wennvorhanden) Switch Position Under front hidden TV SYSTEM PAL Kommentar: Connectors: Ort Connector Out (wen...
Page 146 - DVC PRO
PanasonicAJ-D650 Device Note 04.06.97 Typ:System: DVC PRO TV Standard: PAL Remote: RS 422 Treiber: SONYBC.VMP FreigabeDatum: 04.06.97 Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wennvorhanden) Switch Position At front TC INT At front VIDEO IN ANALOG At front MUSIC...
Page 154 - EDIT FIELD SELECT
PanasonicAU-65H Device Note 06.09.95 Typ:System: MII TV Standard: PAL Remote: RS 422 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software settings at mac...
Page 161 - Increase EDIT OFF DELAY, if you have blackframes as recorder
PanasonicNV-F 77EG Device Note 07.09.95 Typ:System: S-VHS TV Standard: PAL Remote: Edit-Control Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software sett...
Page 165 - PanasonicNV-FS 200 PC
PanasonicNV-FS 200 PC Device Note 04.09.95 Typ:System: S-VHS, VHS TV Standard: PAL Remote: RS 232 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wennvorhanden) Switch Position Under front hidden INPUT SELECT A4 Kommentar: Connectors: Kommentar:...
Page 166 - RTV-950 PC is the compatible driver
Tips und Tricks/ Trouble shooting: RTV-950 PC is the compatible driver
Page 178 - Sanyo
Sanyo GVR-S955 Device Note 06.09.95 Typ:System: S-VHS / VHS TV Standard: PAL Remote: RS 422 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wenn vorhanden) Switch Position At front SYNC SELECT EDIT (RECORDER) Backside Audio CH2 select Timecode K...
Page 188 - Sony
Sony BVU-870P Device Note 07.09.95 Typ:System: U-matic HB TV Standard: PAL Remote: RS 422 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software settings a...
Page 191 - Betacam
Sony BVW-15P Device Note 04.09.95 Typ:System: Betacam TV Standard: PAL Remote: RS 422 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wennvorhanden) Switch Position At front REMOTE 9P Under front hidden CAPSTAN LOCK 2FD Kommentar: Connectors: Or...
Page 199 - Betacam SP; After Cue Still
Sony BVW-60P Device Note 07.09.95 Typ:System: Betacam SP TV Standard: PAL Remote: RS 422 Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software settings at...
Page 217 - Video8
Sony CCD-FX 400E Device Note 07.09.95 Typ:System: Video8 TV Standard: PAL Remote: Edit-Control Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vorgabe: / Software setti...
Page 221 - at machine if not default:; Not optimised
Sony CCD-TR 2000E Device Note 07.09.95 Typ:System: Hi8 TV Standard: PAL Remote: LAN-C/Control L Treiber:FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wenn vorhanden) Switch Position At front CAMERA/PLAYER PLAYER at front by the display COUNTER/TIME CO...
Page 233 - DVC; You must have the Adapter VMC-LM7, to connect the LancControl.
Sony DCR-PC7E Device Note 06.02.97 Typ:System: DVC TV Standard: PAL Remote: LAN-C/Control L Treiber: LANCRCTC.VMP FreigabeDatum: 97/01/17 Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wenn vorhanden) Switch Position At front Power Player Kommentar: Connectors: Komme...
Page 235 - DV
Sony DCR-VX1000E Device Note 20.01.97 Typ:System: DV TV Standard: PAL Remote: LAN-C/Control L Treiber: LANCRCTC.VMP FreigabeDatum: 07.01.97 Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Kommentar: Software Einstellung am Gerät, wenn unterschiedlich von der Vor...
Page 238 - PAL Device has not any record modes
Tips und Tricks/ Trouble shooting: PAL Device has not any record modes Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE ORTECHNOTE IS PROVIDED "AS-IS" SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'SCUSTOMERS. FAST MAKES NO WARRANTY, WHETHER EXPRESS OR IMPLI...
Page 239 - Operation Panel; SET UP MENU
Sony DHR-1000VC Device Note 18.10.96 Typ:System: DV TV Standard: PAL Remote: LAN-C/Control L Treiber: LANCRCTC.VMP date:04.03.96 FreigabeDatum: Hardware Setup am Gerät: / Hardware setup at machine Switches: Ort Switch Name (wenn vorhanden) Switch Position Operation Panel Input Select used input conn...
