Canon s2is - PowerShot S2 IS Digital Camera- User Manual
Canon s2is - PowerShot S2 IS Digital Camera– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Overview; only; OSD only
- Page 4 – Getting Started; use playback mode
- Page 5 – Compatibility
- Page 7 – Power Supply; Configuration; Channels
- Page 8 – Functions of the on-board button; Configuration Software
- Page 9 – Firmware Upgrade; Camera Settings; Camera; Command
- Page 10 – Device Settings
- Page 11 – Control Mode
- Page 13 – Support
- Page 14 – Troubleshooting; Problem; Specification
CAMremote-2
Users Manual
Applies to:
Configuration Software Ver.2.0.0
PCB Revision 2.0
© 2009 VP-Systems
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Overview The CAMremote-2 (CR) is a highly integrated device which is designed for many kinds of remote photography. The main features of the CR are: ● Triggers the shutter of the camera using the following methods:- USB remote control using Picture Transfer Protocol if available (USB/PTP) - CR-2 PRO...
Getting Started This chapter gives brief instructions how to set up the CR with an R/C receiver or servo motors. Not all possible scenarios are covered here. It is highly recommended that the user read the entire manual prior to using the CR. Begin with step 6 once the CR has been configured by you ...
Compatibility The CR is able to release the shutter with the SERVO-FINGER method on any camera but if the camera has a built in remote function then there are additional options available for remote control. Currently, the CR is able to handle several USB/PTP, USB/CHDK, USB/CA1, PORT/E3 and IR suppo...
