Canon SE-IE-1359-V2- User Manual

v Preface Please read this manual thoroughly before operating the application to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference.

vi How To Use This Manual Notations Used in This Manual The following notations are used in this manual to explain procedures and restrictions. IMPORTANTIndicates operational requirements and restrictions. Be sure to read these items carefully to operate the machine correctly, and avoid damage to th...

vii Displays Used in This Manual The computer operation screenshots and Canon device touch panel display screenshots may differ from those you actually see, depending on the system environment you are using.The buttons which you should click or press are marked with a , as shown below. When multiple...

viii Trademarks MEAP and the MEAP logo are trademarks of Canon Inc. Windows and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the U.S. and/or other countries. Other product and company names herein may be the registered trademarks or trademarks of their respect...

Features 1-2 Features PullPrint Service Provider is an application that downloads data from the network and prints it. PullPrint Service Provider Canon Business Imaging Online Print request Print completion notification Print Print data download 1 3 Print data download request 2 4 5

Features 1-3 Flow of Operations Confirm the conditions and specify the settings following the procedure below. Setting Up PullPrint Service Provider 1 Computer Requirements (p. 1-4) Confirm the Web browser requirements. 2 Supported Devices (p. 1-4) Confirm the device compatibility. 3 Installation an...

System Requirements 1-4 System Requirements The system requirements for PullPrint Service Provider are as follows. Computer Requirements Web Browser Windows Internet Explorer 7.0Windows Internet Explorer 8.0Windows Internet Explorer 9.0 MEAP Device System Resources The system resources below are req...

Installation and Setup Flow 2-2 Installation and Setup Flow The flow of installing and setting up PullPrint Service Provider is as follows. 1. Starting and Logging In to SMS (p. 2-3) 2. Installation (p. 2-9) 3. Starting an Application (p. 2-13) 4. Confirming PullPrint Service Provider Settings (p. 2...

Starting and Closing SMS 2-3 Starting and Closing SMS You must log in to SMS (Service Management Service) to install PullPrint Service Provider.SMS is software that can access the printer via the network from your Web browser, enabling you to install and manage PullPrint Service Provider. NOTE The d...

Starting and Closing SMS 2-4 Logging In Using the Shared Password for SMS You can access SMS by logging in from the SMS login page using the password set in SMS. ---- 1. Enter the URL below in the address bar of the Web browser. http://<IP address of the device>:<HTTP port number>/sms IM...

Starting and Closing SMS 2-6 Logging In Using a User Name and Password for Canon Device Login You can access SMS by logging in using a user name and password used for the SDL, SSO, or SSO-H login service.Only users registered as administrators can log in. ---- 1. Enter the URL below in the address b...

Starting and Closing SMS 2-7 Logging Out from SMS Log out to finish the operation. ---- 1. Click [Log Out from SMS]. The [Login] page is displayed. IMPORTANTWhen you finish using SMS, make sure you log out. If you close the Web browser without logging out, SMS becomes temporarily inaccessible.

Installing and Uninstalling PullPrint Service Provider 2-8 Installing and Uninstalling PullPrint Service Provider Install PullPrint Service Provider and the license file. IMPORTANT A valid license file is required to install a MEAP application. If your application comes with a License Access Number,...

Installing and Uninstalling PullPrint Service Provider 2-9 Installation Install PullPrint Service Provider. ---- 1. Click [Install MEAP Application]. The [MEAP Application Management] page is displayed. 2. Click [Browse] → select the application file and license file to install → click [Install]. Ap...

Installing and Uninstalling PullPrint Service Provider 2-11 Uninstallation Uninstall the installed PullPrint Service Provider. NOTEThe license files must be disabled before uninstalling PullPrint Service Provider. For more information on disabling a license file, see the manual accompanying your dev...

Starting and Stopping an Application 2-13 Starting and Stopping an Application You can start or stop the installed PullPrint Service Provider. IMPORTANTEven if installation is complete, you cannot use PullPrint Service Provider on your system until you start the application. Starting an Application ...

Starting and Stopping an Application 2-15 Stopping an Application Stop PullPrint Service Provider. NOTETo update an application, you must close the application you want to update. ---- 1. Click [MEAP Application Management]. The [MEAP Application Management] page is displayed. 2. Click [Stop] for th...

Confirming Application Details 2-16 Confirming Application Details You can confirm the details of PullPrint Service Provider. ---- 1. Click [MEAP Application Management]. The [MEAP Application Management] page is displayed. 2. Click [PullPrint Service Provider] displayed in [Application Name]. The [...

Confirming PullPrint Service Provider Settings 2-17 Confirming PullPrint Service Provider Settings To use PullPrint Service Provider after installing it in a MEAP-compatible Canon device, you must correctly specify PullPrint Service Provider settings.You can use the Management Console to confirm Pul...

PullPrint Service Provider Settings 3-2 PullPrint Service Provider Settings The following methods are available for specifying PullPrint Service Provider settings: Specifying Settings from a Web Browser (p. 3-3)Specifying Settings from the Settings File (p. 3-6) Setting Precautions Web browser: Do n...

PullPrint Service Provider Settings 3-3 Specifying Settings from a Web Browser The procedure for specifying settings from a Web browser is as follows. 1. Enter the URL below in the address bar of the Web browser. http://<IP address of the device>:8000/PullPrintServiceProvider/Consoleorhttps://...

PullPrint Service Provider Settings 3-6 Specifying Settings from the Settings File The procedure for downloading the settings file and specifying the settings is as follows. 1. Enter the URL below in the address bar of the Web browser. http://<IP address of the device>:8000/PullPrintServicePro...

Setting Item List 3-9 Setting Item List Management Console setting items and setting content are described below.If you change the settings, it is necessary to restart PullPrint Service Provider in SMS.

Setting Item List 3-10 PullPrint Service Provider Settings Various PullPrint Service Provider settings RawPort Setting Raw Print Port Number for deviceSet within range of 1 to 65535 •• Default Value 9100 Settings file name ServiceProvider.RawPort LogLevel Setting Log output levelSet within range of ...

Setting Item List 3-11 Proxy Settings Setting Using device proxyNot selected: Do not use device proxy settings (0) When not using a proxy, a DNS server address must be set in the device settings. Selected: Use device proxy settings (1) When using a proxy, proxy settings must be set in the device set...

Setting Item List 3-12 Register Allowed Print Data Sources This setting allows the connection destination when PullPrint Service Provider retrieves print data.For Canon Business Imaging Online, you must allow prnpprv.a01.c-aas.com:443. Host Name and Port Number Setting Host Name: Port NumberSeparate...

Setting Item List 3-13 Single Sign-on User Settings Register the user names or Department IDs that skip the Login screen of the Management Console.Separate each user with a comma (",") when specifying multiple users. User Name Setting User Name or Department IDSeparate with line break (enter...

Changing a Password 3-14 Changing a Password The procedure for changing the password for a PullPrint Service Provider login account is as follows. ---- 1. Enter the URL below in the address bar of the Web browser. http://<IP address of the device>:8000/PullPrintServiceProvider/Consoleorhttps:/...

Changing the Display Language 3-17 Changing the Display Language The procedure for changing the display language of the Management Console is as follows. 1. Enter the URL below in the address bar of the Web browser. http://<IP address of the device>:8000/PullPrintServiceProvider/Consoleorhttps...

List of Error Messages 4-2 List of Error Messages This section lists the PullPrint Service Provider error messages and their remedies. Status Display Error Messages Error Message Remedy The application has stopped because device event subscription could not be executed. Restart the device. Restart t...