Page 243 - TektronixPDR 100 Video Disk Recorder (Profile); Video Disk Recorder; Panel A was configured as follows:
TektronixPDR 100 Video Disk Recorder (Profile) Device Note 14.01.97 Typ:System: Video Disk Recorder TV Standard: NTSC/PAL Remote: RS 422 Treiber: SONYBC.VMP FreigabeDatum: 18.12.96 Hardware Setup am Gerät: / Hardware setup at machine Switches: Kommentar: Connectors: Ort Connector Out (wennvorhanden)...
Page 252 - Alladin cabling with VM / analog Devices
VideoMachine Alladin cabling with VM / analog Devices PIN/ Kabel 28.11.95 This cable plan displays the connection to the Alladin Media Printer together with two analog player devices and Y/Cplayer/recorder only. The DPR Out board is not involved in the process, thus you cannot use digitized material...
Page 254 - Edit Control Pin-Out Plan; Pin-Out Plan Panasonic Edit Control to 3.5 mm Stereo
VideoMachine Edit Control Pin-Out Plan PIN/ Kabel 06.09.95 Pin-Out Plan Panasonic Edit Control to 3.5 mm Stereo Plug (VM) Please observe that pins #1 and #5 on the 5 pin ECtrl plug are not connected. Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PRO...
Page 258 - Multi I/O Professionel Configuration
VideoMachine Multi I/O Professionel Configuration PIN/ Kabel 04.03.97 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHEREXPRESS OR IMPLIE...
Page 259 - Pin Connenction VM Board
VideoMachine Pin Connenction VM Board PIN/ Kabel 06.09.95 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHEREXPRESS OR IMPLIED (INCLUDING...
Page 261 - VMIO - RS232 cable for Blaupunkt RTV 950-PC
VideoMachine VMIO - RS232 cable for Blaupunkt RTV 950-PC PIN/ Kabel 06.09.95 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHEREXPRESS OR...
Page 262 - VMIO - RS232 cable for Mitsubishi E82
VideoMachine VMIO - RS232 cable for Mitsubishi E82 PIN/ Kabel 06.09.95 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHEREXPRESS OR IMPLI...
Page 266 - VMIO - RS232 for Pioneer Laserdisc Players
VideoMachine VMIO - RS232 for Pioneer Laserdisc Players PIN/ Kabel 06.09.95 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHEREXPRESS OR ...
Page 268 - VMSC box - RS232 cable for Mitsubishi E82
VideoMachine VMSC box - RS232 cable for Mitsubishi E82 PIN/ Kabel 06.09.95 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHEREXPRESS OR I...
Page 269 - VMSC box - RS232 cable for Philips VP-410
VideoMachine VMSC box - RS232 cable for Philips VP-410 PIN/ Kabel 06.09.95 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHEREXPRESS OR I...
Page 270 - VMSC box - RS232 cable for Pioneer Laserdisc Players
VideoMachine VMSC box - RS232 cable for Pioneer Laserdisc Players PIN/ Kabel 06.09.95 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHERE...
Page 275 - VMSC box - RS232 cable forr Blaupunkt RTV 950-PC
VideoMachine VMSC box - RS232 cable forr Blaupunkt RTV 950-PC PIN/ Kabel 06.09.95 Disclaimer: FAST'S SUPPORT SERVICE AND THE INFORMATION CONTAINED IN THIS DATABASE OR TECHNOTE IS PROVIDED "AS-IS"SOLELY FOR THE PERSONAL AND PRIVATE USE OF FAST'S CUSTOMERS. FAST MAKES NO WARRANTY, WHETHEREXPRE...
Page 278 - FAST VMPC; Technote; Vivanco VCR 5050 Panasonic EditControl ->Sony LanC convertor
FAST VMPC Technote Vivanco VCR 5050 Panasonic EditControl ->Sony LanC convertor 01.02.99 Description/ Symptoms: The Vivanco VCR 5050 Panasonic Edit 5pin to Sony LanC protocol convertor was tested in an attempt to provide a solution forcustomers wishing to use Panasonic Digital decks with the new ...
Page 279 - Clean re-installation instructions for VM-Studio
FAST VMPC Technote Clean re-installation instructions for VM-Studio 19.01.99 Description/ Symptoms: We recommend that you uninstall any previous versions of VM-Studio prior to installing version 3.3 and 3.98a. This technical note detailshow to uninstall an earlier version from Windows 95. Using the ...
