Canon MAG 10HS - Manual
Canon MAG 10HS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Parts Description; This relays the cable at the end of the boom to lower the weight.; Introduction to Controlled Depth Fishing; Undoubtedly there are many fishermen
- Page 3 – Downrigger Mounting on Boats; A downrigger should be mounted where ever it; Mounting Accessories; Deck Plates
- Page 4 – Side Rail Mounting; Side/Rail mounts can be mounted to a
- Page 5 – FOR MAG 10 HS and MAG 10 TS:; If access to the underside of the deck is not; Installing the Base on Your Boat; Where access to the underside of the deck is; Wellnuts; Low-Profile Swivel Base; Base
- Page 6 – Attaching the Boom; Telescopic Boom
- Page 7 – Terminating the Downrigger Cable; The Cannon Uni-Release attaches directly to
- Page 8 – Attaching the Rod Holder; The positive lock rod holder incorporates a; Single Rod Holder Assembly; Star Washer; Dual Rod Holder Assembly
- Page 9 – Wiring Your Downrigger; Your Boat's Electrical Condition; Battery
- Page 10 – Operating Your Downrigger; Lowering the Weight; Raise
- Page 11 – Adjusting the Depth Meter; The Cannon Depth Meter provides non-slip; The Short Stop System; The Short Stop system is composed of three; Maintaining Your Downrigger; Periodically, lightly grease the thrust bearing
- Page 12 – The Positive Ion Control System; How the Positive Ion Control System Works; Blowback
- Page 13 – Trouble Shooting; al De; Blowback Charts
- Page 14 – Ten Good Trolling Tips; over the boat side before
- Page 15 – CANNON® LIMITED WARRANTY
- Page 16 – ENVIRONMENTAL COMPLIANCE STATEMENT:
OWNER’S MANUAL
NOTE: Do not return your CANNON® Downrigger to your
retailer. Your retailer is not authorized to repair or replace
this unit. You may obtain service by:
•
calling CANNON® at 1-800-227-6433;
•
returning your downrigger to the Factory Service
Center;
•
sending or taking your downrigger to any CANNON®
Authorized Service Center on enclosed list.
Please include proof of purchase, serial number and
purchase date for warranty service with any of the
above options.
CAUTION:
READ THIS MANUAL CAREFULLY
BEFORE OPERATING YOUR NEW
CANNON
®
DOWNRIGGER.
RETAIN FOR FUTURE REFERENCE.
MAG 10TS
MAG 10HS
MAG 5HS
Introduction to Downriggers
pg. 2
Mounting Your Downrigger
pg. 2-6
Terminator & Line Release
pg. 7
Cannon Uni-Release
pg. 7
Attaching the Rod Holder
pg. 8
Wiring Your Downrigger
pg. 9
Operating Your Downrigger
pg. 10-11
The Short Stop System
pg. 11
Maintaining Your Downrigger
pg. 11
Positive Ion Control
pg. 12
The Effects of Blowback
pg. 12-13
Troubleshooting
pg. 13
Trolling Tips
pg. 14
Warranty Information
pg. 15
Cannon Service Policy
pg. 15
Authorized Service Centers
See List
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Parts Description 1. Reel This is used to spool the cable, available in lengths ranging from 150 to 400 feet. 2. Boom This is used to extend the weight out from the body of the downrigger and has a pulley fixed to its end. Boom lengths range from 24 to 53 inches. 3. Swivel Head This relays the cab...
3 Downrigger Mounting on Boats A downrigger should be mounted where ever it is easy to operate and observe. You want to be able to see your fishing rod and to react quickly. So, choosing a good spot to mount your downrigger on your boat is 99% of the job. Due to the great variety of boats available,...
4 Side Rail Mounting Side/Rail mounts can be mounted to a welded T-section. It can also be used at the two rail section butt joint. In both installations it is recommended to use a non-slip material, such as rubber or a thin wood sheet, between metal surfaces. You can also use these for mounting to ...