Page 281 - VM Plus! Dongle Issues
FAST VMPC Technote VM Plus! Dongle Issues 08.12.98 Description/ Symptoms: The VM Plus! dongle is "transparent" to the system and so anything plugged into the back of it should still be able to communicate withthe computer effectively However, if you experience problems and can't connect the ...
Page 283 - How to Multilayer with Boris FX and VM Studio with VM Open
FAST VMPC Technote How to Multilayer with Boris FX and VM Studio with VM Open 06.11.98 Description/ Symptoms: 1. Using VM Open, convert a clip from the DPR to a full resolution, full quality AVI (a large system drive or separate SCSI AV drive other than your DPR drives comes in handy at this point!)...
Page 287 - New Panasonic Digital time code and Video Machine
FAST VMPC Technote New Panasonic Digital time code and Video Machine 05.11.98 Description/ Symptoms: The time code used on the new Panasonic digital decks, such as the AG EZ-, NV DV- and NV DX- range is a digital time code. Thesedevices have a problem translating this digital time code into analogue...
Page 288 - Hardware Suggestion for VM Systems
FAST VMPC Technote Hardware Suggestion for VM Systems 04.11.98 Description/ Symptoms: FAST tries to test as many hardware components as possible. However, due to the nature of the fast changes in this market there is no100% guarantuee that every new revision of any given component will work as teste...
Page 290 - Drop Frame vs. Non Drop Frame with VM
FAST VMPC Technote Drop Frame vs. Non Drop Frame with VM 30.10.98 Description/ Symptoms: If you encounter the message "The TC format reported by the player does not match the format specified in reel (PAL/NTSC or DF/NDF mismatch)" , make sure that you have selected Drop Frame (DF light green...
Page 291 - Black and White Picons
FAST VMPC Technote Black and White Picons 28.10.98 Description/ Symptoms: There are Two main reasons why your picons may be in black and white in you project manager. 1. You have not selected the proper decoder in the Tools > Device Setup > Name of Machine > Decoder > Choose S-Video or C...
Page 293 - Tip for keying Crystal 3D Impact Pro graphics with VM
FAST VMPC Technote Tip for keying Crystal 3D Impact Pro graphics with VM 29.10.98 Description/ Symptoms: After making graphic in 3D impact Pro > go to Render > Set Background > Choose Select Color > choose Black >go to Animation > Assign Motion (assign any since you are just using ...
Page 294 - DSR 60 with VM
FAST VMPC Technote DSR 60 with VM 12.10.98 Description/ Symptoms: If you experience problems with your DSR-60 performing an edit (the machine will try several times, but stops at the edit point). Go to Tools > Device Setup > Highlight the DSR-60 > Choose Setup and un-check "Can Compensa...
Page 303 - FAST turnkey DPR drive integration
FAST VMPC Technote FAST turnkey DPR drive integration 17.07.98 Description/ Symptoms: Contents: I. Basic Information about Hard DisksII. Preparing the hard disks and the DPRIII. Installing the hard disks in your PCIV. Software PerimetersV. General DPR Information I. Basic Information about Hard Disk...
Page 306 - Calibrating LanC and Edit Control Devices
FAST VMPC Technote Calibrating LanC and Edit Control Devices 07.11.97 Description/ Symptoms: Calibrating your machine in this way may remedy a constantly recurring editing error that has resulted in black or missing frames. Machines that are controlled by the LanC or Ectrl protocols may exhibit rand...
Page 309 - Luma and Chroma Keying with VM/DPR
FAST VMPC Technote Luma and Chroma Keying with VM/DPR 07.11.97 Description/ Symptoms: You want to use VM and the DPR to make parts of a video clip transparent, and to make another video source visible through thetransparent parts.VM lets you use the Timeline to change the transparency of color or br...
Page 311 - How can I use the DPR to produce video CDs? (DPR to AVI conversion); There are three ways of producing AVI files from DPR clips:
FAST VMPC Technote How can I use the DPR to produce video CDs? (DPR to AVI conversion) 05.11.97 Description/ Symptoms: You have used the VM/DPR to create several clips and now want to use these to produce an AVI or an MPEG-1 file in order toburn it onto a CD, for example. Background: In producing a ...
Page 315 - DPR: Importing AVI Files/ Video Machine DPR System
FAST VMPC\DPR Technote DPR: Importing AVI Files/ Video Machine DPR System 23.12.96 Description/ Symptoms: Background: Use the following steps to import an AVI file Solution: 1) Open the Group menu in VM program choose,Create an animation group. 2) Give a name and number for the reel, in the group se...
Page 317 - Starting PCs in Different (DPR) Configurations
FAST VMPC Technote Starting PCs in Different (DPR) Configurations 31.10.96 Description/ Symptoms: You want to start your VM-DPR system without the DPR, meaning that you want to prevent the drivers dp.sys and the batch filedigital.bat from being executed.As of DOS version 6.0, you have the option of ...
Page 319 - Fading in 4 Clips Simultaneously
FAST VMPC Technote Fading in 4 Clips Simultaneously 31.10.96 Description/ Symptoms: You want to create a sequence in VM-Plus in which four video clips are shown on screen at the same time whereby each clip fills onequarter of the screen. Use the following steps to produce this effect: Select the Gen...
Page 321 - Interesting facts about the FAST Hardlock Twin
FAST VMPC Technote Interesting facts about the FAST Hardlock Twin 14.10.96 Description/ Symptoms: I - Hardlock Twin 1. Hardlock cannot be found on the parallel port 1.1. "Difficult" interfaces Problems may occur when the Hardlock is queried at weak interfaces, particularly when a cable or an...
Page 326 - Creating a WaterRipple effect with VM-Studio PLUS
FAST VMPC Technote Creating a WaterRipple effect with VM-Studio PLUS 17.09.96 Description/ Symptoms: Use the following steps to create a WaterRipple effect. All instructions are optional. You can make changes at any time to produce your ownpersonalized effect. In this example, we use only two clips....
Page 330 - How to create a fade to/from a certain color
FAST VMPC Technote How to create a fade to/from a certain color 24.10.97 Description/ Symptoms: You want to generate a fade to/from white (or the color of your choice) or a special color effect. Background: Solution: 1. The following paragraph describes how to create a fade to white (or the color of...
Page 332 - Video Cabling with VM-Studio 3.0 and Cable Splitter
FAST VMPC Technote Video Cabling with VM-Studio 3.0 and Cable Splitter 28.05.96 Description/ Symptoms: No video out when a video source is connected to In2 at the cable splitter. Background: Because VM-Studio supports Alladin Mediaprinter, the input is always routed to framestore 1 when working in t...
Page 333 - Overlay Animation
FAST VMPC\DPR Technote Overlay Animation 25.01.96 Description/ Symptoms: You want to record a single-frame animation consisting of frames containing an alpha channel (e.g. 32-bit *.tga graphics produced inPhotoshop) with a digital DPR clip in the background. Background: In Video Machine, the DPR can...
Page 334 - Video Machine - Technotes
Video Machine - Technotes 31 Overlay Animation 30 Framegrabbing with the DPR 28 Copying/Generating VM VITC 27 DPR-Audio: A-Z 25 DPR: Managing and Deleting DPR Clips 24 Interference in clip picons 22 DP/R: RAM Upgrade 21 DP/R: Use of a Live Player 20 DP/R: Importing WAVE Files 19 PAL/NTSC Conversion ...
Page 335 - Framegrabbing with the DPR
FAST VMPC\DPR Technote Framegrabbing with the DPR 04.01.96 Description/ Symptoms: You are using digitized clips or animations and want to save one single frame from one or the other as a graphic. Background: Solution: There are several ways of doing so: 1) Play the clip in a loop and save the frame:...
Page 337 - Copying/Generating VM VITC
FAST VMPC Technote Copying/Generating VM VITC 17.08.95 Description/ Symptoms: A recorded tape without VITC is to be copied using Video Machine. VM VITC is to be copied onto the master by Video Machine. Background: Video Machine converts the incoming analog video signal into a digital signal that is ...
Page 343 - DPR: Managing and Deleting DPR Clips
FAST VMPC\DPR Technote DPR: Managing and Deleting DPR Clips 17.08.95 Description/ Symptoms: You want to execute the command "Destroy unused DPR data" and avoid losing data accidentally. Background: A DPR reel in a project corresponds to a directory on the DPR hard disks. If you give the same...
Page 344 - Interference in clip picons
FAST VMPC Technote Interference in clip picons 18.06.98 Description/ Symptoms: You have installed VM and discover that the picture is full of noisy interference or is completely white or black when definingclips or grabbing graphics. Background: There is a video frame buffer on VM whose contents are...
Page 352 - PAL/NTSC Conversion with Video Machine
FAST VMPC Technote PAL/NTSC Conversion with Video Machine 17.08.95 Description/ Symptoms: Video Machine can also be used as a standard converter. This means that existing television standards (PAL or NTSC) can be convertedinto another standard.. Background: The most important standard conversion is ...
Page 354 - Video Machine and the ATI Ultra Pro Graphics Card
FAST VMPC Technote Video Machine and the ATI Ultra Pro Graphics Card 17.08.95 Description/ Symptoms: 1. Video Machine is already installed and the ATI Ultra Pro graphics card is added to your system. After having installed the ATI Ultra Proand the MACH32 driver, the VM-Studio software can no longer ...
Page 355 - VITC on the Master Video Recorder
FAST VMPC Technote VITC on the Master Video Recorder 17.08.95 Description/ Symptoms: You want to be able to read the VITC from your master tape.Your master tape has been corrrectly precoded and/or and or picture information with VITC is already recorded on the tape. Background: As with the players, ...
Page 356 - Audio Dub with Consumer Recorders
FAST VMPC Technote Audio Dub with Consumer Recorders 17.08.95 Description/ Symptoms: After you have edited and recorded your video and the original sound as the first step, you now want to go on to the next editing step, therecording of "external sound", for example, dubbing in background mu...
Page 358 - Simultaneous Playback of Roll/Crawl Titles and Effects
FAST VMPC Technote Simultaneous Playback of Roll/Crawl Titles and Effects 17.08.95 Description/ Symptoms: You want to insert a roll or crawl title through an effect (e.g., tumbles, shrinks or moves). The resulting video image is faulty (jumps, notransparency, etc). Background: If Video Machine creat...
Page 359 - Two Simultaneous Roll & Crawl Titles
FAST VMPC Technote Two Simultaneous Roll & Crawl Titles 17.08.95 Description/ Symptoms: You place roll and crawl titles parallel on both channels. They are displayed in preview without any problems. During playback on thetimeline the overlapping titles are not displayed properly. Background: Dur...
Page 360 - Timing with Alpha Wipes
FAST VMPC Technote Timing with Alpha Wipes 17.08.95 Description/ Symptoms: You place effects from the Alpha Wipe Library (matrix, pattern, rotation and special alpha wipes) on the timeline. Playback is faulty. Background: During editing all alpha wipes on the timeline are prepared by the computer. T...
Page 361 - Titles with MS WinWord
FAST VMPC Technote Titles with MS WinWord 17.08.95 Description/ Symptoms: You want to assign a title to your video using the software MS WinWord. You have selected "Build one Page" in the VM Title Driver. During preview you notice that the last part of the title, i.e. the lower margin of you...
Page 363 - Vertical Image Shift; Installation\Studio Control Box\Reference Signal
FAST VMPC Technote Vertical Image Shift 17.08.95 Description/ Symptoms: When operating Sony Betacam equipment with Video Machine the looped video image from the Betacam (the monitor is connected to Recorder Output/Monitor Out ) is vertically shifted. Background: Vertical image shifts occur on the Be...
Page 364 - Image Dropout during Fast Shuttle Operation
FAST VMPC Technote Image Dropout during Fast Shuttle Operation 17.08.95 Description/ Symptoms: During fast shuttle operation the video image disappears from the master monitor. Background: High shuttle speeds disrupt the "sync" of the video signal. If the sync is missing or badly disrupted V...
Page 365 - -Field Sequence with PAL
FAST VMPC Technote 8-Field Sequence with PAL 17.08.95 Description/ Symptoms: You notice flashing (false color image) at the editing points of the master tape. Background: False color images are the result of the 8-field sequence occurring with the PAL standard. Flashing at the editing points is an i...
Page 366 - Timecode Error
FAST VMPC Technote Timecode Error 24.10.97 Description/ Symptoms: When working with a source tape that was not recorded in a single shot, the video unit winds to the wrong position. Background/Explanation: Information regarding position on the source tape (timecode or CTL) is not continuous.This may...
Page 368 - Preroll Times
FAST VMPC Technote Preroll Times 24.10.97 Description/ Symptoms: You have no problems controlling video players or recorders in the clip editor. However, errors occur once you have positioned a clip onthe timeline and it begins to play back (for example, the unit winds the tape to the beginning or e...
Page 370 - Black Frames in Insert Mode
FAST VMPC Technote Black Frames in Insert Mode 17.08.95 Description/ Symptoms: When editing with Video Machine in insert mode, one or more black frames appear between video images recorded earlier and thosesubsequently inserted. Background: The insert mode is used for subsequently inserting individu...
